Abstract:The fabrication of a single polymer network that exhibits a good reversible two-way shape memory effect (2W-SME), can be formed into arbitrarily complex three-dimensional (3D) shapes, and is recyclable remains a challenge. Herein, we design and fabricate poly(thiourethane) (PTU) networks with an excellent thermadapt reversible 2W-SME, arbitrary reconfigurability, and good recyclability via the synergistic effects of multiple dynamic covalent bonds (i.e., ester, urethane, and thiourethane bonds). The PTU samples with good mechanical performance simultaneously demonstrate a maximum tensile stress of 29.7 ± 1.1 MPa and a high strain of 474.8 ± 7.5%. In addition, the fraction of reversible strain of the PTU with 20 wt % hard segment reaches 22.4% during the reversible 2W-SME, where the fraction of reversible strain is enhanced by self-nucleated crystallization of the PTU. A sample with arbitrarily complex permanent 3D shapes can be realized via the solid-state plasticity, and that sample also exhibits excellent reversible 2W-SME. A smart light-responsive actuator with a double control switch is fabricated using a reversible two-way shape memory PTU/MXene film. In addition, the PTU networks are de-cross-linked by alcohol solvolysis, enabling the recovery of monomers and the realization of recyclability. Therefore, the present study involving the design and fabrication of a PTU network for potential applications in intelligent actuators and multifunctional shape-shifting devices provides a new strategy for the development of thermadapt reversible two-way shape memory polymers.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13057.Composition of PTU networks; FTIR curves and TGA curves of PTU samples; residual content of PTU samples after being immersed in water; swelling ratios and residual content of PTU samples in different solvents; crystallinity of the PTU samples obtained from XRD data; calculation formula of cross-linking density; schematic diagram of the temperature control of self-nucleated crystallization; DSC cooling curves of PTU-20% after treating at different self-nucleation temperatures (Ts); reversible two-way shape memory parameters of PTU-20% samples; stress–strain curves of PTU-20% film; performance of PTU samples before and after reprocessing; TGA curves of the samples; temperature changes as a function of time while the NIR light is turned on and off (PDF)Movie showing that the film can reversibly switch between square and cylindrical shapes during the heating–cooling cycles (Movie S1) (MP4)Movie showing that the wings of the bird can reversibly open and close upon variation of the temperature, similar to the wing motion of a bird flying (Movie S2) (MP4)A remote-controllable actuator (Movie S3) (MP4)Movie showing sunlight instead of NIR light used to remotely control the actuator (Movie S4) (MP4)This article has not yet been cited by other publications.

Intelligent Reversible Reconfigurable Metamaterials Based on a Two-Way Shape Memory Polymer

Shape Memory Polymer Network with Thermally Distinct Elasticity and Plasticity

Recent Progress in Shape Memory Polymer: New Behavior, Enabling Materials, and Mechanistic Understanding

A Metallosupramolecular Shape‐Memory Polymer with Gradient Thermal Plasticity

Shape memory mechanical metamaterials

Healable, Reconfigurable, Reprocessable Thermoset Shape Memory Polymer with Highly Tunable Topological Rearrangement Kinetics

Semi-crystalline Two-Way Shape Memory Elastomer

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

Reprogrammable flexible mechanical metamaterials

Magneto‐thermomechanically reprogrammable mechanical metamaterials

Magneto-thermomechanically triggered active mechanical metamaterials -- untethered, reversible, reprogrammable transformations with shape locking

Phase-transforming mechanical metamaterials with dynamically controllable shape-locking performance

4D printed multi-stable metamaterials with mechanically tunable performance

Light‐Coded Digital Crystallinity Patterns Toward Bioinspired 4D Transformation of Shape‐Memory Polymers

Digital light fabrication of reversible shape memory polymers

A reprogrammable mechanical metamaterial with origami functional-group transformation and ring reconfiguration

4D Fabrication of Two‐Way Shape Memory Polymeric Composites by Electrospinning and Melt Electrowriting

Reconfigurable and Reprocessable Thermadapt Stress‐Free Two‐Way Shape Memory Polymers Based on a Dual Crosslinking Network with Outstanding Mechanical Properties

Arbitrarily Reconfigurable and Thermadapt Reversible Two-Way Shape Memory Poly(thiourethane) Accomplished by Multiple Dynamic Covalent Bonds

Magnetically Driven Modular Mechanical Metamaterials with High Programmability, Reconfigurability, and Multiple Applications

Wave characteristics of reconfigurable elastic metamaterials based on a multi-stable structure