Abstract:Remote-sensing imaging is a complicated process. It is influenced by many factors like optical distortion, sensor attitude change, satellite platform movement, curvature change of the earth, terrain fluctuation, and so on, which cause geometric distortion such as excursion, extension, and shrink compared with location of real ground objects, and the extent of distortion turns severe with the increase of distance between pixel and sub-satellite point. Therefore in practical application, correcting geometric distortion caused by terrain fluctuation or satellite platform, becomes one of the basic works. We analyzed data organizing mode and metadata structure of GF-1 satellite image data, and on that basis RPC (rational polynomial coefficient) model-based forward and inverse transformation was combined with the DEM (digital elevation model) data extraction; the process of RPC model-based images orthorectification was elaborately calculated; automatic orthorectification system (GF1AMORS) were designed and implemented, which could fit 2, 8 and 16 m resolution images. There are the critical questions: 1) Method for DEM data rapid extraction; 2) Strategy for image blocking. Firstly, DEM data were reorganized and coded based on 0.5°×0.5° geographic grid system in order that DEM data could be read to system memory rapidly according to coordinate range of image being rectified, and relevant test showed that our grid-based DEM data dynamical extraction method could achieve good efficiency with different image range, while the system memory might overflow when the image range turned larger than 3.5°×3.5°. Secondly, comparative experiments were done to study the relation between image block size and orthographic correction efficiency of GF-1 WFV (wide field of view, 16 m resolution) multi-spectral images. Experiments showed that the computational efficiency of single image converged to 98 s when the block size was set as from 384×384 to 480×480. To test the conversion accuracy of our automatic orthorectification process, 20 GF-1 PMS (Pansharpen/Multispectral Sensor, 8 m resolution) multi-spectral images that covered area with different terrain features (mountainous and plain terrain) in Heilongjiang Province with less cloud were extracted, and on that basis 400 control points were selected and compared to their homonymy points selected in Google Earth (by ENVI "SPEAR Google Earth Bridge") to analyze error and convergence. The experiment showed that our automatic orthorectification process exhibited a nice accuracy and stability in both mountainous terrain and plain terrain: For mountainous terrain, the maximum error inXorientation was less than 16.863 m and inY orientation was less than 16.811 m, and the standard deviation inX orientation was less than 5.514 m while that inY orientation was between 2.872 and 4.336 m; for plain terrain, the maximum error inX orientation was less than 10.959 m and in Y orientation was less than 13.546 m, and the standard deviation inX orientation was less than 3.051 m while that inY orientation was less than 3.761 m. The maximum distance error was 23 m, and the distance error of 92.25% control points was less than 16 m (namely 2 pixels), and that of 38.75% control points was less than 8 m (namely 1 pixel). At last, we presented the limitation and our future work about our automatic orthorectification method. Considering that there is no physical significance for each parameter of RPC model, the calibration precision of our system needs to be improved (e.g. by integrating control points to weaken the system error) before it is used in some applications with higher accuracy requirement; furthermore, there is still a large optimization space of computational efficiency for our system, and high performance computing method (e.g. graphics processing unit) will be integrated based on data block feature to improve the calculating speed.

Concatenating wide-parallax satellite orthoimages for simplified regional mapping via utilizing line-point consistency

A stable block adjustment method without ground control points using bound constrained optimization

An Error-Based Block Adjustment Method For Multi-Angle Satellite Imagery Without Ground Control Points

Planar Block Adjustment for China’s Land Regions with LuoJia1-01 Nighttime Light Imagery

Optimal selection of virtual control points with planar constraints for large‐scale block adjustment of satellite imagery

Large-Scale Orthorectification of GF-3 SAR Images Without Ground Control Points for China’s Land Area

Multi-View Large-Scale Bundle Adjustment Method for High-Resolution Satellite Images

A Novel DEM Block Adjustment Method for Spaceborne InSAR Using Constraint Slices

Block Adjustment Without GCPs for Chinese Spaceborne SAR GF-3 Imagery.

An Ortho-Rectification Algorithm Based on Collinearity Equation and Polynomial Error Modification for Remote Sensing Imagery

Resolution-Normalizing Image Stitching for Long-Linear-Array and Wide-Swath Whiskbroom Payloads

Near-Real-Time Long-Strip Geometric Processing without GCPs for Agile Push-Frame Imaging of LuoJia3-01 Satellite

Stitching and Geometric Modeling Approach Based on Multi-Slice Satellite Images

Block Adjustment of Large-scale Domestic Optical Satellite Remote Sensing Imagery without GCP in Antarctic

Application of Satellite Images with High Accuracy Attitude and Orbit Parameter in DOM Production for 1∶50 000 Database Updating Project

GPU-Accelerated PCG Method for the Block Adjustment of Large-Scale High-Resolution Optical Satellite Imagery Without GCPs

SatellStitch: Satellite Imagery-Assisted UAV Image Seamless Stitching for Emergency Response without GCP and GNSS

RFM-Based Block Adjustment for Spaceborne Images with Weak Convergent Geometry

Pre-Processing of Inner CCD Image Stitching of the SDGSAT-1 Satellite

Block Adjustment of Orientation Parameters and Interferometric Parameters Using Very High-Resolution SAR Data for DSM Mapping

Design and implementation of automatic orthorectification system based on GF-1 big data