[De novo membranous glomerulonephritis after kidney transplant in a patient with amyloidosis].

N. Robles,F. G. Gómez Campderá,F. Anaya,F. Valderrábano

1989-10-21

Abstract:

What problem does this paper attempt to address?

EFFECT OF LONG CHAIN CATIONIC SURFACTANT ON ZSM-5 SYNTHESIS AND METHANOL TO OLEFIN REACTION

LIU Ye,YU Xianbo,LIAO Zuwei,WANG Jingdai,YANG Yongrong

DOI: https://doi.org/10.3969/j.issn.1001-8719.2010.05.018

2010-01-01

Abstract:A method for ZSM-5 hydrothermal preparation by adding long chain cation surfactant was investigated.The prepared ZSM-5 was characterized by means of XRD,SEM,FT-IR and N2 adsorption.The catalytic activity of the prepared ZSM-5 was evaluated by methanol to olefin reaction(MTO).The results showed that after involving CTAB in the synthesis process,an unique morphology with typical hexagonal-shaped ZSM-5 crystal composed with much smaller particles was g enerated in prepared ZSM-5,in which presented much rougher external surface and smaller crystal size compared with regular ZSM-5 zeolite.Furthermore,the prepared ZSM-5 also had larger specific surface area and more Br nsted acid sites.Addition of CTAB could greatly enhance ZSM-5 stability,resist hydrogen transfer reaction and enhance ethylene and propylene selectivies when it was used as catalyst in MTO reaction.Selectivies of propylene and ethylene were raised by 21.39% and 4.52%,respectively,compared with regular ZSM-5 zeolite.
Direct Observation Of The Mesopores In Zsm-5 Zeolites With Hierarchical Porous Structures By Laser-Hyperpolarized Xe-129 Nmr

Yong Liu,Weiping Zhang,Zhicheng Liu,Shutao Xu,Yangdong Wang,Zaiku Xie,Xiuwen Han,Xinhe Bao

DOI: https://doi.org/10.1021/jp802813x

2008-01-01

Abstract:Mesopore-modified ZSM-5 zeolites with hierarchical porous structures (Meso-ZSM-5) have been synthesized by using tetrapropylammonium hydroxide and starch as cotemplates. One- and two-dimensional Xe-129 NMR spectroscopy has been employed to study the porosity under the continuous flow of laser-hyperpolarized xenon gas. Besides the micropores, the mesoporous domains in Meso-ZSM-5 zeolites are directly observed by variable-temperature experiments. Combining with nitrogen adsorption, the influence of the Si/Al ratios on the mesopores in Meso-ZSM-5 is also investigated. The exchange of Xe atoms in different types of pores is very fast at ambient temperature. Two-dimensional exchange spectroscopy (EXSY) is used for the first time to monitor such an exchange process, and the results indicate that even at very low temperature Xe atoms still undergo much faster exchange between mesopores and micropores in Meso-ZSM-5 than in the mechanical mixture of conventional ZSM-5 and mesoporous silica. The results demonstrate that these hierarchical pores may have good connected networks that facilitate xenon diffusion and exchange. Also, this may give some indications for other molecules adsorption and diffusion in mesoporous zeolites especially in the process of catalysis.
Probing The Porosity Of Cocrystallized Mcm-49/Zsm-35 Zeolites By Hyperpolarized Xe-129 Nmr

Yong Liu,Weiping Zhang,Sujuan Xie,Longya Xu,Xiuwen Han,Xinhe Bao

DOI: https://doi.org/10.1021/jp077396m

2008-01-01

Abstract:One- and two-dimensional Xe-129 NMR spectroscopy has been employed to study the porosity of cocrystallized MCM-49/ZSM-35 zeolites under the continuous flow of hyperpolarized xenon gas. It is found by variable-temperature experiments that Xe atoms can be adsorbed in different domains of MCM-49/ZSM-35 cocrystallized zeolites and the mechanically mixed counterparts: The exchange of Xe atoms in different types of pores is very fast at ambient temperatures. Even at very low temperature two-dimensional exchange spectra (EXSY) show that Xe atoms still undergo much faster exchange between MCM-49 and ZSM-35 analogues in the cocrystallized zeolites than in the mechanical mixture. This demonstrates that the MCM-49 and ZSM-35 analogues in cocrystallized zeolites may be stacked much closer than in the physical mixture, and some parts of intergrowth may be formed due to the partially similar basic structure of MCM-49 and ZSM-35.
Structural Investigation of Interlayer-Expanded Zeolite by Hyperpolarized 129xe and 1H NMR Spectroscopy

