Carbon dots/ZnO quantum dots composite-based white phosphors for white light-emitting diodes

Wenjing Li,Min Wu,Hang Jiang,Longhui Yang,Chao Liu,Xiao Gong

DOI: https://doi.org/10.1039/d1cc06180a

IF: 4.9

2022-01-01

Chemical Communications

Abstract:White phosphors based on B-CDs/ZnO QDs composites were fabricated directly by electrostatic force, which could be applied for fabrication of high-performance LEDs.

chemistry, multidisciplinary

What problem does this paper attempt to address?

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

Chang-yu Shen,Ke Li,Qiang-long Hou,Hua-jun Feng,Xin-yong Dong

DOI: https://doi.org/10.1109/lpt.2010.2046724

IF: 2.6

2010-01-01

IEEE Photonics Technology Letters

Abstract:Core/shell CdSe-ZnS quantum dots (QDs) with a peak emission wavelength of 618 nm and size of ~ 5.5 nm were synthesized by thermal deposition approach. High photoluminescence efficiency with a quantum yield of more than 48% has been achieved. Red-shift of a peak emission wavelength from 532 to 568 nm was realized by doping Gd3+ ions into the YAG : Ce3+ to substitute some Y3+ ions. To compensate the poor color rendering index (CRI) of the YAG : Ce-based white light-emitting diode (LED) due to the lack of red spectral component, CdSe-ZnS QDs were blended into YAG : Ce3+ , Gd3+ phosphors. Prominent spectral evolution has been achieved by increasing the content of QDs. White LED combining a blue LED with the blends of phosphor and QDs with a weight ratio of 1:1, has been demonstrated with an improved CRI value of 90.
High Stability Carbon Dots Phosphor and Ultra-High Color Rendering Index White Light-Emitting Diodes

Yuxian Yan,Luqiao Yin,Huazhang Guo,Liang Wang,Jianhua Zhang

DOI: https://doi.org/10.1109/jphot.2021.3139107

IF: 2.4

2022-01-01

IEEE Photonics Journal

Abstract:A new kind of carbon dots based phosphor is developed for light emitting diodes (LED) by adsorbing carbon dots to starch particles. The bonding mechanism is based on hydrogen bonding of surface functional groups of carbon dots and starch particles. Aggregation-induced quenching is avoided and the thermal stability of the carbon dots phosphor is enhanced. The carbon dots phosphor is used as color convert material for white LED devices. The white LED device fabricated has an ultra-high color rendering index of 93.9, almost pure white CIE coordinate at (0.332, 0.336) and moderate CCT at 5498 K. The photoluminescence intensity (PL) under constant temperature and alternative condition is both tested to study the thermal stability of the phosphor. The PL intensity shows no obvious change after 3 days of aging; only 4% of PL loss after 10 cycles of 25 °C /85 °C alternation. Based on its good PL properties and thermal stability, this carbon dots phosphor has great potential for white LED lighting.
Microwave-assisted in situ large scale synthesis of a carbon dots@g-C3N4 composite phosphor for white light-emitting devices

Li Meng,Elena V. Ushakova,Zhengjie Zhou,Enshan Liu,Di Li,Ding Zhou,Zhanao Tan,Songnan Qu,Andrey L. Rogach

DOI: https://doi.org/10.1039/c9qm00659a

IF: 8.6834

2020-01-01

Materials Chemistry Frontiers

Abstract:Sustainable, environment-friendly phosphors produced from cheap and readily available precursor materials using green preparation processes are in high demand for lighting applications. Herein, a composite phosphor comprising carbon dots (CDs) and graphitic carbon nitride (g-C3N4) is prepared on a large scale from citric acid and urea in water, through a green microwave assisted in situ heating method. An optimized CDs@g-C3N4 composite with a 1 wt% loading of CDs shows a strong green emission under 410 nm excitation, with a photoluminescence quantum yield of 62% in the solid state. Using this composite as a phosphor in the color conversion layer, a white light emitting diode with a power efficiency of up to 42 lm W-1 is fabricated.
White light-emitting quantum dot diodes and tuning of luminescence processes

