Propionic acidemia and optic neuropathy: a report of two cases.

C. Arias,E. Raimann,P. Peredo,J. Cabello,G. Castro,A. Valiente,A. de la Parra,P. Bravo,Cecilia Okuma,V. Cornejo

DOI: https://doi.org/10.1007/8904_2013_234

JIMD Reports

Abstract:

What problem does this paper attempt to address?

Formation of mineralized nodules by bone marrow derived cells in a 2D and 3D matrix

T Kiefer,T Cao,DM Hutmacher,SH Teoh

2000-01-01

Abstract:Bone marrow samples were cultured within T-75 culture flasks and PCL scaffolds in the presence of ascorbic acid 2 phosphate (200 uM/L), beta glycero phosphate (10 mM/L) and at specific time points with dexamethasone (10 nM/L). After 42 days, a mineralized extracellular matrix with bone nodules was developed within the cell cultures and the PCL scaffolds. The establishment of the osteoblastic phenotype was assessed by the activity of alkaline phosphatase, osteocalcin production and by Von Kossa staining. This study showed that marrow stromal stem cells within primary bone cell cultures, derived from periosteum and bone marrow can differentiate into the osteoblast cell lineage. The osteoprogenitor cells differentiate into osteoblasts which were capable to produce alkaline phosphatase, osteocalcin and mineralized matricies on the PCL scaffolds.
Proliferation and Differentiation of Human Osteoblasts Within 3D Printed Poly-Lactic-co-Glycolic Acid Scaffolds

Zigang Ge,Lishan Wang,Boon Chin Heng,Xian-Feng Tian,Kai Lu,Victor Tai Weng Fan,Jin Fei Yeo,Tong Cao,Eunice Tan

DOI: https://doi.org/10.1177/0885328208094301

2008-01-01

Journal of Biomaterials Applications

Abstract:Bone repair and regeneration can be enhanced through implantation of biocompatible and biodegradable scaffolds, which serve primarily as osteoconductive moieties. In this study, the mechanical properties and microenviroment of 3D printed poly-lactic-co-glycolic acid (PLGA) scaffolds are examined. Additionally, the proliferation and differentiation of human fetal osteoblasts are evaluated after 3 weeks of in vitro culture on the scaffolds. The results showed that the PLGA scaffolds examined had mechanical properties similar to that of trabecular bone, but was still much weaker compared to cortical bone. In addition to general porosity, the PLGA scaffolds also had micropores within macropore walls. Cultured human osteoblasts could proliferate upon seeding on the PLGA scaffolds. Alkaline phosphatase activity and osteonectin expression of the osteoblasts cultured on the PLGA scaffolds remained stable over three weeks, whilst expression of collagen type I and osteopontin decreased. The alkaline phosphatase activity of osteoblasts cultured on PLGA scaffolds is comparable with that from two commercially-available scaffolds — OPLA and collagen scaffolds (Becton—Dickinson (BD) Inc., Franklin Lakes, NJ, USA). Hence, the results suggested that the PLGA scaffolds examined are conducive for promoting osteogenesis.
Short Periods of Cyclic Mechanical Strain Enhance Triple-Supplement Directed Osteogenesis and Bone Nodule Formation by Human Embryonic Stem Cells in Vitro

Mingming Li,Xiaobing Li,Murray C. Meikle,Intekhab Islam,Tong Cao

DOI: https://doi.org/10.1089/ten.tea.2012.0308

IF: 4.08

2013-01-01

Tissue Engineering Part A

Abstract:Human embryonic stem cells (hESCs) are uniquely endowed with a capacity for both self-renewal and multilineage differentiation. The aim of this investigation was to determine if short periods of cyclic mechanical strain enhanced dexamethasone, ascorbic acid, and -glycerophosphate (triple-supplement)-induced osteogenesis and bone nodule formation by hESCs. Colonies were cultured for 21 days and divided into control (no stretch) and three treatment groups; these were subjected to in-plane deformation of 2% for 5s (0.2 Hertz) every 60s for 1h on alternate days in BioFlex plates linked to a Flexercell strain unit over the following periods (day 7-13), (day 15-21), and (day 7-21). Numerous bone nodules were formed, which stained positively for osteocalcin and type I collagen; in addition, MTS assays for cell number as well as total collagen assays showed a significant increase in the day 7-13 group compared to controls and other treatment groups. Alizarin Red staining further showed that cyclic mechanical stretching significantly increased the nodule size and mineral density between days 7-13 compared to control cultures and the other two experimental groups. We then performed a real-time polymerase chain reaction (PCR) microarray on the day 7-13 treatment group to identify mechanoresponsive osteogenic genes. Upregulated genes included the transcription factors RUNX2 and SOX9, bone morphogenetic proteins BMP1, BMP4, BMP5, and BMP6, transforming growth factor- family members TGFB1, TGFB2, and TGFB3, and three genes involved in mineralizationALPL, BGLAP, and VDR. In conclusion, this investigation has demonstrated that four 1-h episodes of cyclic mechanical strain acted synergistically with triple supplement to enhance osteogenesis and bone nodule formation by cultured hESCs. This suggests the development of methods to engineer three-dimensional constructs of mineralized bone in vitro, could offer an alternative approach to osseous regeneration by producing a biomaterial capable of providing stable surfaces for osteoblasts to synthesize new bone, while at the same time able to be resorbed by an osteoclastic activityin other words, one that can recapitulate the remodeling dynamics of a naturally occurring bone matrix.
A DFT computational study of spin crossover in iron(III) and iron(II) tripodal imidazole complexes. A comparison of experiment with calculations.

