Abstract:Hydrogen-free amorphous carbon (a-C) and carbon nitride (a-C:N) films were deposited using the pulsed cathodic arc discharge at different argon and nitrogen pressures. The surface and mechanical properties of these films were found to strongly depend on the gas pressure. The tetrahedral amorphous carbon and hard a-C:N films with smooth surfaces (rms roughness: 0.15nm) were prepared at lower gas pressures (<6×10−2Pa). Incorporation of an increasing amount of nitrogen in a-C:N films caused a decrease in film hardness. All the films were covered with the thin (0.3–2nm) graphite-like surface layers. The film hardness was correlated to the soft surface layer thickness, and the films with thinner surface layers exhibit higher hardness. The mean energies of pulsed plasma beams were measured as the functions of argon and nitrogen pressures. The mean energies of plasma beams decrease in an exponential fashion with increasing gas pressure due to the carbon ion collisions with the neutral gas species. The effects of mean energies of deposited species on the film deposition were explained in terms of the thermal spike migration of surface atoms. The formation of graphite-like surface layers is associated with the low-energy deposition process. The low-energy (<1–3eV) species diffusing on film surface lead to the formation of graphite-like a-C films with plenty of grains. The higher-energy (>10eV) species may produce the strong thermal spike at film surface, and contribute to the formation of sp3 bonded structure at a sp3 bonded matrix.

Influence of the pressure of a propane-butane mixture on the morphology of carbon nanomaterial formed in an arc discharge

Pressure Effects on Nanotubes Formation Using the Submerged Arc in Water Method

Morphology of Carbon Nanotubes Prepared by Carbon Arc

Influence of NH3 Atmosphere on the Growth and Structures of Carbon Nanotubes Synthesized by the Arc-Discharge Method

Products on Electrodes in an Argon-Methane Magnetically Rotating Arc at Atmospheric Pressure

Optimization of Carbon Nanotube Production by Arc-Discharge

Gas and Pressure Effects on the Synthesis of Amorphous Carbon Nanotubes

Carbon Nanotubes Grown on the Surface of Cathode Deposit by Arc Discharge

Generation and Deposition of Fullerene- and Nanotube-Rich Carbon Thin Films

Current and Arc Pushing Force Effects on the Synthesis of Single-Walled Carbon Nanotubes by Arc Discharge.

Preparation of Large Amounts of Carbon Nanotubes in Hydrogen Atmosphere by Arc-Discharge

Effect of Pressure on the Deposition of Hydrogen-Free Amorphous Carbon and Carbon Nitride Films by the Pulsed Cathodic Arc Discharge Method

Complex structure of the carbon arc discharge for synthesis of nanotubes

Comparison study on carbon nanomaterial synthesis from methane and acetylene in DC arc plasma

Effects of gas pressure and plasma power on the growth of carbon nanostructures

Research on the influence of arc discharge conditions on the formation of carbon Nano-materials

Morphology Of Char Particles From Coal Pyrolysis In A Pressurized Entrained Flow Reactor: Effects Of Pressure And Atmosphere

Effects of total CH4/Ar gas pressure on the structures and field electron emission properties of carbon nanomaterials grown by plasma-enhanced chemical vapor deposition

The influence of different atmosphere gases on the growth and structure of double-walled carbon nanotubes

Pressure-dependent synthesis of graphene nanoflakes using Ar/H2/CH4 non-thermal plasma based on rotating arc discharge

The Raman scattering of carbon nanotubes produced in different inert gases and their pressures by arc discharge