Bozhi Liu,Ruifeng Li,Lian Hu,Huizhen Wu

DOI: https://doi.org/10.1007/s00339-014-8465-5

2014-01-01

Applied Physics A

Abstract:A novel white light-emitting diode based on a large Stokes shift (~200 nm) and using pure green light-emitting CdSeS quantum dots (QDs) with an Ag/ZnSnO/QDs/spiro-TPD/ITO structure has been fabricated in which ZnSnO and spiro-TPD are served as the electron and hole transport layer, respectively. The large Stokes shift of the CdSeS QDs excludes potentially Förster resonance energy transfer process, which allows spiro-TPD to act as both an emitter and hole transport layer. The devices exhibit a wide EL spectrum consisting of three components: blue emission from spiro-TPD, green emission from QD band–band recombination, and red emission from QD surface-state recombination. We further found that as the intensity ratios among these three components vary with bias the color of the QD light-emitting diodes is tunable. The device displays a good white light-emitting characteristic with CIE coordinates of (0.281, 0.384) at an appropriate bias.
Facile Way to Fabricate High Quality White LED with Yellow Graphene Quantum Dots

Jipeng Zhou,Chunya Li,Luqiao Yin,Liang Wang,Jianhua Zhang

DOI: https://doi.org/10.1109/icept.2018.8480513

2018-01-01

Abstract:Because of the fabulous fluorescence characteristics, semiconductor quantum dots have attracted a lot attention since the first reported. Meanwhile, the applications of quantum dots have been limited by its own toxicity. The appearance of graphene quantum dots (GQDs) breaks the awkward situation. GQDs can also realize from ultraviolet to near infrared full visible light broad band emitting. The lower cost, better biocompatibility and stability than semiconductor quantum dots make it possible to replace inorganic quantum dots for chemical sensing, biomarkers, and optoelectronic devices. In this paper, the synthesis of doped GQDs is mainly studied. The nitrogen-chlorine doped GQDs were synthesized by hydrothermal method. The as prepared GQDs were characterized by TEM, XPS, FTIR, PL and other characterization methods. In this study, by utilizing common industrialized technology to fabricate GQDs white LED could achieve large-scale production. The rendering index of as prepared white GQDs LED was 85.4. It is much higher than YAG phosphor white LED. And the chromaticity coordinates of GQDs LED located at (0.34, 0.36). The correlated color temperature of 5075K was very consistent with indoor lighting scene. That means this GQDs white LED has great application prospects in the field of high-end lighting.
White Light Emitting Diodes Based on Green Graphene Quantum Dots and Red Graphene Quantum Dots

Luqiao Yin,Doudou Zhang,Weitao Li,Yameng Hu,Liang Wang,Jianhua Zhang

DOI: https://doi.org/10.1080/15421406.2021.1971850

IF: 0.7

2022-01-01

Molecular Crystals and Liquid Crystals

Abstract:White light emitting diodes (WLEDs) have attracted the attention of numerous scholars because of its high photoelectric conversion efficiency, low energy consumption and high reliability. They are known as the new generation of lighting energy in the twenty first century. Currently, the most common WLEDs are combined by blue LED chip and ce-doped yttrium aluminum garnet (YAG: Ce3+) yellow phosphors. The advantages are simple production, low cost and high luminous efficiency. However, WLEDs made of blue LED chip and yellow phosphors lacks red spectrum and exhibits luminescence, and its color rendering index (CRI) is low, usually only 70. At the same time, quantum dots (QDs) are considered to be the most potential materials for WLEDs color conversion layers due to their wide excitation spectrum, narrow emission spectrum, adjustable band gap and high quantum yield. In this paper, we fabricated green graphene QDs (GQDs) and red GQDs, measured and analyzed their morphology, structure and photoluminescence. The green GQDs, red GQDs and yellow phosphors were used to fabricate the WLEDs. The produced WLEDs showed excellent optical performance and working performance, among which Commission International de L 'Eclairage (CIE) chromaticity coordinates are (0.3332, 0.3359), and the correlated color temperature (CCT) is 5464 K (driving current is 30 mA). Electroluminescence (EL) spectra of the device at different currents were also measured.
White light emitting diodes with a high colour rendering index of 98.3 using blue emissive carbon dots