G. Brewer,Myro Joy Olida,A. Schmiedekamp,C. Viragh,P. Zavalij

DOI: https://doi.org/10.1039/B607588F

IF: 4

2006-11-27

Dalton Transactions

Abstract:B3LYP* functionals were used to model the sixteen iron(II) (1A, LS and 5T, HS) and iron(III) (2T, LS and 6A, HS) complexes of the 1 : 3 Schiff base condensate of tris(2-aminoethyl)amine and imidazole-4-carboxaldehyde, H3L1, and its deprotonated forms, [H2L1]1-, [HL1]2-, and [L1]3-. This ligand system is unusual in that [FeH3L1]3+, [FeH3L1]2+ and [FeL1]- all exhibit a spin crossover between 100-300 K. This makes these complexes ideal for a hybrid DFT computational approach and provides an opportunity to refine the value of the exact exchange admixture parameter, c3, and to predict properties of partially protonated complexes that are not experimentally available. The accepted value of 0.20 is larger than the value of approximately 0.13 that was found to best reproduce experimental data in terms of spin state predictions. With iron(III) B3LYP calculations showed that all of the complexes were low spin at 298 K with the exception of [FeH3L1]3+ which is spin crossover in agreement with experimental results. It was also shown for iron(III) that the ligand field increased as the number of protons decreased. In contrast all of the iron(II) complexes were close to the spin crossover region regardless of protonation state. Experimental structures are fairly well modeled by this system in regard to the key structural indicators of spin state, which are the bite and trans angles. The calculated iron to nitrogen atom distances are always larger in the high spin form than the low spin form but all iron to nitrogen bond distances are larger than the experimental values. In general non-bonded interactions are not well modeled by this methodology.
Primary Human Osteoblasts Cultured in a 3D Microenvironment Create a Unique Representative Model of Their Differentiation Into Osteocytes

Gabriele Nasello,Pilar Alamán-Díez,Jessica Schiavi,María Ángeles Pérez,Laoise McNamara,José Manuel García-Aznar

DOI: https://doi.org/10.3389/fbioe.2020.00336

IF: 5.7

2020-04-24

Frontiers in Bioengineering and Biotechnology

Abstract:Microengineered systems provide an in vitro strategy to explore the variability of individual patient response to tissue engineering products, since they prefer the use of primary cell sources representing the phenotype variability. Traditional in vitro systems already showed that primary human osteoblasts embedded in a 3D fibrous collagen matrix differentiate into osteocytes under specific conditions. Here, we hypothesized that translating this environment to the organ-on-a-chip scale creates a minimal functional unit to recapitulate osteoblast maturation toward osteocytes and matrix mineralization. Primary human osteoblasts were seeded in a type I collagen hydrogel, to establish the role of lower (2.5 × 105 cells/ml) and higher (1 × 106 cells/ml) cell density on their differentiation into osteocytes. A custom semi-automatic image analysis software was used to extract quantitative data on cellular morphology from brightfield images. The results are showing that cells cultured at a high density increase dendrite length over time, stop proliferating, exhibit dendritic morphology, upregulate alkaline phosphatase (ALP) activity, and express the osteocyte marker dental matrix protein 1 (DMP1). On the contrary, cells cultured at lower density proliferate over time, do not upregulate ALP and express the osteoblast marker bone sialoprotein 2 (BSP2) at all timepoints. Our work reveals that microengineered systems create unique conditions to capture the major aspects of osteoblast differentiation into osteocytes with a limited number of cells. We propose that the microengineered approach is a functional strategy to create a patient-specific bone tissue model and investigate the individual osteogenic potential of the patient bone cells.

multidisciplinary sciences
PI3K/AKT pathway involvement in the osteogenic effects of osteoclast culture supernatants on preosteoblast cells.

