Abstract:Deep borehole heat exchanger (DBHE) is attracting attention intensively owing to much more geothermal extraction, higher efficiency for heat pumps, and lesser land demand compared with shallow borehole heat exchanger. DBHE is usually dipped into several thousand meters in the subsurface, having a complicated heat transfer with surrounding rock–soil. However, the heat transfer characteristics below surface under different conditions are rarely studied. In this study, a numerical model considering the comprehensive effects of geothermal gradients and heat loss from inner pipe was proposed. The model was validated with experimental data and Beier analytical solution. Based on the model, the effects of primary design parameters on the heat transfer performance below surface along the pipe were investigated. The results indicate that temperature at pipe bottom increases with inlet flow rate decreasing, while the heat load cannot be extracted fully to the surface because of the heat loss of inner pipe. When the inlet flow rates decrease from 41.39 to 4.52 m3/h, the heat loss ratio increases from 25.5% to 63.7%. It is an effective way of insulating inner pipe to reduce heat loss under low inlet flow rates. Increasing the velocity in inner pipe by lessening the inner pipe diameter can also decline the heat loss well. While by this way, the increasing pumping power resulting from the higher velocity in inner pipe has to be considered. This study is significant to effective optimization of DBHE and energy conservation of buildings. A new deep borehole heat exchanger (DBHE) numerical model with logarithmic discretization in radial direction was proposed, which can account the small distances between the DBHE and the surrounding rock–soil. The developed model considers the comprehensive effects of geothermal gradients and heat loss from inner pipe. The heat transfer along the pipe can be reflected by the temperature profiles and the specific heat load distributions, which is solved on the basis of the finite volume method.

Influencing law of key parameters on the thermal efficiency of single-well closed-loop heat exchanger

Multi-factor Optimization of Thermo-Economic Performance of Coaxial Borehole Heat Exchanger Geothermal System Based on Levelized Cost of Energy Analysis

Numerical study on the effects of design parameters on the heat transfer performance of coaxial deep borehole heat exchanger

Investigation of the Heat Transfer Performance of Multi-Borehole Double-Pipe Heat Exchangers in Medium-Shallow Strata

Influence of Specific Heat Capacity Variation with Temperature and Other Important Parameters on the Thermal Reservoir Performance in the Geothermal Doublet System

Heat extraction study of a novel hydrothermal open-loop geothermal system in a multi-lateral horizontal well

Analytical model of heat transfer of U-shaped borehole heat exchanger under convolution theory and its optimal heat extraction analysis

Heat extraction analysis of a novel multilateral-well coaxial closed-loop geothermal system

Numerical study on the heat performance of enhanced coaxial borehole heat exchanger and double U borehole heat exchanger

Study on long-term performance sustainability of medium deep borehole heat exchanger based on simplified one-dimensional well model

An Efficient Model for Predicting Heat Extraction from a Multiple-Well Enhanced Geothermal System in the Presence of Areal Flow

An improved thermal model for predicting wellbore temperature distribution in deep-water gas well

An Approximate Solution for Predicting the Heat Extraction and Preventing Heat Loss from A Closed-Loop Geothermal Reservoir

Heat extraction performance analysis of a multilateral wells exploitation system with super-long gravity heat pipe

INFLUENCE OF WELL PAIR DISTANCE ON THE CHANGES OF GEO-TEMPERATURE FIELD DUE TO AQUIFER ENERGY EXTRACTION

Influencing factors analysis for the long-term thermal performance of medium and deep U-type borehole heat exchanger system

Experimental and numerical investigation of the influence of groundwater flow on the borehole heat exchanger performance: A case study from Tangshan, China

Evaluation of the Long-Term Performance of the Deep U-type Borehole Heat Exchanger on Different Geological Parameters Using the Taguchi Method

Comparative thermo-economic analysis of co-axial closed-loop geothermal systems using CO 2 and water as working fluids

Heat extraction performance evaluation of U-shaped well geothermal production system under different well-layout parameters and engineering schemes

Thermal behavior prediction and adaptation analysis of a reelwell drilling method for closed-loop geothermal system