Lu Zhou,Huiyong Wang,Hongmei Yu,Eric Amador,Jiajia Xue,Shaoyan Wang,Wei Chen

DOI: https://doi.org/10.1039/d3tc02297h

IF: 6.4

2023-11-08

Journal of Materials Chemistry C

Abstract:Fluorescent carbon dots (CDs) have become important materials for white light emitting diodes (WLEDs) due to their high stability, low cost and environmentally friendly nature. Here, blue carbon dots (B-CDs) were successfully prepared by a one-step hydrothermal method using theophylline and NaOH as raw materials. B-CDs were compounded with polyacrylamide (PAM), starch and chitosan (CTS) to make bright B-CD-based phosphors, respectively. Three different matrixes of B-CD-based phosphors were used to prepare WLEDs under UV chip excitation. The results show that the WLED prepared with the B-CDs/PAM phosphor exhibits the best performance. Compared to B-CDs, the fluorescence emission of the B-CDs/PAM phosphor is significantly enhanced and the quantum yield increases from 5.06% to 78.50% due to the inhibition of the non-radiative leap process by the matrix. The prepared WLED exhibits white light with colour coordinates of (0.3338, 0.3466), a correlated colour temperature (CCT) of 5442 K and a colour rendering index (CRI) of 98.3. Such a high CRI fully reflects the true colour of the object and has great potential for indoor lighting devices to protect the human eye and relieve eye strain.

materials science, multidisciplinary,physics, applied
Blue and green double band luminescent carbon quantum dots: Synthesis, origin of photoluminescence, and application in white light-emitting devices

Xifang Chen,Wenhui Wu,Wenxia Zhang,Ziye Wang,Zhenjin Fu,Lei Zhou,Zao Yi,Gongfa Li,Liangcai Zeng

DOI: https://doi.org/10.1063/5.0046495

IF: 4

2021-04-12

Applied Physics Letters

Abstract:Carbon quantum dots (CQDs) have become an excellent candidate for light-converting phosphors. However, it is a challenge to develop white emission CQDs and overcome the agglomeration in the process of solid-state CQDs. Here, white fluorescence CQDs with graphite core structure were synthesized by a one-step hydrothermal method from 1,3-dihydroxynaphthalene and hydrochloric acid. The photoluminescence spectra and surface structure characterization along with UV-Vis absorption spectrum, photoluminescence excitation, and time-resolved photoluminescence spectra together reveal the luminescence of CQDs stems from carbon-oxygen-related surface fluorophores. The principle of solvent similarity compatibility is an effective thought to choose isolating matrix material for the sake of overcoming the agglomeration of CQDs in the process of forming solid film. Solid-state white light emitting device (WLED) was fabricated using the CQDs embedded in polymethyl methacrylate matrix as a single white-light converter excited by a 365 nm UV-LED chip. The fabricated WLED based on CQDs is cold white light source with CIE coordinates (0.3122, 0.3429) and with CCT of 6428 K.

physics, applied
Multicolor and Single-Component White Light-Emitting Carbon Dots from a Single Precursor for Light-Emitting Diodes

Qiurui Han,Wenjun Xu,Chunyu Ji,Gaoyang Xiong,Changsheng Shi,Dongming Zhang,Wenquan Shi,Yuxiang Jiang,Zhili Peng