Li-Li Chen,Mei Huang,Jing-Yi Tan,Xiao-Tao Chen,Li-Hong Lei,Yan-Min Wu,Di-Ya Zhang

DOI: https://doi.org/10.1089/ten.tea.2012.0469

IF: 4.08

2013-01-01

Tissue Engineering Part A

Abstract:This study aimed to investigate the ability of osteoclasts during bone resorption activities to regulate the differentiation and calcification of osteoblast precursor cells. The bone resorption model was established using in vitro cortical bone slices and mouse RAW264.7 cells, which were differentiated into osteoclasts by stimulation with the receptor activator of nuclear factor-B ligand and macrophage colony-stimulating factor. Tartrate-resistant acid phosphatase (TRAP) staining, reverse transcriptase-polymerase chain reaction (RT-PCR), and scanning electron microscopy (SEM) were used to detect osteoclast differentiation. The osteoblast precursor cell line MC3T3-E1 was cultured with the bone resorption supernatant (BRS). Involvement of the phosphatidylinositol 3-kinase (PI3K)/AKT pathway in osteogenesis was evaluated by Western blotting, RT-PCR, and ELISA analysis of markers of the early (runt-related transcription factor-2 and alkaline phosphatase) and late (osteocalcin [OCN]) stages of osteogenesis, and Alizarin Red S staining of matrix mineralization. TRAP staining, RT-PCR, and SEM analysis demonstrated the successful establishment of the bone resorption model. Osteoclast BRS effectively increased the differentiation and calcification of MC3T3-E1 cells. Western blot analysis indicated that the BRS enhanced AKT and p-AKT expression levels in MC3T3-E1 cells. Following AKT2 knockdown and treatment with the PI3K/AKT pathway inhibitor LY294002, the expression of OCN in MC3T3-E1 cells was decreased (p<0.05), as was the calcification area (p<0.05). The data obtained in this study indicated that the osteoclast bone resorption medium promoted the differentiation and calcification of MC3T3-E1 cells and that the PI3K/AKT pathway played a role in this process.
A 3D bioreactor model to study osteocyte differentiation and mechanobiology under perfusion and compressive mechanical loading

Wyonna Darleen Rindt,Melanie Krug,Shuntaro Yamada,Franziska Sennefelder,Louisa Belz,Wen-Hui Cheng,Muhammad Azeem,Martin Kuric,Marietheres Evers,Ellen Leich,Tanja Nicole Hartmann,Ana Rita Pereira,Marietta Hermann,Jan Hansmann,Camilla Mussoni,Philipp Stahlhut,Taufiq Ahmad,Mohammed Ahmed Yassin,Kamal Mustafa,Regina Ebert,Franziska Jundt

DOI: https://doi.org/10.1016/j.actbio.2024.06.041

Abstract:Osteocytes perceive and process mechanical stimuli in the lacuno-canalicular network in bone. As a result, they secrete signaling molecules that mediate bone formation and resorption. To date, few three-dimensional (3D) models exist to study the response of mature osteocytes to biophysical stimuli that mimic fluid shear stress and substrate strain in a mineralized, biomimetic bone-like environment. Here we established a biomimetic 3D bone model by utilizing a state-of-art perfusion bioreactor platform where immortomouse/Dmp1-GFP-derived osteoblastic IDG-SW3 cells were differentiated into mature osteocytes. We evaluated proliferation and differentiation properties of the cells on 3D microporous scaffolds of decellularized bone (dBone), poly(L-lactide-co-trimethylene carbonate) lactide (LTMC), and beta-tricalcium phosphate (β-TCP) under physiological fluid flow conditions over 21 days. Osteocyte viability and proliferation were similar on the scaffolds with equal distribution of IDG-SW3 cells on dBone and LTMC scaffolds. After seven days, the differentiation marker alkaline phosphatase (Alpl), dentin matrix acidic phosphoprotein 1 (Dmp1), and sclerostin (Sost) were significantly upregulated in IDG-SW3 cells (p = 0.05) on LTMC scaffolds under fluid flow conditions at 1.7 ml/min, indicating rapid and efficient maturation into osteocytes. Osteocytes responded by inducing the mechanoresponsive genes FBJ osteosarcoma oncogene (Fos) and prostaglandin-endoperoxide synthase 2 (Ptgs2) under perfusion and dynamic compressive loading at 1 Hz with 5 % strain. Together, we successfully created a 3D biomimetic platform as a robust tool to evaluate osteocyte differentiation and mechanobiology in vitro while recapitulating in vivo mechanical cues such as fluid flow within the lacuno-canalicular network. STATEMENT OF SIGNIFICANCE: This study highlights the importance of creating a three-dimensional (3D) in vitro model to study osteocyte differentiation and mechanobiology, as cellular functions are limited in two-dimensional (2D) models lacking in vivo tissue organization. By using a perfusion bioreactor platform, physiological conditions of fluid flow and compressive loading were mimicked to which osteocytes are exposed in vivo. Microporous poly(L-lactide-co-trimethylene carbonate) lactide (LTMC) scaffolds in 3D are identified as a valuable tool to create a favorable environment for osteocyte differentiation and to enable mechanical stimulation of osteocytes by perfusion and compressive loading. The LTMC platform imitates the mechanical bone environment of osteocytes, allowing the analysis of the interaction with other cell types in bone under in vivo biophysical stimuli.
The Development and Identification of Animal Osteoblasts from Bone Marrow Culture

