Abstract:Introduction: Esophageal stenting is a widely used treatment for esophageal diseases, which can also be used for adjuvant therapy and feeding after chemotherapy for esophageal cancer. The structural parameters of the stent have a significant impact on its mechanical properties and patient comfort.Methods: In the present work, we reconstructed the esophagus model based on the patient’s computed tomography (CT) data, and designed stents with different structural parameters. We used 3D printing technology to achieve rapid production of the designed stents by using Thermoplastic polyurethane (TPU)/Poly-ε-caprolactone (PCL) blends as the materials. The mechanical properties and effects on the esophagus of polymer stents with four different structural parameters of diameter, wall thickness, length and flaring were investigated by in vitro tests of radial compression and migration of the stents, as well as by finite element simulations of the stent implantation process in the esophagus and of the stent migration process. An artificial neural network model was established to predict the radial force of the stent and the maximum equivalent stress of the esophagus during implantation based on these four structural parameters.Results: The results show that wall thickness was the structural parameter that had the greatest impact on the radial force of the stent (statistically significant, p < 0.01), and flaring was the structural parameter that had the greatest impact on the maximum equivalent stress of the esophageal wall after stent implantation (statistically significant, p < 0.01). No. 6 stent had a maximum radial force of 18.07 N, which exceeded that of commercial esophageal stents and had good mechanical properties. And the maximum equivalent force on the esophagus caused by its implantation was only 30.39 kPa, which can improve patient comfort. The predicted values of the constructed back propagation (BP) neural network model had an error of less than 10% from the true values, and the overall prediction accuracies were both above 97%, which can provide guidance for optimizing the design of the stent and for clinical research.Discussion: 3D printing technology presents a wide range of applications for the rapid fabrication of personalized TPU/PCL blend stents that are more suitable for individual patients.

Biomechanical properties of a customizable TPU/PCL blended esophageal stent fabricated by 3D printing

Study on the Biomechanical Properties of 3D Printed Blended Esophageal Stents with Different Structural Parameters Based on Patient CT

Numerical Study of the Biomechanical Behavior of a 3D Printed Polymer Esophageal Stent in the Esophagus by BP Neural Network Algorithm

Innovative Design of a 3D Printed Esophageal Stent Inspired by Nature: Mitigating Migration Challenges in Palliative Esophageal Cancer Therapy

Development of Three-Dimensionally Printed Vascular Stents of Bioresorbable Poly(l-Lactide-co-caprolactone).

Fabrication and evaluation of polymer-based esophageal stents for benign esophagus stricture insertion

Towards a Customizable, SLA 3D-Printed Biliary Stent: Optimizing a Commercially Available Resin and Predicting Stent Behavior with Accurate In Silico Testing

Development of 3D-Printed Sulfated Chitosan Modified Bioresorbable Stents for Coronary Artery Disease

3D printed peripheral vascular stents based on degradable poly(trimethylene carbonate-b-(L-lactide-ran-glycolide)) terpolymer

Whole Model Path Planning‐Guided Multi‐Axis and Multi‐Material Printing of High‐Performance Intestinal Implantable Stent

Design of novel poly(L-lactide)-based shape memory multiblock copolymers for biodegradable esophageal stent application

A Novel Paclitaxel Eluting Bioresorbable Coronary Stent 3D Printed from a Tougher and Faster Degradation Poly(L-Lactide-Co-Caprolactone) Co-Polymer

Computational Analysis of Polymeric Biodegradable and Customizable Airway Stent Designs

A Shape Memory Stent of Poly(ε-Caprolactone-co-dl-lactide) Copolymer for Potential Treatment of Esophageal Stenosis

<scp>3D</scp> printed peripheral vascular stents based on degradable poly(<scp>trimethylene carbonate‐b‐(L‐lactide‐ran‐glycolide)</scp>) terpolymer

Experimental Study of Polymeric Stent Fabrication Using Homemade 3D Printing System

Fabrication of a Delaying Biodegradable Magnesium Alloy-Based Esophageal Stent Via Coating Elastic Polymer.

3D Printing and Characterization of the Biodegradable Vascular Stent

Digital Light 3D Printing of Customized Bioresorbable Airway Stents with Elastomeric Properties.

Mechanical Properties and In Vitro Evaluation of Thermoplastic Polyurethane and Polylactic Acid Blend for Fabrication of 3D Filaments for Tracheal Tissue Engineering

Method for preparing personalized bionic drug eluting coronary stent by using 3D printing technology