Abstract:Battery electrolytes play an important role in battery performance and safety. To improve the formation of a solid-electrolyte interface (SEI) and overall performance, additives such as vinylene carbonate (VC) and fluoroethylene carbonate (FEC) are added to the electrolyte. A thorough understanding of the aging process is critical to the safe operation of batteries. The reactions of the liquid electrolyte, its additives and the associated gas formation play a decisive role in cell aging and cell safety. Thus they are in the focus of the BatgasMod project (Modelling of battery gassing) funded by the German Federal Ministry of Education and Research (BMBF) in the framework of the competence cluster Battery usage concepts (BattUse). The aim of the BatgasMod project is the modeling of the gassing behavior of batteries over their lifespan and the combination of electrolyte aging models with battery models for an early prediction of cell behavior in the usage phase. In order to support the modeling with aging data, three different cell variants were produced, differing in terms of their electrolyte composition. The cells were assembled at the MEET by combining commercial LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) cathode and graphite anode material together with a ceramic coated separator. The electrolyte for all three cell types is a mixture of the organic solvents EC and EMC in a ratio of 3:7 with 1M LiPF 6 . This composition without additives represents the reference cell. To investigate the influence of the additives, cells were prepared with either 5 wt.-% vinylene carbonate (VC) or 5 wt.-% fluoroethylene carbonate (FEC) as an additive. First, both at IAM-AWP and ISEA cell formation was performed to study the entire life of the cells, including the critical step of SEI formation in the first cycles. After degassing, the cells were subjected to 10 additional cycles to obtain a stable capacity for the start of the aging tests. The cells were stored in temperature chambers at 25°C with SOCs of 100%, 80%, 30% and 5%. At IAM-AWP measurements were performed under open circuit conditions to allow for self-discharge. For comparison, at ISEA the cells were aged under floating SOC conditions, i.e. the SOCs were kept constant throughout the entire measurement. At predetermined time intervals, the cells were checked for remaining capacity and pulse resistance. In both measurements the influence of the SOC is clearly visible and the high SOC leads to an increased aging. The electrolyte additives showed different results for the different aging tests. The cells without additives outperform the cells with additives under open circuit conditions. This unusual behavior was further investigated and was attributed to the high self-discharge of the cells without additives. As a result, the voltage drop leads to a lower storage SOC, which was beneficial for the aging of these cells. The electrolyte additives showed deviating results for the different aging tests. The floating SOC measurements revealed a superior performance of the cells with additives. In addition, it was found that cells containing VC have lower capacity loss but higher resistance increase than cells containing FEC. Differential voltage analysis and incremental capacity analysis were performed to better understand the dominant aging mechanisms. These methods suggest that a combination of loss of lithium inventory and impedance rise causes cell degradation. These results provide guidance for improving calendar aging by selecting the most appropriate electrolyte additive. Future work will focus on comparing the influence of additives on the safety of fresh and calendar aged cells.

Performance Changes of Lithium-Ion-Batteries due to Electrolyte-Introduced Metal Oxalate Contaminants

Effects of Catholyte Aging on High-Nickel NMC Cathodes in Sulfide All-Solid-State Batteries

Real time lithium metal calendar aging in common battery electrolytes

(Invited) Important Factors Affecting Calendar Life of Lithium Metal Batteries

Depletion of Electrolyte Salt Upon Calendaric Aging of Lithium-Ion Batteries and its Effect on Cell Performance

Extending the Calendar Life of LiNi0.8Co0.1Mn0.1O2-based Lithium-Ion Batteries Via Low-Temperature Storage

Life-cycle Evolution and Failure Mechanisms of Metal-Contaminant Defects in Lithium-Ion Batteries

Detrimental Effects of Chemical Cross-Talk in Rechargeable Lithium Metal Batteries

Complementary Electrolyte Design for Li Metal Batteries in Electric Vehicle Applications

Extending the Calendar Life of LiNi0.8Co0.1Mn0.1O2-based 0.8 Co 0.1 Mn 0.1 O 2-Based Lithium-Ion Batteries Via Low-Temperature Storage

Electrochemical Performance of Lithium-Ion Cells with Lithium- and Manganese- Rich Oxide Cathodes

Calendar Aging of Lithium-Ion Batteries: Investigating the Influence of Electrolyte Additives in Open-Circuit and Floating State-of-Charge Conditions

Revealing the degradation behaviors and mechanisms of NCM cathode in scrapped lithium-ion batteries

Reclaimed and Up-Cycled Cathodes for Lithium-Ion Batteries

Impurity removal with highly selective and efficient methods and the recycling of transition metals from spent lithium-ion batteries

The regeneration and electrochemical performance study of NCM622 cathode materials

Calendar Life of Lithium Metal Batteries: Accelerated Aging and Failure Analysis

Ageing and Post-Mortem Study of LNMO-Based Lithium Ion Battery Pouch Cells

Electrolyte Perspective on Stabilizing LiNi0.8Co0.1Mn0.1O2 Cathode for Lithium-Ion Batteries

Tuning Solvation Behavior of Ester-Based Electrolytes toward Highly Stable Lithium-Metal Batteries

Synthesis and performance of Li[(Ni1/3Co1/3Mn1/3)(1-x)Mgx]O2 prepared from spent lithium ion batteries