X Chen,W Yan,J Yu,B Fong,X Zheng

DOI: https://doi.org/10.3321/j.issn:1001-5515.2001.03.023

2001-01-01

Abstract:This study was aimed to evaluate a modified method for animal osteoblast marrow culture on the basis of previously published method. The marrow mononuclear cells(MMNC) in femoral bone-marrow of SD rat were gained with Ficoll-Hapaque centrifuge, which were then cultured in 5 x 10(5) cells/cm3 on the 96-well culture plates with RPMI 1640 medium containing 30% horse serum in a humidified atmosphere of 5% carbon dioxide at 37 degree Celsius. The medium was changed every three days. Cultured cells were identified with inverted microscopy for observing the shape of living cells, and with Wright-Geimsa mixture stain and Alkaline phosphatase (ALP) stain. In order to avoid false positive reaction, we caused damage to the ALP in cultured cells and stained the cells with ALP again for comparison. The results of inverted microscopy showed that the small spherical mononuclear cells became polygonal, spindle-shaped or squamous successively from the fifth day onward. Wright-Geimsa staining showed the specific property of osteoblast. ALP stain positive reaction was between "2+" and "3+", then ALP stain negative reaction was noticed after the damage to ALP. These data demonstrated that MMNC in SD rat could become osteoblast in RPMI 1640 medium containing 30% horse serum. The modified osteoblast marrow culture method has the advantages of short time, less risk of contamination and higher efficiency.
Aggregation of human osteoblasts unlocks self-reliant differentiation and constitutes a microenvironment for 3D-co-cultivation with other bone marrow cells

Sabrina Marozin,Birgit Simon-Nobbe,Astrid Huth,Evelyn Beyerer,Laurenz Weber,Andreas Nüssler,Günter Lepperdinger

DOI: https://doi.org/10.1038/s41598-024-60986-8

IF: 4.6

2024-05-08

Scientific Reports

Abstract:Skeletal bone function relies on both cells and cellular niches, which, when combined, provide guiding cues for the control of differentiation and remodeling processes. Here, we propose an in vitro 3D model based on human fetal osteoblasts, which eases the study of osteocyte commitment in vitro and thus provides a means to examine the influences of biomaterials, substances or cells on the regulation of these processes. Aggregates were formed from human fetal osteoblasts (hFOB1.19) and cultivated under proliferative, adipo- and osteoinductive conditions. When cultivated under osteoinductive conditions, the vitality of the aggregates was compromised, the expression levels of the mineralization-related gene DMP1 and the amount of calcification and matrix deposition were lower, and the growth of the spheroids stalled. However, within spheres under growth conditions without specific supplements, self-organization processes occur, which promote extracellular calcium deposition, and osteocyte-like cells develop. Long-term cultivated hFOB aggregates were free of necrotic areas. Moreover, hFOB aggregates cultivated under standard proliferative conditions supported the co-cultivation of human monocytes, microvascular endothelial cells and stromal cells. Overall, the model presented here comprises a self-organizing and easily accessible 3D osteoblast model for studying bone marrow formation and in vitro remodeling and thus provides a means to test druggable molecular pathways with the potential to promote life-long bone formation and remodeling.

multidisciplinary sciences
In vitro bioprinted 3D model enhancing osteoblast-to-osteocyte differentiation

