Abstract:The production of green hydrogen is a promising alternative to fossil fuels. The current study focuses on the design of microalgae as a catalyst in bioelectrochemical systems for the generation of biohydrogen. Furthermore, the abovementioned target could be achieved by optimizing different parameters, including strains of microalgae, different optical filters, and their shapes. Synechocystis sp. PAK13 (Ba9), Micractinium sp. YACCYB33 (R4), and Desmodesmus intermedius (Sh42) were used and designed as free cells and immobilized microalgae for evaluating their performance for hydrogen production. Alginate was applied for immobilization not only for protecting the immobilized microalgae from stress but also for inhibiting the agglomeration of microalgae and improving stability. The amount of studied immobilized microalgae was 0.01 g/5 ml algae-dissolved in 10 ml alginate gel at 28 °C, 12 h of light (light intensity 30.4 μmol m-2 s-1), and 12 h of darkness with continual aeration (air bump in every strain flask) at pH = 7.2 ± 0.2 in 0.05 %wuxal buffer which has 3.7 ionic strength. Different modalities, including FTIR, UV, and SEM, were performed for the description of selected microalgae. The surface morphology of Ba9 with alginate composite (immobilized Ba9) appeared as a stacked layer with high homogeneity, which facilitates hydrogen production from water. The conversion efficiencies of the immobilized microalgae were evaluated by incident photon-to-current efficiency (IPCE). Under optical filters, the optimum IPCE value was ∼ 7 % at 460 nm for immobilized Ba9. Also, its number of hydrogen moles was calculated to be 16.03 mmol h-1 cm-2 under optical filters. The electrochemical stability of immobilized Ba9 was evaluated through repetitive 100 cycles as a short-term stability test, and the curve of chrono-amperometry after 30 min in 0.05 %wuxal at a constant potential of 0.9 V for 30 min of all studied samples confirmed the high stability of all sample and the immobilized Ba9 has superior activity than others.

FERMENTATIVE AND PHOTOCHEMICAL PRODUCTION OF HYDROGEN IN ALGAE

Fermentative Hydrogen Production Using Algal Biomass As Feedstock

Effect of Light/Dark Regimens on Hydrogen Production by Tetraselmis subcordiformis Coupled with an Alkaline Fuel Cell System

Growth and hydrogen production by Chlorella vulgaris Pa-023 under sulfur and nitrogen deprivation

Fermentative Hydrogen Production Using Pretreated Microalgal Biomass As Feedstock

Elimination of the flavodiiron electron sink facilitates long-term H2 photoproduction in green algae

Hydrogen from Photo Fermentation

New insights into enhancement of bio-hydrogen production through encapsulated microalgae with alginate under visible light irradiation

Development of a Microalgae-Based Continuous Starch-to-Hydrogen Conversion Approach

Combination of Dark- and Photo-Fermentation to Improve Hydrogen Production from Arthrospira Platensis Wet Biomass with Ammonium Removal by Zeolite

Characterization of H2 photoproduction by marine green alga Tetraselmis subcordiformis integrated with an alkaline fuel cell

Prolonged hydrogen production by engineered green algae photovoltaic power stations

Biophotolytic H2 production using alginate-immobilized chloroplasts, enzymes and synthetic catalysts

Production of hydrogen by microbial fermentation

Algal cell bionics as a step towards photosynthesis-independent hydrogen production

Silicification‐Induced Cell Aggregation for the Sustainable Production of H2 under Aerobic Conditions

An algal photoenzyme converts fatty acids to hydrocarbons

Free Ammonia Pretreatment to Improve Bio-hydrogen Production from Anaerobic Dark Fermentation of Microalgae

Photosynthesis-fermentation Hybrid System to Produce Lipid Feedstock for Algal Biofuel

Biohydrogen production from microalgae-Major bottlenecks and future research perspectives

Bioengineering aspects of biophotolysis