Abstract:In the context of CO 2 valorisation, the reverse water–gas shift reaction (RWGS) is gathering momentum since it represents a direct route for CO 2 reduction to CO. The endothermic nature of the reaction posses a challenge when it comes to process energy demand making necessary the design of effective low-temperature RWGS catalysts. Herein, multicomponent Cs-promoted Cu, Ni and Pt catalysts supported on TiO 2 have been studied in the low-temperature RWGS. Cs resulted an efficient promoter affecting the redox properties of the different catalysts and favouring a strong metal-support interaction effect thus modulating the catalytic behaviour of the different systems. Positive impact of Cs is shown over the different catalysts and overall, it greatly benefits CO selectivity. For instance, Cs incorporation over Ni/TiO 2 catalysts increased CO selectivity from 0 to almost 50%. Pt-based catalysts present the best activity/selectivity balance although CuCs/TiO 2 catalyst present comparable catalytic activity to Pt-studied systems reaching commendable activity and CO selectivity levels, being an economically appealing alternative for this process.

What problem does this paper attempt to address?

The key problem that this paper attempts to solve is the efficient conversion of carbon dioxide (CO2) to carbon monoxide (CO) through the reverse water - gas shift reaction (RWGS) under low - temperature conditions. Specifically, the research aims to design and evaluate highly efficient low - temperature RWGS catalysts to meet the energy - demand challenges brought by the endothermic nature of the reaction. In addition, the study also explores the role of cesium (Cs) as a promoter in multi - component catalysts, especially its impact on the performance of copper (Cu), nickel (Ni) and platinum (Pt) - based catalysts. ### 1. Research Background and Objectives - **Importance of CO2 Conversion**: As CO2 levels continue to rise, CO2 is regarded as one of the most important greenhouse gases. Carbon capture and utilization (CCU) technologies have become an effective way to reduce CO2 concentration and realize its value. - **Advantages of RWGS Reaction**: The RWGS reaction (CO2 + H2 → CO + H2O) is an effective method for directly reducing CO2 to CO, and is especially suitable for the production of syngas. Compared with other CO2 hydrogenation reactions, RWGS has a higher CO2 conversion rate and lower H2 consumption. - **Challenges of Low - Temperature RWGS**: Since the RWGS reaction is endothermic, it usually requires high temperatures to be carried out effectively. However, high temperatures not only increase energy requirements but also trigger other competitive side reactions (such as the Sabatier reaction and CO methanation reaction), and these side reactions are more favorable at low temperatures. Therefore, it is crucial to develop low - temperature - effective RWGS catalysts. ### 2. Research Methods and Contents - **Catalyst Design**: The study used multi - component catalysts supported on TiO2, including Cs - promoted Cu, Ni and Pt - based catalysts. As a promoter, Cs can affect the redox properties of the catalyst and enhance the metal - support interaction, thereby regulating the catalytic behavior. - **Experiments and Characterizations**: - **XRD Analysis**: Used to determine the crystal structure of the catalyst. - **HR - TEM**: Used to observe the particle size and morphology of the active phase. - **TPR Analysis**: Used to study the redox behavior of the catalyst. - **XPS Analysis**: Used to characterize the chemical state of the catalyst surface. - **Catalytic Performance Testing**: The RWGS reaction was carried out at temperatures of 300°C, 400°C and 500°C, and the CO2 conversion rate, CO selectivity and CH4 selectivity of different catalysts were evaluated. ### 3. Main Findings - **Role of Cs**: The addition of Cs significantly improved the selectivity and activity of Cu - and Ni - based catalysts. For example, Cs doping increased the CO selectivity of the Ni/TiO2 catalyst from 0% to nearly 50% and inhibited the formation of methane. - **Performance of Cu - Based Catalysts**: Although the undoped Cu catalyst had low activity, the Cs - doped CuCs/TiO2 catalyst showed catalytic activity and CO selectivity comparable to that of Pt - based catalysts, becoming an economically viable alternative. - **Superiority of Pt - Based Catalysts**: Pt - based catalysts achieved the best balance between activity and selectivity, but were less economical than Cu - based catalysts. ### Conclusion This study successfully improved the performance of Cu - and Ni - based catalysts in the low - temperature RWGS reaction by introducing Cs as a promoter, especially making significant progress in CO selectivity. This provides new ideas for the development of low - cost and highly efficient CO2 conversion catalysts and helps promote the industrial decarbonization process.

CO2 Conversion via Low-Temperature RWGS Enabled by Multicomponent Catalysts: Could Transition Metals Outperform Pt?

Single Atomic Pt on SrTiO3 Catalyst in Reverse Water Gas Shift Reactions

Catalytic Reduction of CO2 to CO via Reverse Water Gas Shift Reaction: Recent Advances in the Design of Active and Selective Supported Metal Catalysts

Single-Atom Platinum Catalyst for Efficient CO2 Conversion via Reverse Water Gas Shift Reaction

Subnanometric Pt clusters dispersed over Cs-doped TiO 2 for CO 2 upgrading via low-temperature RWGS: operando mechanistic insights to guide an optimal catalyst design

Conversion of CO2 to added value products via rWGS using Fe-promoted catalysts: Carbide, metallic Fe or a mixture?

Identification of Relevant Active Sites and A Mechanism Study for Reverse Water Gas Shift Reaction over Pt/Ceo2 Catalysts

Efficient Reduction of CO2 to CO Using Cobalt-Cobalt Oxide Core-Shell Catalysts

Ru-Catalyzed Reverse Water Gas Shift Reaction with Near-Unity Selectivity and Superior Stability

Intermediate-Temperature Reverse Water-Gas Shift Under Process Relevant Conditions Catalyzed by Dispersed Alkali Carbonates

Pt‐Mo2N Catalyst Formed by Inverse Sintering for the Reverse Water‐Gas Shift Reaction

Support-Dependent Cu–In Bimetallic Catalysts for Tailoring the Activity of Reverse Water Gas Shift Reaction

Recent Advances in Supported Metal Catalysts and Oxide Catalysts for the Reverse Water-Gas Shift Reaction

Optimizing reverse water gas shift catalysis: Minimizing metal loading and enhancing performance with Pt/ZrO 2 catalysts through Rh incorporation

Reverse water gas shift reaction over a Cu/ZnO catalyst supported on regenerated spent bleaching earth (RSBE) in a slurry reactor: the effect of the Cu/Zn ratio on the catalytic activity

Recent advances in hydrogenation of CO2 to CO with heterogeneous catalysts through the Reverse Water Gas Shift Reaction

Design of Cu/MoOx for CO2 Reduction via Reverse Water Gas Shift Reaction

Advanced Catalysts for the Water Gas Shift Reaction

High efficient CuCeO2‐δ/SiO2 catalyst for RWGS reaction: impact of Ce content and loading sequence

Synergism of Ultrasmall Pt Clusters and Basic La2O2CO3 Supports Boosts the Reverse Water Gas Reaction Efficiency

Recent progress in syngas production via catalytic CO2 hydrogenation reaction