Sarah Pragnere,Lucie Essayan,Naima el-Kholti,Emma Petiot,Cyril Paillet-Mattei

DOI: https://doi.org/10.1088/1758-5090/ad8ca6

2024-10-31

Biofabrication

Abstract:In vitro bone models are pivotal for understanding tissue behavior and cellular responses, particularly in unravelling certain pathologies' mechanisms and assessing the impact of new therapeutic interventions. A desirable in vitro bone model should incorporate primary human cells within a 3D environment that mimics the mechanical properties characteristics of osteoid and faithfully replicate all stages of osteogenic differentiation from osteoblasts to osteocytes. However, to date, no bio-printed model using primary osteoblasts has demonstrated the expression of osteocytic protein markers. This study aimed to develop bio-printed in vitro model that accurately captures the differentiation process of human primary osteoblasts into osteocytes. Given the considerable impact of hydrogel stiffness and relaxation behavior on osteoblast activity, we employed three distinct cross-linking solutions to fabricate hydrogels. These hydrogels were designed to exhibit either similar elastic behavior with different elastic moduli, or similar elastic moduli with varying relaxation behavior. These hydrogels, composed of gelatin (5% w/v), alginate (1%w/v) and fibrinogen (2%w/v), were designed to be compatible with micro-extrusion bioprinting and proliferative. The modulation of their biomechanical properties, including stiffness and viscoelastic behavior, was achieved by applying various concentrations of cross-linkers targeting both gelatin covalent bonding (transglutaminase) and alginate chains' ionic cross-linking (calcium). Among the conditions tested, the hydrogel with a low elastic modulus of 8 kPa and a viscoelastic behavior over time exhibited promising outcomes regarding osteoblast-to-osteocyte differentiation. The cessation of cell proliferation coincided with a significant increase in alkaline phosphatase (ALP) activity, the development of dendrites, and the expression of the osteocyte marker PHEX. Within this hydrogel, cells actively influenced their environment, as evidenced by hydrogel contraction and the secretion of collagen I. This bio-printed model, demonstrating primary human osteoblasts expressing an osteocyte-specific protein, marks a significant achievement. We envision its substantial utility in advancing research on bone pathologies, including osteoporosis and bone tumors.

engineering, biomedical,materials science, biomaterials
Establishment and validation of an efficient method for the 3D culture of osteoclasts in vitro

Abdullah Faqeer,Jie Liu,Li Zhang,Changde Wang,Guangqian Zhou,Yang Zhang

DOI: https://doi.org/10.1016/j.jdent.2024.104957

IF: 4.991

2024-04-07

Journal of Dentistry

Abstract:Introduction Osteoclasts (OCs) play a crucial role in maintaining bone health. Changes in OC activity are linked to different bone diseases, making them an intriguing focus for research. However, most studies on OCs have relied on 2D cultures, limiting our understanding of their behavior. Yet, there's a lack of knowledge regarding platforms that effectively support osteoclast formation in 3D cultures. Methods In our investigation, we explored the capacity of collagen and GelMA hydrogels to facilitate osteoclast development in 3D culture settings. We assessed the osteoclast development by using different hydrogels and cell seeding strategies and optimizing cell seeding density and cytokine concentration. The osteoclast development in 3D cultures was further validated by biochemical assays and immunochemical staining. Results Our findings revealed that 0.3 % (w/v) collagen was conducive to osteoclast formation in both 2D and 3D cultures, demonstrated by increased multinucleation and higher TRAP activity compared to 0.6 % collagen and 5 % to 10 % (w/v) GelMA hydrogels. Additionally, we devised a "sandwich" technique using collagen substrates and augmented the initial macrophage seeding density and doubling cytokine concentrations, significantly enhancing the efficiency of OC culture in 3D conditions. Notably, we validated osteoclasts derived from macrophages in our 3D cultures express key osteoclast markers like cathepsin K and TRAP. Conclusions To conclude, our study contributes to establishing an effective method for cultivating osteoclasts in 3D environments in vitro. This innovative approach not only promises a more physiologically relevant platform to study osteoclast behavior during bone remodeling but also holds potential for applications in bone tissue engineering. Clinical significance This study introduces an efficient method for cultivating osteoclasts in 3D environments in vitro . It offers a more physiologically relevant platform to investigate osteoclast behavior and holds promise to advance research in bone biology and regenerative dentistry.

dentistry, oral surgery & medicine
An advanced tri‐culture model to evaluate the dynamic interplay among osteoblasts, osteoclasts, and endothelial cells

Stefania Pagani,Paola Torricelli,Francesca Veronesi,Francesca Salamanna,Simona Cepollaro,Milena Fini

DOI: https://doi.org/10.1002/jcp.25875

2017-05-03

Journal of Cellular Physiology

Abstract:The dynamic metabolism and the numerous roles of bone tissue necessitate a suitable in vitro model to represent them. In order to investigate the interaction among the several cell types composing bone microenvironment, we studied a tri-culture model including human osteoblasts (OBs), osteoclasts (OCs), and endothelial cells (HUVEC). While OBs are essential for bone deposition and OCs for bone resorption, the vasculature is necessary to provide growth factors, nutrients, and oxygen in the mature tissue. The results of this study showed a strong mutual influence between OBs, OCs, and HUVEC in term of proliferation, viability, and activity (release of ALP, Coll I, OPG, RANKL, VEGF, CTSK, TGFβ, and IL-6). The behavior of the single cultures demonstrated to be different compared to the bi- or tri-cultures and depending on the cell types involved: the coexistence of OBs and OCs stimulated the synthetic activity of both cell types, while the presence of HUVEC induced a stimulating role for OBs but mainly an inhibitory effect for OC. In addition, evidence of the effects of OBs and OCs on HUVEC is highlighted by their morphology: regular and able to "sketch" little vessels in presence of OBs, more disorganized and heterogeneous in presence of OCs. Taken together, these observations well characterize an advanced cellular model to be used as starting point for mimicking bone microenvironment in vivo, thus reducing the use of animals in the preclinical phase and offering a more reliable tool to test new and innovative biomaterials.