Zhenchao Zhao,Xin Li,Shihan Li,Shutao Xu,Xinhe Bao,Yilmaz Bilge,Parvulescu Andrei-Nicolae,Muller Ulrich,Weiping Zhang

DOI: https://doi.org/10.1016/j.micromeso.2019.06.017

IF: 5.876

2019-01-01

Microporous and Mesoporous Materials

Abstract:The interlayer expanded zeolite COE-4 was synthesized using silylation agents such as dichlorodimethylsilane (DCDMS) as layer linlcer from layered silicate RUB-36 precursor. Solid-state NMR techniques combined with theoretical calculations have proven to be a useful characterization method to investigate the structure and porosity of the interlayer expanded zeolites. XRD and Si-29 MAS NMR results show that after calcination the layer spacing of COE-4 is enlarged by 2.6 angstrom compared with that of RUB-37, indicating that pore windows between the layers are enlarged from 8-membered ring (8-MR) pores to 10-MR pores due to the formation of Si(OH)(2) pillar between adjacent layers. Hyperpolarized (HP) Xe-129 NMR results indicate that after interlayer expansion, Xe atoms can be adsorbed in the 10-MR channels of COE-4, and the 10-IVIR channels are homogeneously distributed like ZSM-5. For COE-4, Xe has a stronger interaction with the channel walls containing dual silanol groups. H-1 MAS NMR combined with theoretical calculations malce a clear assignment of dual silanol groups at 3.3 ppm, and the concentration of dual silanols is 2.2 mmol/g, which is 1-2 orders of magnitude larger than the concentration of the other two types of existing isolated and hydrogen-bonded silanol groups. After introduction of pyridine-d(5), one Si-OH from the dual silanol groups has a weak hydrogen bond interaction with pyridine molecule, and the adsorbed pyridine molecule may experience chemical exchange with the other Si-OH of the dual silanol group and therefore H-1 NMR signal of dual silanol groups shows a weak broad peak at 5.7 ppm after pyridine adsorption.
Probing the Porosity of Cocrystallized MCM-49/ZSM-35 Zeolites by Hyperpolarized 129xe NMR.

Yong Liu,Weiping Zhang,Sujuan Xie,Longya Xu,Xiuwen Han,Xinhe Bao

DOI: https://doi.org/10.1021/jp077396m

2008-01-01

Abstract:One- and two-dimensional 129Xe NMR spectroscopy has been employed to study the porosity of cocrystallized MCM-49/ZSM-35 zeolites under the continuous flow of hyperpolarized xenon gas. It is found by variable-temperature experiments that Xe atoms can be adsorbed in different domains of MCM-49/ZSM-35 cocrystallized zeolites and the mechanically mixed counterparts. The exchange of Xe atoms in different types of pores is very fast at ambient temperatures. Even at very low temperature two-dimensional exchange spectra (EXSY) show that Xe atoms still undergo much faster exchange between MCM-49 and ZSM-35 analogues in the cocrystallized zeolites than in the mechanical mixture. This demonstrates that the MCM-49 and ZSM-35 analogues in cocrystallized zeolites may be stacked much closer than in the physical mixture, and some parts of intergrowth may be formed due to the partially similar basic structure of MCM-49 and ZSM-35.
Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite

Qing Liu,Pingping He,Xingchi Qian,Zhaoyang Fei,Zhuxiu Zhang,Xian Chen,Jihai Tang,Mifen Cui,Xu Qiao,Yao Shi

