Lighting control method based on RIIL to reduce building energy consumption

Se-Hyun Lee,Seung-Taek Oh,Jae-Hyun Lim
DOI: https://doi.org/10.1016/j.egyr.2024.01.075
IF: 5.2
2024-02-04
Energy Reports
Abstract:With the increase in the size of buildings and the dependence on artificial lighting, the consumption of lighting energy is rapidly increasing. To solve this, technologies to save energy using natural light and control of lighting on/off and dimming have been attempted. Moreover, smart lighting, which involves simulations considering factors affecting the lighting environment and the use of presence detection and sensor technologies, has been studied. However, in indoor environments created by natural and artificial lighting, changes in illuminance frequently occur. In these cases, conventional uniform lighting and limited dimming control technologies have not realized the minimization of energy consumption. This paper proposes a lighting control method based on RILL (Ratio of Illuminance Influence of individual Lighting) that can realize the reduction of lighting energy within buildings. RIIL refers to the individual lighting's contribution to illuminance at various points inside a room. By primarily controlling the lighting with the highest or lowest RILL values affecting the illuminance of a particular point, the consumption of lighting energy was minimized. In performance evaluation experiments for both single and multiple points, energy consumption was minimized while maintaining a uniformity of 0.3 or higher, with a 39% increase and a 51% decrease in energy use, respectively, when increasing or decreasing the illuminance by 200 lux from a standard illuminance of 500 lux.
energy & fuels
What problem does this paper attempt to address?