Abstract:Fatigue indicator parameters (FIPs) serve as the measurement of the driving force for fatigue crack initiation (FCI). The extreme value distributions of FIPs for fatigue life scatter (i.e., fatigue crack initiated from surface or subsurface) in the high cycle fatigue (HCF) to very high cycle fatigue (VHCF) regime are computed of AA7075-T6. The FIPs are averaged in the volume of sub-band in the scale of sub-grain proposed based on the concept of slip system of AA7075-T6 where sub-bands are extracted from statistical volume elements (SVEs) using open-source called Dream-3D. SVEs are built via the experimental crystalline microstructure. The material response variables required in the computation of FIPs are obtained by embedding crystal plasticity theory to the crystal plasticity finite element model via open-source software PRISMS-Fatigue. To meet statistical requirements, 50 instantiations of SVEs are modeled for both traction-free and fully periodic boundary conditions, respectively, corresponding to the surface and subsurface cases under different strain amplitudes (i.e., 0.362%, 0.312%, 0.289%, and 0.254%). It is found that the FIPs are higher under high stress levels indicating that fatigue crack tends to initiate at high stress levels. In addition, the low driving force can be found in the simulations with fully periodic boundary conditions throughout the SVEs, whereas the higher FIPs under traction-free boundary conditions tend to form close to the free surface under cyclic loading conditions. Furthermore, the highest FIPs have a propensity to scatter along with the depth of SVEs with the traction-free surface under strain amplitude of 0.254%, which means the fatigue life in the VHCF regime has a higher scatter. The interactions between the high symmetry of FCC crystalline structure and free surface combining the loading amplitudes have a compound effect on the FIPs, especially at low stress amplitudes, which also has a greater impact on the ultra-high-cycle fatigue life. To this end, the VHCF and HCF experiments are performed under an ultrasonic fatigue experimental system with a frequency of 20 kHz with different stress levels corresponding to the strain amplitude in the simulations. Besides, the morphology fracture surface of presentative samples was observed via the scanning electron microscope (SEM). The comparison between the simulation and the experimental results indicates that the EVD of FIPs is efficient in preciously predicting the FCI and well explain the fatigue life scatter of the AA7075-T6 in the HCF to VHCF regime.

A method to estimate fatigue limit using (1/N f )-S curve

Using a reverse life plot for estimating fatigue endurance/limit

Evaluation of finite high cycle fatigue life of hard steels using the elliptical curve method

An Approach to Estimate the Low Cycle Fatigue Probabilistic Curves of PBF-LB/M 316L Steel from Small Size Datasets Using the Remora Optimization Algorithm

A New Method for Studying the Effect of Multiaxial Strain States on Low Cycle Non-Proportional Fatigue Prediction

Two-Parameter Characterization of Low Cycle, Hysteretic Fatigue Data

Determination of the fatigue P-S-N curves – A critical review and improved backward statistical inference method

A unified estimation method for gear fatigue P-S-N curves and fatigue limits based on ensemble learning and data augmentation

Estimating the S-N Curve by Machine Learning Random Forest Method

A New Method for Low Cycle Fatigue Life Prediction

S–N curves established from limiting energy in the case of specimens additively manufactured from AlSi10Mg

Experimental Verifications of the Applicability of the Wöhler Curve Method for a Low-Cycle Fatigue of Metallic Materials

Quantitative review of probabilistic approaches to fatigue design in the medium cycle fatigue regime

The Wöhler Curve Method for a low/medium/high cycle fatigue of metals

Notch S-N Curve Method for fatigue life analysis of notch components of metals in low/medium/high cycle fatigue regime

Investigation of the Fatigue Life Scatter for AA7075-T6 Using Crystal Plasticity Finite Element Method in the High to Very High Cycle Fatigue Regime

Reliability Estimation of Fatigue Life for Machine Parts under Uniaxial Constant Amplitude Load

The hysteresis loop on the near-threshold fatigue crack growth curves generated by stepped load reduction and constant-amplitude loading methods in a Ni-based superalloy

High-cycle and low-cycle fatigue life prediction under random multiaxial loadings without cycle counting

A Hybrid Framework for Characterizing and Benchmarking Fatigue S‐N Curves in Aluminum Alloys by Integrating Empirical and Data‐Driven Approaches

A novel evaluation method for high cycle and very high cycle fatigue strength