Abstract:Methane hydrates (MHs) are deemed to be a potential energy source to meet the overwhelmingly growing demand for natural gas. The production of MHs involves many controlling processes such as heat transfer, fluid dynamics and hydrate reaction kinetics. Local thermal equilibrium (LTE) between solid and fluid phases was typically assumed when modeling the hydrate production, however, in many cases the local thermal non-equilibrium (LTNE) caused by the complex heat transfer processes at the pore scale cannot be neglected. In this work, a LTNE model was adopted to reflect the multiple heat transfer forms associated with hydrate dissociation and gas-liquid flow, particularly the solid-fluid interfacial convective heat transfer and the Joule-Thomson effect. The LTNE phenomenon and Joule-Thomson effect were hinted by a hydrate dissociation experiment carried out for model verification. The results show that the average estimation errors of temperature, cumulative gas and water production profiles between experiment and LTNE model were 7.70%, 6.63% and 4.02%, respectively, which are considerably better than those of the traditional LTE model (16.44%, 11.74% and 10.89%, respectively). A tenfold increase of interfacial convective heat transfer coefficient could reduce the local solid-fluid temperature difference by about 78.5%. A special focus was given to the Joule-Thomson effect which seemed to have less impact at the experimental condition in this work but become more significant when the gas saturation exceeds 40%. This work could add further insights into the thermal performance during hydrate dissociation in porous media, help to reveal the thermo-kinetic relationship at the pore scale and provide a more accurate estimation of the hydrate dissociation dynamics. It could be potentially employed to optimize the methane hydrate production strategies, minimize the risk of hydrate re-formation and maximize the overall energy recovery efficiency.

A simplified isotropic compression model for methane hydrate-bearing sediment

One-dimensional Analytical Model for Thermo-Hydro-mechanical Coupling Behaviour of Hydrates Overlying Layer During Gas Production

A bounding surface plasticity model for methane hydrate-bearing sediments in deep seabed

A Critical State Constitutive Model for Methane Hydrate‐Bearing Sediments Considering Hydrate Pore‐Filling and Cementing Effects

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

MSDM-MHBS: A novel multi-scale damage constitutive model for methane hydrate-bearing sediments considering the influence of fine content and hydrate saturation

Role of Mechanical Deformation in the Thermal Transport of Si-Type Methane Hydrate.

A bounding surface model of methane hydrate-bearing carbonate sand-silt mixtures

Experimental Investigation on Methane Hydrate-Bearing Sediment Permeability under a Wide Range of Conditions

The Effect of Hydrate Formation Conditions on the Mechanics of Laboratory Methane Hydrate‐Bearing Sediments

Geomechanical Constitutive Modelling of Gas Hydrate-Bearing Sediments by a State-Dependent Multishear Bounding Surface Model

Mechanical properties and constitutive model of high-abundance methane hydrates containing clayey–silt sediments

SPF-MHBS: a Stress Partition Constitutive Framework for Methane Hydrate-Bearing Sediments

Modeling and characterizing the thermal and kinetic behavior of methane hydrate dissociation in sandy porous media

Study on the multiphase heat and mass transfer mechanism in the dissociation of methane hydrate in reconstructed real-shape porous sediments

Mechanical behaviors of natural gas hydrate-bearing clayey-silty sediments: Experiments and constitutive modeling

Dissociation and transport modeling of methane hydrate in core-scale sandy sediments: A comparative study

Thermo-Hydro-Mechanic-Chemical coupling model for hydrate-bearing sediment within a unified granular thermodynamic theory

Strengthening and Weakening of Methane Hydrate by Water Vacancies

Mechanical behavior of clayey methane hydrate-bearing sediment: Effects of pore size and physicochemical characteristics using a novel DEM contact model

Pore-scale modelling of elastic properties in hydrate-bearing sediments using 4-D synchrotron radiation imaging