DOI: https://doi.org/10.1021/acsanm.2c04130

IF: 6.14

2022-10-17

ACS Applied Nano Materials

Abstract:The preparation of multicolor and white light-emitting carbon dots (CDs) is of both significant importance and challenging for their applications as white phosphors for light-emitting diodes (LEDs). In this report, a facile reaction system that is capable of preparing both multicolor and white light-emitting CDs was disclosed. In this system, three CDs emitting yellow, red, and green lights were prepared, and monochromatic LEDs were constructed using these multicolor CDs. Most importantly, single-component white light-emitting CDs with CIE coordinates of (0.33, 0.33) were also prepared. The white light-emitting CDs were applied as single-component white phosphors for the fabrication of white LEDs. The white LEDs constructed demonstrated excellent performance, emitting warm white light (CCT = 3723 K) with CIE coordinates of (0.39, 0.37) and an extremely high color-rendering index of 91.5, which should find favorable applications for indoor illumination.

materials science, multidisciplinary,nanoscience & nanotechnology
A Facile Approach to Solid-State White Emissive Carbon Dots and Their Application in UV-Excitable and Single-Component-Based White LEDs

Xiangyu Feng,Kai Jiang,Haibo Zeng,Hengwei Lin

DOI: https://doi.org/10.3390/nano9050725

2019-05-10

Abstract:Large-scale applications of conventional rare-earth phosphors in white light-emitting diodes (W-LEDs) are restricted by the non-renewable raw material sources and high energy consumption during the production process. Recently, carbon dots (CDs) have been proposed as promising alternatives to rare-earth phosphors and present bright prospects in white lighting. However, the use of CDs in W-LEDs still has two major obstacles, i.e., solid-state quenching and lack of single-component white emissive products. In this work, a facile, rapid, and scalable method for the preparation of solid-state white emissive CDs (W-CDs) is reported via microwave-irradiation heating of L-aspartic acid (AA) in the presence of ammonia. The W-CDs exhibit blue photoluminescence (PL) in dilute aqueous dispersion and their emission spectra gradually broaden (emerging new emissions at orange-yellow regions) with concentration increases. Interestingly, the W-CDs powder displays a very broad PL spectrum covering nearly the whole visible-light region under ultraviolet (UV) excitation, which is responsible for the observed white emission. Further studies revealed that the self-quenching-resistance feature of the W-CDs is probably due to a covering of polymer-like structures on their surface, thus avoiding the close contact of nanoparticles with each other. PL emission of the W-CDs is reasonably ascribed to a cross-linked enhanced effect (CEE) of the sub-fluorophores contained in the material (e.g., -NH2 and C=O). Finally, applications of the W-CDs in fabricating single-component-based W-LEDs using commercially available UV chips were attempted and shown to exhibit satisfactory performances including high white light-emitting purity, high color rendering index (CRI), and tunable correlated color temperature (CCT), thus rendering great promise for W-CDs in the field of white lighting.
Multicolor carbon dots assembled polyvinyl alcohol with enhanced emission for white light-emitting diode

Yunyan Kang,Dongna Li,Riyue Dong,Haoran Zhang,Wei Li,Xuejie Zhang,Xian Yang,Bingfu Lei

DOI: https://doi.org/10.1016/j.jlumin.2022.119164

IF: 3.6

2022-11-01

Journal of Luminescence

Abstract:Red carbon dots (R-CDs), yellow-green carbon dots (Y-CDs) and blue carbon dots (B-CDs) were successfully synthesized by one-step hydrothermal method using o-phenylenediamine and dopamine hydrochloride as raw materials by adjusting the pH of the reaction solvent. The Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) spectra and optical properties of CDs show that these three CDs have similar types but different contents of functional groups, resulting in different fluorescence emission. R-CDs and Y-CDs compound with polyvinyl alcohol (PVA) to form bright R-CDs/PVA and Y-CDs/PVA phosphors, while B-CDs/PVA phosphors have weak fluorescence. Compared with R-CDs and Y-CDs solution, the fluorescence emission of the phosphors was significantly enhanced for the matrix inhibits the process of non-radiative transition. Based on the thermostability and broad emission peaks of CD-based phosphors, light-emitting diode (LED) was fabricated using R-CDs/PVA and Y-CDs/PVA phosphors as fluorescent material. The prepared LED exhibits white light with a color coordinate of (0.32, 0.33), correlated color temperature (CCT) of 6067 K and color rendering index (CRI) of 78.2. The environmental-friendly CD-based white light-emitting diode (WLED) was successfully fabricated.