DOI: https://doi.org/10.1021/acs.energyfuels.7b02543

IF: 4.6541

2017-01-01

Energy & Fuels

Abstract:Hierarchical porous ZSM-5 (HP-ZSM-5) was constructed using organosilanes as the growth inhibitors for CO2 capture. The properties of adsorbents were characterized by X-ray diffraction, N-2 adsorption/desorption, scanning electron microscopy, temperature-programmed desorption of carbon dioxide, and Al-27 magic angle spinning nuclear magnetic resonance. It was found that HP-ZSM-5 samples synthesized by organosilanes had a significant effect on the microstructure and morphology. CO, adsorption capacity of HP-ZSM-5 was up to 58.26 cm(3) g(-1) at 0 degrees C and 1 bar, significantly higher than that of the ZSM-5 sample. The effective improvement of CO2 adsorption performance mainly originated from the micro-/mesoporous composite structure and complex surface morphology, which can provide low -resistant pathways for CO2 through the porous network. Besides, in situ Fourier transform infrared spectroscopy was carried out to study the adsorption process on adsorbents, and the results indicated that a faster physical adsorption process was achieved as a result of the introduction of mesopores.
Properties of multiple Lewis acid sites in alkali metal-exchanged chabazites probed by CO adsorption.

Jakub Halamek,Roman Bulánek,Miroslav Rubeš,Ota Bludský

DOI: https://doi.org/10.1016/j.micromeso.2024.113152

IF: 5.876

2024-04-24

Microporous and Mesoporous Materials

Abstract:Carbon monoxide adsorption on alkali-metal exchanged chabazites (M- CHA , where M=Li, Na, K) was investigated across various Si/Al ratios. The study reveals significant insights into the adsorption behavior, including the persistence of cationic preferences with decreasing Si/Al ratios and the existence of multiple-center interactions involving alkali-metal cations and CO. Results show that for high-silica M- CHA zeolites, CO adsorption is effectively described by single and dual adsorption site models, with cation preferences varying by type. In low-silica zeolites, cation positions are primarily influenced by the aluminum distribution and Coulombic interactions. However, the propensity for single-site cation positions (Si/Al→∞) is preserved to a certain degree. The most noticeable example is the small difference between SIII' occupancies (cations in 8-membered ring windows) in Na- CHA -2 and K- CHA -2 (0.80 vs. 0.85) that strongly influences the rate of diffusion of CO in the M- CHA -2 samples. While FT-IR spectra of high-silica zeolites can be accurately described using cation site stabilities, interaction energies, and CO stretching frequencies, predicting spectra of low-silica chabazites requires a statistical approach and/or molecular dynamics simulations at the DFT level. The findings demonstrate that the dynamical behavior of adsorbates changes dramatically between different alkali metal-exchanged chabazites, highlighting the complex nature of CO adsorption at multiple Lewis acid sites.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
Adsorption of carbon monoxide on Ag(I)-ZSM-5 zeolite: An ab initio density functional theory study

ZhenZhen Qiu,Yangxin Yu,JianGuo Mi

DOI: https://doi.org/10.1016/j.apsusc.2012.05.162

IF: 6.7

2012-01-01

Applied Surface Science

Abstract:Adsorption of carbon monoxide on different Ag+-exchange sites of Ag–ZSM-5 zeolite has been investigated using density functional theory. The coordination and local geometry of the Ag+ ion in Ag–ZSM-5 as well as adsorption structures and energies of CO adsorbed on these sites are explored extensively. The structure of Ag+-exchange sites, location of the Al atom on the T site, and number of the Al atoms contained in the sites are considered in the theoretical calculations. The calculated results show that the AgO coordination number of two is strongly preferred before and after CO adsorption. The AgO bond lengths are in a broad range of 2.2–2.9Å, and the AgC bond lengths for CO adsorbed on Ag–ZSM-5 zeolite are calculated to be 2.0–2.2Å. Both AgO and AgC bond lengths for CO–Ag–ZSM-5 complex are longer than those for CO–Cu–ZSM-5 complex. The calculated adsorption energy of CO adsorbed on the I2 sites is between 28.5 and 29.6kcal/mol, and that on the Z5, Z6, M5 and M6 sites containing one Al atom on the T position is between 11.3 and 18.9kcal/mol whereas the calculated adsorption energy of CO adsorbed on the M7 site containing one Al atom is 19.9kcal/mol. The introduction of the two Al atoms to the Ag+-exchange site results in a reduction of CO adsorption energy. In general, the adsorption energy of CO on Ag–ZSM-5 is lower than that on Cu–ZSM-5. The predicted coordination of the Ag+ ion, bond lengths of AgO and AgC as well as adsorption energy are in accord with available experimental results.
Enhancement of Carbon Dioxide Adsorption Over Alkali-cations Borosilicate ZSM-5 Zeolite