cell biology,physiology
Osteogenic Differentiation Within Intact Human Embryoid Bodies Result in a Marked Increase in Osteocalcin Secretion after 12 Days of in Vitro Culture, and Formation of Morphologically Distinct Nodule-Like Structures

T Cao,BC Heng,CP Ye,H Liu,WS Toh,P Robson,P Li,YH Hong,LW Stanton

DOI: https://doi.org/10.1016/j.tice.2005.03.008

2005-01-01

Abstract:Osteogenic lineages derived from human embryonic stem cells hold much promise for clinical application in bone regeneration, in addition to providing a useful research model in developmental biology, and for pharmacological and cytotoxicity screening of bone-related biomaterials and drugs in vitro. Previously, osteogenic differentiation of human embryonic stem cells was achieved through dissociation of embryoid bodies by trypsinization, prior to culture with osteogenesis-promoting medium. This study therefore attempted a new approach: that is to achieve osteogenesis within intact human embryoid bodies. After 22 days of culture in osteogenesis-promoting medium comprising a cocktail of accorbic acid, β-glycerophosphate and dexamethasone, the attached embryoid bodies exhibited much cellular outgrowth and migration, and formed morphologically distinct nodule-like structures. These were somewhat similar to osteogenic nodules formed by mesenchymal stem cells, as reported by previous studies. Immunohistochemical staining and RT-PCR analysis confirmed the presence of osteogenic cells within these nodule-like structures. Additionally, the quantitative assay of osteocalcin secretion demonstrated a rapid sharp increase in osteocalcin expression on day 12 of in vitro culture, which could suggest the appearance of differentiated osteoblasts from day 12 onwards. Future work will attempt to investigate whether other cytokines, growth factors and chemical compounds could further enhance osteogenesis within intact human embryoid bodies.
Colonic mucosal α-synuclein lacks specificity as a biomarker for Parkinson disease.

J. Woulfe,Madison T. Gray,G. Muñoz

IF: 9.9

Neurology

Abstract:
Collaborative in vitro rumen fermentation studies on forage substrates.

R. Barnes

DOI: https://doi.org/10.2527/jas1967.2651120x

Journal of Animal Science

Abstract:
Methodology and Characterization of a 3D Bone Organoid Model Derived from Murine Cells

Jaymes Fuller,Katherine Sares Lefferts,Pooja Shah,Jessica A. Cottrell

DOI: https://doi.org/10.3390/ijms25084225

IF: 5.6

2024-04-11

International Journal of Molecular Sciences

Abstract:Here, we report on the development of a cost-effective, well-characterized three-dimensional (3D) model of bone homeostasis derived from commonly available stocks of immortalized murine cell lines and laboratory reagents. This 3D murine-cell-derived bone organoid model (3D-mcBOM) is adaptable to a range of contexts and can be used in conjunction with surrogates of osteoblast and osteoclast function to study cellular and molecular mechanisms that affect bone homeostasis in vitro or to augment in vivo models of physiology or disease. The 3D-mcBOM was established using a pre-osteoblast murine cell line, which was seeded into a hydrogel extracellular matrix (ECM) and differentiated into functional osteoblasts (OBs). The OBs mineralized the hydrogel ECM, leading to the deposition and consolidation of hydroxyapatite into bone-like organoids. Fourier-transform infrared (FTIR) spectroscopy confirmed that the mineralized matrix formed in the 3D-mcBOM was bone. The histological staining of 3D-mcBOM samples indicated a consistent rate of ECM mineralization. Type I collagen C-telopeptide (CTX1) analysis was used to evaluate the dynamics of OC differentiation and activity. Reliable 3D models of bone formation and homeostasis align with current ethical trends to reduce the use of animal models. This functional model of bone homeostasis provides a cost-effective model system using immortalized cell lines and easily procured supplemental compounds, which can be assessed by measuring surrogates of OB and OC function to study the effects of various stimuli in future experimental evaluations of bone homeostasis.

biochemistry & molecular biology,chemistry, multidisciplinary
Humanized In Vivo Bone Tissue Engineering: In Vitro Preculture Conditions Control the Structural, Cellular, and Matrix Composition of Humanized Bone Organs

Agathe Bessot,Flavia Medeiros Savi,Jennifer Gunter,Jayanti Mendhi,Shahrouz Amini,David Waugh,Jacqui McGovern,Dietmar W. Hutmacher,Nathalie Bock

