Abstract:This paper proposes an integrated model of power-to-ammonia (P2A) to exploit the inherent operational dispatchability of nitrogen-ammonia (N<sub>2</sub>-NH<sub>3</sub>) cycles for high-renewable multi-energy systems. In this model, the steady-state electrolytic processis mathematically formulated into a thermodynamic system based on thermo-electrochemical effects, and the long-term degradation process of P2A is transformed as the short-term degradation cost to characterize its cost-efficiency. Furthermore, the enhanced utilization of P2A is explored to form a renewable energy hubfor coupled multi-energy supplies, and a coupling matrix is formulated for the optimal synergies of electrical, ammonia and thermal energy carriers. An iterative solution approach is furtherdeveloped to schedule the hub-internal multi-energy conversion and storage devices for high-efficiency utilization of available hybrid solar-wind renewables. Numerical studies on a stand-alone microgrid over a 24-hour scheduling periods are presented to confirm the effectiveness and superiority of the proposed methodology over regularbattery and power-to-gas (P2G) storages on system operational economy and renewable energy accommodation.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is how to effectively use the Power - to - Ammonia (P2A) technology in a high - proportion renewable energy power system to improve the flexibility and economy of the system. Specifically, the paper proposes an integrated P2A model, aiming to utilize the inherent operation scheduling capabilities of the Nitrogen - Ammonia (N2 - NH3) cycle to serve high - renewable multi - energy systems. The following are the key points of the paper: 1. **Thermoelectrochemical Modeling of the Electrolysis Process**: The paper mathematically models the steady - state electrolysis process as a thermodynamic system based on the thermoelectrochemical effect. This helps to understand the multi - energy coupling mechanism in the P2A process and optimize the production of NH3. 2. **Short - Term Conversion of P2A Long - Term Degradation Costs**: The paper proposes a general model that incorporates P2A long - term capital costs and lifespan into the short - term degradation process. This model systematically integrates the daily operation and lifecycle degradation of the nitrogen generator and electrolyzer, providing a quantitative cost - benefit analysis for efficient coordination between batteries and P2A storage. 3. **Enhancing P2A Utilization**: The paper explores methods to enhance P2A utilization, forming a renewable energy center to analyze and utilize its multi - energy supply potential under hybrid renewable energy. This problem is further decomposed into computationally feasible sub - problems and distributedly solved using efficient off - the - shelf solvers. ### Paper Background With the global pursuit of low - carbon and clean energy systems, the installed capacity of renewable energy is expected to continue to increase. However, the intermittency and non - dispatchability of renewable energy require a great deal of operational flexibility to deal with. Traditional energy storage systems, such as batteries, although they can alleviate fluctuations, frequent charging and discharging will significantly reduce the battery's service life, thus affecting the economy and reliability of the system. As an emerging technology, P2A has the following advantages by converting excess electricity into ammonia (NH3): - **High Energy Density**: NH3 can be liquefied or transported more densely at normal temperature and pressure, which is more economical compared to other gas carriers (such as CH4 and H2). - **Large - Scale Storage**: NH3, as an excellent chemical storage medium, has a high round - trip efficiency, energy density, transportability, and a low - cost N2 source. - **Safety**: Due to the industry's extensive experience in NH3 storage safety, P2A is more suitable for energy storage. ### Main Contributions 1. **Thermoelectrochemical Model**: The paper proposes a thermodynamic model of the electrolyzer to study the multi - energy coupling mechanism between P2A and renewable energy. This model allows controlling the thermodynamic behavior of the electrolyzer under intermittent renewable energy feedback, optimizing the steady - state performance, and increasing NH3 production. 2. **Degradation Cost Model**: A general P2A degradation cost model is proposed, which incorporates long - term capital costs and lifespan into the short - term degradation process. This model integrates the daily operation and lifecycle degradation of the nitrogen generator and electrolyzer, providing a cost - benefit analysis for efficient coordination between batteries and P2A storage. 3. **Multi - Energy Utilization Framework**: A multi - energy supply framework based on P2A is proposed to analyze and utilize its multi - energy supply potential under hybrid renewable energy. This problem is decomposed into computationally feasible sub - problems and distributedly solved using efficient off - the - shelf solvers. Through these contributions, the paper aims to improve the system flexibility and economy under high renewable energy penetration, support the large - scale deployment of renewable energy, and accelerate the transformation of the energy system.

Integrated Modelling and Enhanced Utilization of Power-to-Ammonia for High Renewable Penetrated Multi-Energy Systems

Dynamic-cycle Simulation of Power-to-methanol-to-power System with Reversible Solid Oxide Cells: Multi-physics and Techno-Economic Analysis

Coordinated Energy Management Strategy for Multi-Energy Hub with Thermo-Electrochemical Effect Based Power-to-ammonia: A Multi-Agent Deep Reinforcement Learning Enabled Approach

Low Carbon Collaborative Planning of Integrated Hydrogen-Ammonia System and Power Distribution Network

Economy-environment-energy performance evaluation of power to hydrogen and power to methane considering renewable energy generation and carbon capture

Optimal Dispatch of Combined Electricity-Gas-Heat Energy Systems with Power-to-Gas Devices and Benefit Analysis of Wind Power Accommodation

Coordinated Dispatch of Multiple-Energy Carrier System with Power-to-Gas Equipment Involved

Two-stage low-carbon economic dispatch of an integrated energy system considering flexible decoupling of electricity and heat on sides of source and load

Proposal and surrogate-based cost-optimal design of an innovative green ammonia and electricity co-production system via liquid air energy storage

Optimal Sizing of Isolated Renewable Power Systems with Ammonia Synthesis: Model and Solution Approach

Optimized Scheduling of Integrated Energy Systems Accounting for Hydrogen Energy Multi-Utilization Models

Novel Optimal Dispatch Method for Multiple Energy Sources in Regional Integrated Energy Systems Considering Wind Curtailment

Conceptual design and multi-objective optimization of a hybrid system based on direct ammonia protonic ceramic fuel cell and alkali metal thermal electric converter

Optimal Operation for P2H System with 100% Renewable Energy Concerning Thermal-Electric Properties

Storage and Regeneration of Renewable Energy Via Hydrogen - A Novel Power System Integrating Electrified Methane Reforming and Gas-Steam Combined Cycle

Optimal Operation for P2H System Based on a Power–temperature–hydrogen Coupling Model for Alkaline Water Electrolyzer Plant

Multi-timescale Trading Strategy for Renewable Power to Ammonia Virtual Power Plant in the Electricity, Hydrogen, and Ammonia Markets

A multi-model method to assess the value of power-to-gas using excess renewable

Editorial for Computer Networks Special Issue on “Measurement-Based Optimization of P2P Networking and Applications”

Capacity Optimization of Hydrogen Buffer Tanks in Renewable Power to Ammonia (P2A) System

Parametric Analysis of a Modified Ammonia-Hydrogen-electricity Cogeneration System