optics
Achieving 46% efficient white-light emissive carbon dot-based materials by enhancing phosphorescence for single-component white-light-emitting diodes

Qijun Li,Yuchen Li,Shuai Meng,Jian Yang,Yukun Qin,Jing Tan,Songnan Qu

DOI: https://doi.org/10.1039/d1tc01001h

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:46% efficient white-light emissive carbon dot-based materials are successfully prepared by enhancing phosphorescence emission and are applied to single-component white-light-emitting diodes.

materials science, multidisciplinary,physics, applied
One‐Step Synthesis of White‐Light‐Emitting Carbon Dots for White LEDs with a High Color Rendering Index of 97

Zishan Yan,Tong Chen,Lingpeng Yan,Xinghua Liu,Jingxia Zheng,Fu‐de Ren,Yongzhen Yang,Bin Liu,Xuguang Liu,Bingshe Xu

DOI: https://doi.org/10.1002/advs.202206386

IF: 15.1

2023-02-25

Advanced Science

Abstract:The white‐light‐emitting carbon dots are synthesized by a one‐step solvothermal method of trimellitic acid and o‐phenylenediamine, which consists of four types of carbon dots emitting blue, green, yellow, and red light. Five kinds of light‐emitting diodes can be prepared using the above carbon dots, among which the color rendering index of white light‐emitting diode is as high as 97. White‐light‐emitting carbon dots (WCDs) show innate advantages as phosphors in white light‐emitting diodes (WLEDs). For WLEDs, the color rendering index (CRI) is the most important metric to evaluate its performance. Herein, WCDs are prepared by a facile one‐step solvothermal reaction of trimellitic acid and o‐phenylenediamine. It consists of four CDs identified by column chromatography as blue, green, yellow, red, and thus white light is a superposition of these four types of light. The mixture of the four CDs undergoes Förster resonance energy transfer to induce the generation of white light. The photoluminescence of WCDs originates from the synergistic effect of carbon core and surface states. Thereinto, the carbon core states dominate in RCDs, and the increase of amide contents and degree of conjugation promote the redshift of the emission spectra, which is further confirmed by theoretical calculations. In addition, a high CRI of 97 is achieved when the WCDs are used as phosphors to fabricate WLEDs, which is almost the highest value up to now. The multicolor LEDs can also be fabricated by using the four multicolor CDs as phosphors, respectively. This work provides a novel approach to explore the rapid preparation of low‐cost, high‐performance WCDs and CDs‐based WLEDs.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Microwave‐Assisted Preparation of White Fluorescent Graphene Quantum Dots as a Novel Phosphor for Enhanced White‐Light‐Emitting Diodes

Min-Yi Zou,Guangqin Qi,Zhimin Luo,Xinwen Zhang,Lihui Yuwen,Kexin Chen,Wei Huang,Lianhui Wang

DOI: https://doi.org/10.1002/adfm.201505044

2016-04-01

Abstract:Graphene quantum dots (GQDs) with white fluorescence are synthesized by a microwave‐assisted hydrothermal method using graphite as the precursor. A solution‐processed white‐light‐emitting diode (WLED) is fabricated using the as‐prepared white fluorescent GQDs (white‐light‐emitting graphene quantum dots, WGQDs) doped 4,4‐bis(carbazol‐9‐yl)biphenyl as the emissive layer. White‐light emission is obtained from the WLED with 10 wt% doping concentration of WGQDs, which shows a luminance of 200 cd m−2 at the applied voltage of 11–14 V. Importantly, an external quantum efficiency of 0.2% is achieved, which is the highest among all the reported WLED based on GQDs or carbon dots. The results demonstrate that WGQDs as a novel phosphor may open up a new avenue to develop the environmentally friendly WLEDs for practical application in solid‐state lighting.