DOI: https://doi.org/10.1002/adhm.202401939

IF: 10

2024-10-25

Advanced Healthcare Materials

Abstract:Mineralization prior to in vivo implantation is shown to control the outcomes of humanized bone organs. Modulated by preculture duration and culture composition as critical parameters, the findings demonstrate that advanced biomaterials loaded with osteogenic cells and minerals exhibiting higher mineralization levels yield to superior humanized ectopic bone organs, with strict control over ossification, cellular/extracellular maturation, and structural bone‐like organization. Bone tissue engineering (BTE) has long sought to elucidate the key factors controlling human/humanized bone formation for regenerative medicine and disease modeling applications, yet with no definitive answers due to the high number and co‐dependency of parameters. This study aims to clarify the relative impacts of in vitro biomimetic 'preculture composition' and 'preculture duration' before in vivo implantation as key criteria for the optimization of BTE design. These parameters are directly related to in vitro osteogenic differentiation (OD) and mineralization and are being investigated across different osteoprogenitor‐loaded biomaterials, specifically fibrous calcium phosphate‐polycaprolactone (CaP‐mPCL) scaffolds and gelatin methacryloyl (GelMA) hydrogels. The results show that OD and mineralization levels prior to implantation, enhanced by a mineralization medium supplement to the osteogenic medium (OM), significantly improve ectopic BTE outcomes, regardless of the biomaterial type. Specifically, preculture conditions are pivotal in achieving more faithful mimicry of human bone structure, cellular and extracellular matrix composition and organization, and provide control over bone marrow composition. This work emphasizes the potential of using biomimetic culture compositions, specifically the addition of a mineralization medium as a cost‐effective and straightforward approach to enhance BTE outcomes, facilitating rapid development of bone models with superior quality and resemblance to native bone.

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
A novel three-dimensional bone chip organ culture

Johannes Kuttenberger,Elzbieta Polska,Birgit M. Schaefer

DOI: https://doi.org/10.1007/s00784-012-0833-y

2012-09-08

Clinical Oral Investigations

Abstract:ObjectivesThe objective of this study was to develop a 3D bone chip organ culture model. We aimed to collect in vitro evidence of the ability of vital bone chips to promote new bone formation.Materials and methodsWe developed a 3D in vitro hypoxic bone chip organ culture model. Histology of the bone chips was performed before and after culture and immunohistochemistry after 3-week culture. The 3D culture supernatants were tested for the presence of pro-angiogenic growth factors, TGFβ1, GADPH, bone alkaline phosphatase, osteocalcin, osteonectin, osteopontin, bone sialoprotein and collagen type I.ResultsHistology after culture revealed bone chips in a matrix of fibrin remnants and a fibrous-appearing matter. Collagen type I- and IV-positive structures were also identified. Cells could be seen on the surface of the bone chips, with spindle-shaped cells bridging the bone chip particles. Pro-angiogenic growth factors and TGFβ1were detected in the 3D cell culture supernatants. The transcripts for osteocalcin, bone sialoprotein and collagen type I were revealed only via PCR.ConclusionsOur results indicate that bone chips in our 3D organ culture remain vital and may stimulate the growth of a bone-forming matrix.Clinical relevanceThe use of autogenous bone chips for oral and maxillofacial bone augmentation procedures is widespread in clinical practice. The rationale for this is that if bone chips remain vital in vivo, they could provide an environment promoting new bone formation through growth factors and cells. This 3D culture method is an essential tool for investigating the behaviour of bone chips.

dentistry, oral surgery & medicine
Optimisation of the differing conditions required for bone formation in vitro by primary osteoblasts from mice and rats

Isabel R Orriss,Mark O R Hajjawi,Carmen Huesa,Vicky E MacRae,Timothy R Arnett

DOI: https://doi.org/10.3892/ijmm.2014.1926

Abstract:The in vitro culture of calvarial osteoblasts from neonatal rodents remains an important method for studying the regulation of bone formation. The widespread use of transgenic mice has created a particular need for a reliable, simple method that allows the differentiation and bone‑forming activity of murine osteoblasts to be studied. In the present study, we established such a method and identified key differences in optimal culture conditions between mouse and rat osteoblasts. Cells isolated from neonatal rodent calvariae by collagenase digestion were cultured for 14‑28 days before staining for tissue non-specific alkaline phosphatase (TNAP) and bone mineralisation (alizarin red). The reliable differentiation of mouse osteoblasts, resulting in abundant TNAP expression and the formation of mineralised 'trabecular‑shaped' bone nodules, occurred only following culture in α minimum essential medium (αMEM) and took 21‑28 days. Dexamethasone (10 nM) inhibited bone mineralisation in the mouse osteoblasts. By contrast, TNAP expression and bone formation by rat osteoblasts were observed following culture in both αMEM and Dulbecco's modified Eagle's medium (DMEM) after approximately 14 days (although ~3‑fold more effectively in αMEM) and was strongly dependent on dexamethasone. Both the mouse and rat osteoblasts required ascorbate (50 µg/ml) for osteogenic differentiation and β‑glycerophosphate (2 mM) for mineralisation. The rat and mouse osteoblasts showed similar sensitivity to the well‑established inhibitors of mineralisation, inorganic pyrophosphate (PPi) and adenosine triphosphate (ATP; 1‑100 µM). The high efficiency of osteogenic differentiation observed following culture in αMEM, compared with culture in DMEM possibly reflects the richer formulation of the former. These findings offer a reliable technique for inducing mouse osteoblasts to form bone in vitro and a more effective method for culturing bone‑forming rat osteoblasts.
Synthetic biodegradable microporous hydrogels for in vitro 3D culture of functional human bone cell networks

