Flash Flood Simulation for Hilly Reservoirs Considering Upstream Reservoirs—A Case Study of Moushan Reservoir

Huaqing Zhao,Hao Wang,Yuxuan Zhang,Ranhang Zhao,Zhen Qi,Haodong Zhang

DOI: https://doi.org/10.3390/su16125001

IF: 3.9

2024-06-13

Sustainability

Abstract:With the advancement of society and the impact of various factors such as climate change, surface conditions, and human activities, there has been a significant increase in the frequency of extreme rainfall events, leading to substantial losses from flood disasters. The presence of numerous small and medium-sized water conservancy projects in the basin plays a crucial role in influencing runoff production and rainwater confluence. However, due to the lack of extensive historical hydrological data for simulation purposes, it is challenging to accurately predict floods in the basin. Therefore, there is a growing emphasis on flood simulation and forecasting that takes into account the influence of upstream water projects. Moushan Reservoir basin is located in a hilly area of an arid and semi-arid region in the north of China. Flooding has the characteristics of sudden strong, short confluence time, steep rise, and steep fall, especially floods caused by extreme weather events, which have a high frequency and a wide range of hazards, and has become one of the most threatening natural disasters to human life and property safety. There are many small and medium-sized reservoirs in this basin, which have a significant influence on the accuracy of flood prediction. Therefore, taking Moushan Reservoir as an example, this paper puts forward a flash flood simulation method for reservoirs in hilly areas, considering upstream reservoirs, which can better solve the problem of flood simulation accuracy. Using the virtual aggregation method, the 3 medium-sized reservoirs and 93 small upstream reservoirs are summarized into 7 aggregated reservoirs. Then, we construct the hydrological model combining two method sets with different runoff generation and confluence mechanisms. Finally, after model calibration and verification, the results of different methods are analyzed in terms of peak discharge error, runoff depth error, difference in peak time, and certainty coefficient. The results indicate that the flooding processes simulated by the proposed model are in line with the observed ones. The errors of flood peak and runoff depth are in the ranges of 2.3% to 15% and 0.1% to 19.6%, respectively, meeting the requirements of Class B accuracy of the "Water Forecast Code". Method set 1 demonstrates a better simulation of floods with an average flood peak error of 5.63%. All these findings illustrate that the developed model, utilizing aggregate reservoirs and dynamic parameters to reflect regulation and storage functions, can effectively capture the impact of small water conservancy projects on confluence. This approach addresses challenges in simulating floods caused by small and medium-sized reservoirs, facilitating basin-wide flood prediction.

environmental sciences,environmental studies,green & sustainable science & technology

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the accuracy of reservoir flood simulation in hilly areas while considering the influence of upstream reservoirs. Specifically, for the Moushan Reservoir Basin, a hilly reservoir in the arid and semi - arid areas in northern China, the study proposes a flood simulation method that takes into account the distribution characteristics of upstream reservoirs and their impact on runoff. Due to the fact that floods caused by rainfall events in this area are characterized by strong suddenness, short confluence time, and rapid rise and fall, and extreme weather events occur frequently, posing a serious threat to human life and property safety, a method capable of effectively predicting floods is required. In addition, there are numerous small and medium - sized reservoirs in the basin, and these reservoirs have a significant impact on the accuracy of flood prediction. By constructing a hydrological model that combines different runoff - generation and confluence mechanisms and using the virtual aggregation method to summarize multiple upstream small and medium - sized reservoirs into several aggregated reservoirs, the paper improves the accuracy of flood simulation. This not only helps to improve the accuracy of flood forecasting but also provides a basis for subsequent flood regulation.