Abstract:In this paper, an elastic metamaterial beam with a novel two-degree-of-freedom local resonator is investigated theoretically, and the dispersion relation is calculated by using transfer matrix (TM). In order to confirm the existence of band gaps, the transmission spectrum of flexural wave are also studied by using finite element method. The formation mechanism of the flexural vibration bandgaps (FVBGs) are further analyzed by studying the displacement fields of the eigenmodes at the band-gap edges. At last, the evolution of the dispersion relations with the increasing of the distance from the one side rubber to the center of the local resonance mass are discussed in detail, and the effects of the outside diameter of the Cu ring and the equivalent stiffness k of the rubbers on the FVBGs are also investigated. Through the above analysis, we can draw the following conclusions, due to the unequal of the torques provided by the two rubbers, two different rotational vibrations of local resonance mass with two different local resonance frequencies are introduced in the local resonance system, thus the elastic metamaterial beam shows two FVBGs at low frequencies. The theoretical results are in good agreement with the numerical results. The magnitude of torques introduced in the local resonance system can obviously affect the locations of the FVBGs. With the asymmetry decreasing, the frequency region of the first FVBG moves to the higher value, while that of the second FVBG tends to the lower value, and when the two torques are equal, the two FVBGs coupled into one wider gap. For the elastic metamaterial beam with heavy resonance mass and weak rubbers is appropriate to obtain a lower band gap, and the total width of the FVBGs becomes wider. However, it does just the opposite under the condition of the case with light Cu ring and strong rubbers, but the total width of the band gaps also becomes wider. The propagation properties of the flexural wave in the designed local resonance beam can potentially be used to control and insulate vibration at low-frequency range and the unequal distances between the two rubbers to the center of the local resonance mass provide possibilities to expand the application of the beams for the vibration control in the needed frequency ranges.

Band gap enhancement and vibration reduction of functionally graded sandwich metastructure beam

Locally Resonant Band Gaps in Flexural Vibrations of A Timoshenko Beam with Periodically Attached Multioscillators

Low-frequency Multi-Mode Vibration Suppression of a Metastructure Beam with Two-Stage High-Static-low-dynamic Stiffness Oscillators

Metamaterial beam with graded local resonators for broadband vibration suppression

Bandgap Control of Local Resonance Sandwich Meta-Plate with Cantilevered Archimedean Spiral Beam-Mass Resonators

Novel hybrid-controlled graded metamaterial beam for bandgap tuning and wave attenuation

Flexural Vibration Bandgaps in Local Resonance Beam with A Novel Two-Degree-Of-Freedom Local Resonance System

Actively tuning of transverse wave band gaps in hybrid sandwich beam metamaterials with shunted piezoelectric array and inertial amplification mechanism

Graded metamaterial with broadband active controllability for low-frequency vibration suppression

Tuning Bandgaps in Metastructured Beams: Numerical and Experimental Study

Bandgaps and vibration isolation of local resonance sandwich-like plate with simply supported overhanging beam

Bandgap analysis of partial-interaction composite beams periodically attached vibration absorbers

Multiscale modeling and design of lattice truss core sandwich metastructures for broadband low-frequency vibration reduction

Closed-form bandgap design formulas for beam-type metastructures

Analytical and experimental study of a metamaterial beam with grading piezoelectric transducers for vibration attenuation band widening

Modeling of Sandwich MRE Resonator and Band Gap Adjustment of Metamaterial Beam

Actively Controllable Flexural Wave Band Gaps in Beam-Type Acoustic Metamaterials with Shunted Piezoelectric Patches

Low-frequency bandgap and vibration mitigation performance of metamaterial-tailored concrete-filled steel tube columns

Investigation of a Novel MRE Metamaterial Sandwich Beam with Real-Time Tunable Band Gap Characteristics

Broadband Low-Frequency Vibration Attenuation in 3D Printed Composite Meta-Lattice Sandwich Structures

Design of Kagome Lattice Composite Sandwich Metastructures with High Load Bearing and Low Frequency Vibration Reduction Properties