Doris Zauchner,Monica Zippora Müller,Marion Horrer,Leana Bissig,Feihu Zhao,Philipp Fisch,Sung Sik Lee,Marcy Zenobi-Wong,Ralph Müller,Xiao-Hua Qin

DOI: https://doi.org/10.1038/s41467-024-49280-3

2024-06-13

Abstract:Generating 3D bone cell networks in vitro that mimic the dynamic process during early bone formation remains challenging. Here, we report a synthetic biodegradable microporous hydrogel for efficient formation of 3D networks from human primary cells, analysis of cell-secreted extracellular matrix (ECM) and microfluidic integration. Using polymerization-induced phase separation, we demonstrate dynamic in situ formation of microporosity (5-20 µm) within matrix metalloproteinase-degradable polyethylene glycol hydrogels in the presence of living cells. Pore formation is triggered by thiol-Michael-addition crosslinking of a viscous precursor solution supplemented with hyaluronic acid and dextran. The resulting microporous architecture can be fine-tuned by adjusting the concentration and molecular weight of dextran. After encapsulation in microporous hydrogels, human mesenchymal stromal cells and osteoblasts spread rapidly and form 3D networks within 24 hours. We demonstrate that matrix degradability controls cell-matrix remodeling, osteogenic differentiation, and deposition of ECM proteins such as collagen. Finally, we report microfluidic integration and proof-of-concept osteogenic differentiation of 3D cell networks under perfusion on chip. Altogether, this work introduces a synthetic microporous hydrogel to efficiently differentiate 3D human bone cell networks, facilitating future in vitro studies on early bone development.

Propionic acidemia and optic neuropathy: a report of two cases.

Formation of mineralized nodules by bone marrow derived cells in a 2D and 3D matrix

Proliferation and Differentiation of Human Osteoblasts Within 3D Printed Poly-Lactic-co-Glycolic Acid Scaffolds

Short Periods of Cyclic Mechanical Strain Enhance Triple-Supplement Directed Osteogenesis and Bone Nodule Formation by Human Embryonic Stem Cells in Vitro

A DFT computational study of spin crossover in iron(III) and iron(II) tripodal imidazole complexes. A comparison of experiment with calculations.

Primary Human Osteoblasts Cultured in a 3D Microenvironment Create a Unique Representative Model of Their Differentiation Into Osteocytes

PI3K/AKT pathway involvement in the osteogenic effects of osteoclast culture supernatants on preosteoblast cells.

A 3D bioreactor model to study osteocyte differentiation and mechanobiology under perfusion and compressive mechanical loading

The Development and Identification of Animal Osteoblasts from Bone Marrow Culture

Aggregation of human osteoblasts unlocks self-reliant differentiation and constitutes a microenvironment for 3D-co-cultivation with other bone marrow cells

In vitro bioprinted 3D model enhancing osteoblast-to-osteocyte differentiation

Establishment and validation of an efficient method for the 3D culture of osteoclasts in vitro

An advanced tri‐culture model to evaluate the dynamic interplay among osteoblasts, osteoclasts, and endothelial cells

Osteogenic Differentiation Within Intact Human Embryoid Bodies Result in a Marked Increase in Osteocalcin Secretion after 12 Days of in Vitro Culture, and Formation of Morphologically Distinct Nodule-Like Structures

Colonic mucosal α-synuclein lacks specificity as a biomarker for Parkinson disease.

Collaborative in vitro rumen fermentation studies on forage substrates.

Methodology and Characterization of a 3D Bone Organoid Model Derived from Murine Cells

Humanized In Vivo Bone Tissue Engineering: In Vitro Preculture Conditions Control the Structural, Cellular, and Matrix Composition of Humanized Bone Organs

A novel three-dimensional bone chip organ culture

Optimisation of the differing conditions required for bone formation in vitro by primary osteoblasts from mice and rats

Synthetic biodegradable microporous hydrogels for in vitro 3D culture of functional human bone cell networks