Abstract:This article discusses the use of the dynamic hydrogen bubble template (DHBT) technique for in situ electrodeposition and simultaneous formation of NiCoMn trimetallic alloy nanosheets on nickel foam (NF). Compared to Ni/NF metallic and NiCo/NF, NiMn/NF, and CoMn/NF bimetallic electrodes, the NiCoMn/NF trimetallic alloy electrocatalyst exhibited favorable activity and durability. It provides current densities of −10, −100, −500, and −1000 mA cm −2 at overpotentials of −33, −131, −168, and −242 mV, respectively, and shows a Tafel slope of 44.2 mV dec −1 . Additionally, the NiCoMn/NF electrode can maintain its stability without significant degradation in the morphology, while delivering a high current density for the HER (−500 mA cm −2 at 150 h). Utilizing a NiCoMn/NF‖NiCoMn/NF pair in a water splitting setup achieved an activation potential of 1.43 V at 10 mA cm −2 current density. Furthermore, the NiCoMn/NF‖NiCoMn/NF couple can withstand a 300 h chronopotentiometry test to provide a current density of 100 mA cm −2 with high durability. In situ and simultaneous synthesis with a fast, simple, and low-cost technique, the special morphology, the high synergy between Ni, Co, and Mn elements, and the superhydrophobic properties and extensive electrochemically active surface area with an ability to provide high current density are key advantages of the NiCoMn/NF electrocatalyst. Our quantum chemical calculations using density functional theory (DFT) revealed the synergistic role of Co and Mn in enhancing the efficiency of water splitting. Specifically, Co atoms significantly increase the conductivity, while Mn atoms, identified as the most reactive sites, primarily drive the HER, followed by Co and then Ni. This synergy between Co and Mn is crucial for optimizing catalytic performance in water splitting. These features add to the importance of its industrial usage for the sustainable development of hydrogen energy.

Activating Interfacial Electron Redistribution in Lattice‐matched Biphasic Ni3N‐Co3N for Energy‐efficient Electrocatalytic Hydrogen Production via Coupled Hydrazine Degradation

Simultaneous Interfacial Chemistry and Inner Helmholtz Plane Regulation for Superior Alkaline Hydrogen Evolution

Heterostructured ZnIn2S4/Ni2P/NiS on Nickel Foam As Self-Supported Ph-All Electrocatalysts for Hydrogen Evolution

Synergistic Interfacial and Doping Engineering of Heterostructured NiCo(OH)x-CoyW as an Efficient Alkaline Hydrogen Evolution Electrocatalyst

Realizing the Synergy of Interface Engineering and Chemical Substitution for Ni 3 N Enables its Bifunctionality Toward Hydrazine Oxidation Assisted Energy‐Saving Hydrogen Production

Interfacial engineering induced highly efficient CoNiP@NiFe layered double hydroxides bifunctional electrocatalyst for water splitting

Designing Efficient Non‐Precious Metal Electrocatalysts for High‐Performance Hydrogen Production: A Comprehensive Evaluation Strategy

V-doped Ni3N/Ni heterostructure with engineered interfaces as a bifunctional hydrogen electrocatalyst in alkaline solution: Simultaneously improving water dissociation and hydrogen adsorption

Interface engineering of hierarchical NiCoP/NiCoSx heterostructure arrays for efficient alkaline hydrogen evolution at large current density.

Interfacial electronic engineering of a Ni<sub>3</sub>ZnC<sub>0.7</sub>/Ni heterostructure embedded in N-doped carbon nanotubes for efficient alkaline electrocatalytic hydrogen evolution

Interfacial electronic engineering of Ni3ZnC0.7/Ni heterostructure embedded in N-doped carbon nanotubes for efficient alkaline electrocatalytic hydrogen evolution

Design of Ni3N/Co2N Heterojunctions for Boosting Electrocatalytic Alkaline Overall Water Splitting

NiFe Hydroxide Supported on Hierarchically Porous Nickel Mesh As a High-Performance Bifunctional Electrocatalyst for Water Splitting at Large Current Density

Engineering CoN/Ni(OH)2 Heterostructures with Improved Intrinsic Interfacial Charge Transfer Toward Simultaneous Hydrogen Generation and Urea-Rich Wastewater Purification

Mn-doped NiCoP Nanopin Arrays as High-Performance Bifunctional Electrocatalysts for Sustainable Hydrogen Production via Overall Water Splitting

In situ electrochemical synthesis of superhydrophilic NiCoMn trimetallic-alloy nanosheets via the dynamic hydrogen bubble template method for developing high current density hydrogen production electrocatalysts

Regulating the Electronic Structure and Active Sites in Ni Nanoparticles by Coating N-Doped C Layer and Porous Structure for an Efficient Overall Water Splitting

An efficient Ni3S2–Ni electrode constructed by a one-step powder metallurgy approach for the hydrogen evolution reaction

Electron and surface engineering of Ni 2 P/MnP 4 heterojunction as high performance bifunctional electrocatalyst for amperage-level overall water splitting

Hierarchical MoN@NiFe‐LDH Heterostructure Nanowire Array for Highly Efficient Electrocatalytic Hydrogen Evolution

Multi-interfacial engineering of Coil-like NiS-Ni2P/Ni hybrid to efficiently boost electrocatalytic hydrogen generation in alkaline and neutral electrolyte