Towards Smart Flexible Batteries
Elazar Cohen,Heftsi Ragones,Adi Vinegrad,David Stark,Gilat Ardel,Yossi Kamir,Moti Marcos Dorfman,Diana Golodnitsky
DOI: https://doi.org/10.1149/ma2021-02190mtgabs
2021-10-19
ECS Meeting Abstracts
Abstract:The focus on shifting towards miniaturized products coupled with the booming demand for consumer electronics are some of the key-driving factors behind the flexible-battery market. In the development of innovative power sources, freeing from design limitation along with the synthesis of reliable electrochemical materials with well-tuned features, is considered to be the most important scientific prerequisite. Two approaches for the fabrication of flexible free form-factor batteries, developed in our group will be presented. The first one is a unique, single-step method for the preparation of a membrane-electrode assembly [1]. Concurrent electrophoretic deposition (EPD) of positive and negative battery electrodes (LFP and LTO) on opposite sides of a commercial nanoporous membrane (Celgard 2325) results in the formation of a three-layer-battery structure. The cell comprising this electrophoretically deposited structure ran for more than 150 cycles with 125-140mAh/g capacity, which approaches the theoretical value of lithium iron phosphate. The electrodes can be deposited either cathodically or anodically by replacing the interchangeable charging agents, like polyethyleneimine and polyacrylic acid. These polyelectrolytes, when adsorbed on the particles of the active material, serve also as the binders. The simultaneous EPD, which we developed, can be used for the simple and low-cost manufacturing of a variety of cathode and anode materials on nanoporous polymer- and ceramic ion-conducting membranes for energy storage devices. The second approach utilizes printing techniques. These technologies are still at an early stage, and most currently-printed batteries exploit printed electrodes sandwiching self‐standing commercial polymer membranes, produced by conventional extrusion or papermaking techniques, followed by soaking in non-aqueous liquid electrolytes. We suggest a novel flexible-battery designs and report the initial results of development and characterization of novel 3D printed all-solid-state electrolytes prepared by fused-filament fabrication (FFF) [2, 3]. The electrolytes are composed of LiTFSI, polyethylene oxide (PEO), which is a known lithium-ion conductor, and polylactic acid (PLA) for enhanced mechanical properties and high-temperature durability. The flexible all-solid LiTFSI-based electrolyte exhibited bulk ionic conductivity of 3×10−5 S/cm at 90oC and 156 ohm/cm2 resistance of the solid electrolyte interphase (SEI). These results pave the way for a fully printed solid battery, which enables free-form-factor flexible geometries. References: Elazar Cohen, Moran Lifshitz, Alexander Gladkikh, Yossi Kamir, Ido Ben-Barak and Diana Golodnitsky, Novel one-step electrophoretic deposition of membrane-electrode assembly for flexible-batteries application Mater. Chem. A, 2020,8, 11391-11398Heftsi Ragones, Svetlana Menkin, Yosi Kamir, Alex Gladkikh, Tzach Mukra, Gabor Kosa and Diana Golodnitsky Towards Smart Free Form-Factor 3D Printable Battery, Sustainable Energy & Fuels, 2018, 2, 1542Heftsi Ragones, Adi Vinegrad, Gilat Ardel, Meital Goor, Yossi Kamir, Moty Marcos Dorfman, Alexander Gladkikh, and Diana Golodnitsky, On the Road to a Multi-Coaxial-Cable Battery: Development of a Novel 3D-Printed Composite Solid Electrolyte, Journal of The Electrochemical Society, 2020 167 070503 Elazar Cohen, Moran Lifshitz, Alexander Gladkikh, Yossi Kamir, Ido Ben-Barak and Diana Golodnitsky, Novel one-step electrophoretic deposition of membrane-electrode assembly for flexible-batteries application Mater. Chem. A, 2020,8, 11391-11398 Heftsi Ragones, Svetlana Menkin, Yosi Kamir, Alex Gladkikh, Tzach Mukra, Gabor Kosa and Diana Golodnitsky Towards Smart Free Form-Factor 3D Printable Battery, Sustainable Energy & Fuels, 2018, 2, 1542 Heftsi Ragones, Adi Vinegrad, Gilat Ardel, Meital Goor, Yossi Kamir, Moty Marcos Dorfman, Alexander Gladkikh, and Diana Golodnitsky, On the Road to a Multi-Coaxial-Cable Battery: Development of a Novel 3D-Printed Composite Solid Electrolyte, Journal of The Electrochemical Society, 2020 167 070503