Abstract:Interface engineering has become a critical process to fabricate efficient and stable planar heterojunction perovskite solar cells (PSCs), as the degradation of perovskite, hysteresis, and photo and thermal instability can all be triggered by the defective interfaces of PSCs. Herein, two fullerene derivatives, NMPPF and NMTTF, have been designed as interlayers between the MAPbI3 and TiO2 electron transport layer. The thiophene terminals of NMTTF have been found to effectively passivate the uncoordinated Pb2+ of perovskite, reducing trap density and charge recombination of PSCs as well as facilitating charge transport at the perovskite and TiO2 interface. Compared to the reference MAPbI3 PSC with a maximum power conversion efficiency (PCEmax) of 18.7% and serious hysteresis (ΔPCE = 7.2%), PSCs incorporating NMTTF achieve a PCEmax of 19.5% with minor hysteresis (ΔPCE = 1.2%) and outperform the performance of NMPPF (PCEmax = 18.0%, ΔPCE = 2.3%) and PC61BM (PCEmax = 18.9%, ΔPCE = 1.4%) modified PSCs. Unencapsulated PSCs adopting these NMPPF and NMTTF interlayers also exhibit good storage stability, maintaining 80% of their initial PCEs after storing in ambient for 30 days. This work demonstrates that the thiophene moiety can be an efficient defect passivation unit to design new fullerene molecules for interfacial engineering of PSCs with high efficiency and stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01491?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01491</a>.Synthesis of NMPPF/NMTTF fullerene molecules, PL and UV–vis spectra, dark J–V curves to calculate mobility and conductivity, EQE of PSCs without and with an NMPPF or NMTTF interlayer, water contact angle measurements, PCE evolution of unencapsulated PSCs in ambient condition, and Nyquist plots of PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01491/suppl_file/ae0c01491_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Reducing Interfacial Recombination in Inverted Perovskite Solar Cells With Selenophene‐Substituted PCBM: Comparison With Thiophene and Furan Substitution

Reducing Energy Disorder in Perovskite Solar Cells by Chelation

Zn0.8Cd0.2S@PCBM Hybrid As an Efficient Electron Transport Layer for Air‐Processed P‐i‐n Planar Perovskite Solar Cells: Improvement of Interfacial Electron Transfer and Device Stability

Efficient Inverted Perovskite Photovoltaics Through Surface State Manipulation

Efficient and stable inverted perovskite solar cells enabled by homogenized PCBM with enhanced electron transport

Engineering of perovskite/electron-transporting layer interface with transition metal chalcogenides for improving the performance of inverted perovskite solar cells

Efficient and stable inverted perovskite solar cells enabled by inhibition of self-aggregation of fullerene electron-transporting compounds

Unfused Electronic Acceptor-Based Polymers as Interfacial Materials for Efficient Inverted Perovskite Solar Cells

Cross‐Linkable Fullerene Electron Transport Layer with Internal Encapsulation Capability for Efficient and Stable Inverted Perovskite Solar Cells

A Multilayered Electron Extracting System for Efficient Perovskite Solar Cells

Enhanced Interfacial Electron Transfer of Inverted Perovskite Solar Cells by Introduction of CoSe into the Electron-Transporting-layer

Unravelling the Origin of the Photocarrier Dynamics of Fullerene-Derivative Passivation of SnO2 Electron Transporters in Perovskite Solar Cells

Elucidating the Roles of TiCl4 and PCBM Fullerene Treatment on TiO2 Electron Transporting Layer for Highly Efficient Planar Perovskite Solar Cells

Improving efficiency of polymer hole transport layer based perovskite solar cells via interfacial modification

Improving the Performance of Low-Temperature Planar Perovskite Solar Cells by Adding Functional Fullerene End-Capped Polyethylene Glycol Derivatives

Lowering the dielectric mismatch for efficient inverted perovskite solar cells through incorporating cyano-functionalized fullerene additive

Thiophene Terminated Fullerene Derivatives for Interfacial Modification toward High Efficiency MAPbI 3 Perovskite Solar Cells

Designing a Perylene Diimide/Fullerene Hybrid As Effective Electron Transporting Material in Inverted Perovskite Solar Cells with Enhanced Efficiency and Stability

Non-Fullerene Small Molecule Electron-Transporting Materials for Efficient p-i-n Perovskite Solar Cells

Efficient and highly light stable planar perovskite solar cells with graphene quantum dots doped PCBM electron transport layer

Enhanced Indoor Perovskite Solar Cells: Mitigating Interface Defects and Charge Transport Losses with Polyarene‐Based Hole‐Selective Layers