Abstract:This paper presents an experimental study on characterising the aerodynamic and far-field acoustic performance of rotors operating in non-axial inflow conditions. The current experiments were carried out with a two-bladed rotor, operating with a tip Mach number of 0.56, approaching the practical tip Mach numbers expected of urban air mobility vehicles. Synchronous measurements of the aerodynamic force, far-field acoustics and blade phase angle were undertaken to provide insights on both the time-averaged and phase-averaged correlation between the rotor aerodynamic loading and the emitted noise. The far-field acoustic spectra are compared across a range of advance ratios ( 0.01≤μ≤0.04 ) and forward tilting angles ( 0°≤α≤30° ). When the inflow velocity increases, both the tonal and broadband components increase. Moreover, higher harmonics of the blade passing frequency are observed to become more prominent at higher advance ratios. As the rotor tilts forward from edgewise flight conditions, the broadband noise component reduces significantly, with the tones at fundamental blade passing frequency and higher harmonics also reducing in magnitude, agreeing well with the steady and unsteady thrust coefficients measured. From the aerodynamic loading, acoustic spectra and the directivity results, a transition from near-edgewise to near-axial modes of operation can be discerned at a tilt angle of approximately 16°. More interestingly, the phase-averaged thrust and acoustic power results show notable variations of the blade loading and acoustic emission through one full rotor rotation. At higher advance ratios and shallow tilting angles, the phase location of peaks in the root-mean-square of the fluctuating thrust coefficient agrees very well with those from the acoustic power, suggesting a strong correlation between the flow unsteadiness and the noise at these non-axial conditions, contributing to higher overall sound pressure levels.

Effect of the rotor blade installation angle on the structure-borne noise generated by adjustable-blade axial-flow fans

Vibration characteristics and strength analysis of two-stage variable-pitch axial-flow fan based on fluid-solid coupling method

Effect of impeller structure on aerodynamic performance and noise reduction of a small multi-blade centrifugal fan

Smart Blade Count Selection to Align Modal Propagation Angle with Stator Stagger Angle for Low-Noise Ducted Fan Designs

Study on the Influence of Inlet Asymmetry on Aerodynamic Noise of Cooling Fan

Numerical and Experimental Investigations of Axial Flow Fan with Bionic Forked Trailing Edge

Numerical Investigation of Unsteady Flow and Aerodynamic Noise Characteristics of an Automotive Axial Cooling Fan

Stator modification methods for diagonal flow fans to achieve noise reduction of rotor-stator interaction

Design of sinusoidal-shaped inlet duct for acoustic mode modulation noise reduction of cooling fan

Noise Reduction Analysis of Electronic Device Cooling Fan With Duct and Its Application Under Variable Working Conditions

The Influence of the Blade Outlet Angle on the Flow Field and Pressure Pulsation in a Centrifugal Fan

AErodynamic Noise Characteristics Of Axial Flow Fan In Narrow Space And Noise Reduction Based On Flow Control

Numerical Study on the Acoustic Characteristics of an Axial Fan under Rotating Stall Condition

Effect of serrated trailing-edge blades on aerodynamic noise of an axial fan

Rotor noise in non-axial inflow conditions

Numerical investigation of the effect of blade distortion laws on the corner flow separation of the axial-flow fan

Low-Noise Design for Cross-Flow Fans. Reduction of Blade Passing Tones by Noise Source Interference.

Effect of Over-the-Rotor Liner on Fan Flutter Stability

Influence Mechanism of Ambient Air Parameters on the Rotational Stall of an Axial Fan

Parametric Design of Axial Fan for Air-Conditioning Unit in terms of Aerodynamic Performance and Noise Level

Active Subspace-Based Performance Analysis of Supersonic Through-Flow Fan Rotor