Engineering,Materials Science,Physics
Modulation of the photoluminescence in carbon dots through surface modification: from mechanism to white light-emitting diodes

Jinyang Zhu,He Shao,Xue Bai,Yue Zhai,Yongsheng Zhu,Xu Chen,Gencai Pan,Biao Dong,Lin Xu,Hanzhuang Zhang,Hongwei Song

DOI: https://doi.org/10.1088/1361-6528/aab9d6

IF: 3.5

2018-04-13

Nanotechnology

Abstract:Carbon dots (CDs) have emerged as a new type of fluorescent material because of their unique optical advantages, such as high photoluminescence quantum yields (QYs), excellent photo-stability, excitation-dependent emissions, and low toxicity. However, the photoluminescence mechanism for CDs remains unclear, which limits their further practical application. Here, CDs were synthesized via a solvothermal route from citric acid and urea. Through the oxidation and reduction treatment of pristine CDs, the origin of the photoluminescence and the involved mechanism were revealed. We found that the blue/green/red emissions originated from three diverse emitting states, i.e. the intrinsic state, and C=O- and C=N-related surface states, respectively. Based on the as-prepared CDs, a pH sensor depending on the radiometric luminescence detection was developed. Furthermore, we constructed CD/PVP (PVP, polyvinylpyrrolidone) composite films, which exhibited white light emission with photoluminescence QYs of 15.3%. The white light emission with different correlated color temperatures (CCTs), from 4807 K to 3319 K, was obtained by simply changing the amount of PVP solution. Benefiting from the white light-emitting solid-state films, single-component white light-emitting diodes were fabricated with an average color rendering index value (Ra) of 80.0, luminous efficiency of 10.2 lm W-1, and good working stability, thus indicating a promising potential for practical lighting applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Stable and efficient hybrid Ag-In-S/ZnS@SiO2-carbon quantum dots nanocomposites for white light-emitting diodes

Hao Lin,Jie Yang,Yong-feng Liu,Fan-ju Zeng,Xiao-Sheng Tang,Zhi-qiang Yao,Hong-ling Guan,Qian Xiong,Jia-er Zhou,Dao-fu Wu,Juan Du

DOI: https://doi.org/10.1016/j.cej.2020.124654

IF: 15.1

2020-08-01

Chemical Engineering Journal

Abstract:As a promising energy-saving technique, the eco-friendly and low-cost solid-state white light-emitting diodes (WLEDs) based on quantum dots (QDs) have been widely studied. Herein, a WLED device prepared by core–shell structure nanocomposites based on Ag-In-S/2 quantum dots (2) and carbon quantum dots (CDs) was successfully constructed. CDs were combined onto the surface of 2 QDs to synthesize Ag-In-S/2-Carbon quantum dots (AIS-CDs) nanocomposites with a white-light emission, which successfully overcome the quenching effect of CDs induced by conventional aggregation. The as-prepared AIS-CDs nanocomposites presented high stability and a photoluminescence quantum yield (PLQY) of 35%. Moreover, the corresponding AIS-CDs nanocomposites-based WLEDs demonstrated the color coordinate of (0.32, 0.33), which is comparable to the pure white light (0.33, 0.33); furthermore, the luminous efficiency of the as-prepared WLEDs showed 15.1 lm W−1. These results reported herein may open up a new avenue for the development of high-performance, low-cost, and environmentally-friendly WLEDs.

engineering, chemical, environmental
Microwave-assisted in situ large scale synthesis of a carbon dots@g-C3N4 composite phosphor for white light-emitting devices

Li Meng,Elena V. Ushakova,Zhengjie Zhou,Enshan Liu,Di Li,Ding Zhou,Zhanao Tan,Songnan Qu,Andrey L. Rogach

