Abstract:Detecting the magnetic field of the electrical equipment is crucial. To achieve high-sensitivity detection of magnetic fields, this paper presents an innovative high-sensitivity magnetic field sensor that utilizes an all-fiber Mach–Zehnder (MZ) interferometer constructed from standard single-mode fibers (SMFs). The core of the interferometer comprises two concatenated tapered optical fibers immersed in magnetic fluid (MF). The sensor operates on the principle that the refractive index (RI) of the MF varies with changes in magnetic flux density. This variation in the RI causes a shift in the attenuation peak wavelength of the interference observed in the transmission spectrum. To analyze light propagation within this dual-tapered fiber MZ interferometer, numerical simulations were conducted using the beam propagation method (BPM). These simulations were critical in predicting the sensor's performance and optimizing its design. Following the simulations, a series of experiments were performed to evaluate the sensor's response to different magnetic flux densities. The experimental results demonstrated a high sensitivity of 0.095 nm/mT within a magnetic flux density range of 0–20 mT. This level of sensitivity, coupled with the low cost and simplicity of the all-fiber construction, makes the proposed sensor highly suitable for practical applications, particularly in the monitoring of electric equipment. Its ability to provide precise and real-time measurements of magnetic fields can significantly enhance the reliability and safety of electrical systems. The research findings suggest that this sensor could be a valuable tool in various industrial and technological fields, where accurate magnetic field detection is crucial.

Dual-tapered fiber Mach–Zehnder interferometric magnetic field sensor based on magnetic fluid

High Sensitivity Magnetic Field Sensor Based on a Mach-Zehnder Interferometer and Magnetic Fluid

An Optical Fiber Magnetic Field Sensor Based on Mach–Zehnder Interferometer Composed of Two Peanut-Shaped Structures and Tapered No-Core Fiber

High Sensitivity and Low Temperature Cross-Talk Magnetic Field Sensor with Ferrofluid-Filled In-Fiber Mach-Zehnder Interferometer

Magnetic-Field Sensor Based on Core-Offset Tapered Optical Fiber and Magnetic Fluid

High sensitivity and large measurement range magnetic field micro-nano fiber sensor based on Mach-Zehnder interference

Highly Sensitive Vector Magnetic Field Sensors Based on Fiber Mach–Zehnder Interferometers

Highly Sensitive Magnetic Field Measurement With Taper-Based In-Line Mach-Zehnder Interferometer and Vernier Effect

Compact Magnetic Field Sensor Based on a Magnetic-Fluid-Integrated Fiber Interferometer

Microfiber magnetic field sensor with enhanced sensitivity and resolution

Magnetic Field Sensor Based on Twisted Fiber and Magnetic Fluid

A MMF-TSMF-MMF Structure Coated Magnetic Fluid for Magnetic Field Measurement

In-Line Michelson Interferometer Based on Optical Fiber Microspherical Structure for Magnetic Field Application

Low-temperature Cross-Talk Magnetic-Field Sensor Based on Tapered All-Solid Waveguide-Array Fiber and Magnetic Fluids.

Magnetic Field Sensor Based on Asymmetric Optical Fiber Taper and Magnetic Fluid

Highly sensitive magnetic field sensors based on Fe2O3 nanorods grown on the surface of a tapered few mode fiber

Magnetic-Field Measurement Based on Multicore Fiber Taper and Magnetic Fluid

All Fiber Magnetic Field Sensor with Ferrofluid-filled Tapered Microstructured Optical Fiber Interferometer.

A dual-wavelength demodulation-based sensor for magnetic fields

Ultra-Sensitive Magnetic Field Sensor with Resolved Temperature Cross-Sensitivity Employing Microfiber-Assisted Modal Interferometer Integrated with Magnetic Fluids

Low Temperature Sensitive Intensity-Interrogated Magnetic Field Sensor Based On Modal Interference In Thin-Core Fiber And Magnetic Fluid