DOI: https://doi.org/10.1039/c9qm00659a

IF: 8.6834

2020-01-01

Materials Chemistry Frontiers

Abstract:A composite phosphor comprising carbon dots and g-C3N4 is prepared on a large scale through a green microwave assisted in situ heating method, and is used for fabrication of white LEDs with a power efficiency of up to 42 lm W−1.
Gram‐Scale Synthesis of 41% Efficient Single‐Component White‐Light‐Emissive Carbonized Polymer Dots with Hybrid Fluorescence/Phosphorescence for White Light‐Emitting Diodes

Zifei Wang,Yang Liu,Shijie Zhen,Xiaoxi Li,Weiguang Zhang,Xun Sun,Baoyuan Xu,Xue Wang,Zhenhua Gao,Xiangeng Meng

DOI: https://doi.org/10.1002/advs.201902688

IF: 15.1

2020-01-16

Advanced Science

Abstract:Fluorescent carbon dots (CDs) are compelling optical emitters to construct white light‐emitting diodes (WLEDs). However, it remains a challenge to achieve large‐scale and highly efficient single‐component white‐light‐emissive CDs suitable for WLED applications. Herein, a low cost, fast processable, environmentally friendly, and one‐step synthetic approach is developed for the preparation of gram‐scale and highly efficient single‐component white‐light‐emissive carbonized polymer dots (SW‐CPDs). It is revealed that hybrid fluorescence/phosphorescence components cooperatively contribute to the emergence of white light emission. The SW‐CPDs exhibit a record quantum yield (QY) of ≈41% for the white light emission observed in solid‐state CD systems, while the QY of the phosphorescence is ≈23% under ambient conditions. Heavy doping of N and P elements as well as presence of covalently cross‐linked polymer frameworks is suggested to account for the emergence of hybrid fluorescence/phosphorescence, which is supported by the experimental results and theoretical calculations. A WLED is fabricated by applying the SW‐CPDs on an UV‐LED chip, showing favorable white‐light‐emitting characteristics with a high luminous efficacy of 18.7 lm W−1 that is comparable to that of state‐of‐the‐art WLEDs reported before.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Enhancing White Light-Emitting Diode Performance with Ultra-Wide Spectrum ZnS:Mn-CDs@SiO2 Dual Core@Shell Composite

Yuanhui Zheng,Haijiang Qiu,Song Yang,Min Li,Haixin Chen,Yongqi Zhang,Xin Chen

DOI: https://doi.org/10.1039/d4qi01099j

IF: 7.779

2024-11-28

Inorganic Chemistry Frontiers

Abstract:Recent progress in the field of carbon dots (CDs) has highlighted their significant potential, attributed to their exceptional optical properties and diverse applications, most notably in the realm of white light-emitting diodes (WLEDs). CDs are recognized for their broad spectrum of emission, adjustable fluorescence, and excellent thermal stability, making them ideal candidates for use in WLEDs. However, the challenge lies in synthesizing CDs that can emit long-wavelength, multicolor light from a single host material. This research presents a highly efficient dual-core-shell structured white-emitting phosphor, denoted as ZnS:Mn-CDs@SiO2, which has achieved an impressive photoluminescence quantum yield (PLQY) of 25.8% and an expansive full width at half maximum (FWHM) of 131 nm. The successful implementation of this novel material has led to the creation of WLEDs with Commission Internationale de l'Eclairage (CIE) coordinates at (0.32, 0.38) and a correlated color temperature (CCT) of 5856 K, marking a significant stride in the development of high-performance WLEDs.

chemistry, inorganic & nuclear
Resistance to aggregation-caused quenching: chitosan-based solid carbon dots for white light-emitting diode and 3D printing

Jiaxin Ni,Xiaolin Huang,Yibing Bai,Bin Zhao,Youqi Han,Shiyan Han,Ting Xu,Chuanling Si,Chunlei Zhang

DOI: https://doi.org/10.1007/s42114-022-00483-6

IF: 11.806

2022-06-07

Advanced Composites and Hybrid Materials

Abstract:Solid state emission carbon dots have replaced traditional phosphors and become the most promising new-generation color conversion layer, which are used to produce low-cost, environmentally friendly, and low-energy consumption white light-emitting diode (WLED). Here, chitosan-based solid state carbon dots (C-SS-CDs) with yellow fluorescence and a yield of 90% were successfully obtained from chitosan via a one-step hydrothermal synthesis. The research results confirmed that the C-SS-CDs inherited the basic backbone structure of chitosan moieties and prevented the π-π interaction between carbon cores, thereby inhibiting the occurrence of aggregation caused quenching (ACQ) in the solid state. Meanwhile, the existence of fluorescence resonance energy transfer (FRET) facilitates long wavelength emission of C-SS-CDs in highly concentrated solution and solid state. The photoluminescence quantum yield (PLQY) of C-SS-CDs in dilute acid solution is 40%, which can be used for the detection of Fe3+ ions in acidic systems. The C-SS-CDs were mixed with epoxy resin and curing agent to obtain C-SS-CDs/epoxy resin composites, which were coated onto the 450 nm chip, thereby successfully obtaining a WLED with the color rendering index of more than 90. In addition, C-SS-CDs/epoxy composites can also obtain 3D anti-counterfeiting and warning signs by 3D printing.Graphical AbstractChitosan-based solid emission carbon dots were applied to white light-emitting diode with color rendering index over 90 and 3D printing.

nanoscience & nanotechnology,materials science, composites

Carbon dots/ZnO quantum dots composite-based white phosphors for white light-emitting diodes

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

High Stability Carbon Dots Phosphor and Ultra-High Color Rendering Index White Light-Emitting Diodes

Microwave-assisted in situ large scale synthesis of a carbon dots@g-C3N4 composite phosphor for white light-emitting devices

White light-emitting quantum dot diodes and tuning of luminescence processes

Facile Way to Fabricate High Quality White LED with Yellow Graphene Quantum Dots

White Light Emitting Diodes Based on Green Graphene Quantum Dots and Red Graphene Quantum Dots

White light emitting diodes with a high colour rendering index of 98.3 using blue emissive carbon dots

Blue and green double band luminescent carbon quantum dots: Synthesis, origin of photoluminescence, and application in white light-emitting devices

Multicolor and Single-Component White Light-Emitting Carbon Dots from a Single Precursor for Light-Emitting Diodes

A Facile Approach to Solid-State White Emissive Carbon Dots and Their Application in UV-Excitable and Single-Component-Based White LEDs

Multicolor carbon dots assembled polyvinyl alcohol with enhanced emission for white light-emitting diode

Achieving 46% efficient white-light emissive carbon dot-based materials by enhancing phosphorescence for single-component white-light-emitting diodes

One‐Step Synthesis of White‐Light‐Emitting Carbon Dots for White LEDs with a High Color Rendering Index of 97

Microwave‐Assisted Preparation of White Fluorescent Graphene Quantum Dots as a Novel Phosphor for Enhanced White‐Light‐Emitting Diodes

Modulation of the photoluminescence in carbon dots through surface modification: from mechanism to white light-emitting diodes

Stable and efficient hybrid Ag-In-S/ZnS@SiO2-carbon quantum dots nanocomposites for white light-emitting diodes

Microwave-assisted <i>in situ</i> large scale synthesis of a carbon dots@g-C<sub>3</sub>N<sub>4</sub> composite phosphor for white light-emitting devices

Gram‐Scale Synthesis of 41% Efficient Single‐Component White‐Light‐Emissive Carbonized Polymer Dots with Hybrid Fluorescence/Phosphorescence for White Light‐Emitting Diodes

Enhancing White Light-Emitting Diode Performance with Ultra-Wide Spectrum ZnS:Mn-CDs@SiO2 Dual Core@Shell Composite

Resistance to aggregation-caused quenching: chitosan-based solid carbon dots for white light-emitting diode and 3D printing