Nadjat Chouat,Boumediéne Bensafi,Fatiha Djafri

DOI: https://doi.org/10.1007/s12633-021-01563-w

IF: 3.4

2022-01-07

Silicon

Abstract:Varying ZSM-5 zeolites with various chemical compositions have been synthesized using a hydrothermal method. The samples were characterized using XRD, FTIR, TG, BET, and SEM. Significant amounts of CO2 have been sorbed under normal temperature and pressure conditions, especially in the case of the high boron content ZSM-5. The consequences of different parameters have been carefully researched and addressed. Increased CO2 adsorption capability in K-ZB-30 > Cs-ZB-30 > Na-ZB-30 > Na-ZB-50 > Na-ZA-50 > Na-ZB-70. The Langmuir and Freundlich models were studied to characterize CO2 interaction types and saturation processes, and a satisfactory agreement with experimental data was observed.

materials science, multidisciplinary,chemistry, physical
Preparation of ZSM-5 molecular sieve modified by kaolin and its CO2 adsorption performance investigation

Qinghua Liu,Yaping Fang,Conghui Miao,Zhengkun Liao,Jingshan Lu,Jiangyuan Li,Xianglian Wu,Aisha Nulahong

DOI: https://doi.org/10.1016/j.micromeso.2023.112678

IF: 5.876

2023-10-01

Microporous and Mesoporous Materials

Abstract:The ZSM-5 molecular sieve was prepared by the crystal species-assisted hydrothermal synthesis method using kaolin as raw material, and the molecular sieve were prepared by monometallic Na, Ni and bimetallic Ni–Na modification of the molecular sieve when using the isovolumetric impregnation method. It was found that the modified molecular sieve maintained the MFI structure of ZSM-5 molecular sieve, some mesopores appeared, and Na and Ni were uniformly dispersed on the inner and outer surfaces of the carrier by using XRD, ICP, FI-IR,UV–vis and BET. Moreover the presence of Na could increase the loading of metallic Ni. The effect of the modified molecular sieve on the CO2 adsorption performance was investigated using CO2 programmed temperature rise desorption (CO2-TPD). Na and Ni modification can increase the number of adsorption centers and improve the activity of adsorption centers on the surface of the adsorbent. Then Ni as an additive can enhance the interaction between metal and carrier, increase the density of active sites on the molecular sieve surface, and improve the adsorption performance on CO2. Among them, 1.5 Ni-0.6 Na/ZSM-5 adsorption has the better performance for CO2 adsorption with the bettert adsorption capacity of 1.97 mmol/g, which is 74% higher than ZSM-5, 84% higher than 2 Ni/ZSM-5, and 25% higher than 0.6 Na/ZSM-5.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
Adsorbate-induced Active Site in Zeolite

Guangchao Li,Christopher Foo,Xianfeng Yi,Wei Chen,Pu Zhao,Pan Gao,Tatchamapan Yoskamtorn,Yao Xiao,Sarah Day,Chiu Tang,Guangjin Hou,Anmin Zheng,Shik Chi Tsang

DOI: https://doi.org/10.21203/rs.3.rs-105067/v1

2020-01-01

Abstract:Abstract There has been a long debate on how and where active sites are created for molecular adsorption and catalysis in zeolites which underpin many important industrial applications. For example, Lewis acidic site (LAS) and basic site (LBS) are generally believed to be the extra-framework Al species and residue anion (OH−) species formed at fixed crystallographic positions on the zeolite structures after their synthesis. Here, direct experimental observation of adsorbate-induced active sites in silicoaluminophosphate (SAPO) zeolites is for the first time made, which contradicts the traditional view of the fixed active sites in zeolites. Evidence shows that induced Frustrated Lewis pair (three-coordinated framework Al as LAS and SiO(H) as LBS) can be transiently favored for heterolytic molecular binding/reactions of competitive polar adsorbates due to their ineffective orbitals overlap in the rigid framework. High resolution magic-angle spinning solid-state nuclear magnetic resonance (MAS-SSNMR), synchrotron X-ray diffraction (SXRD), neutron powder diffraction (NPD), in-situ Diffuse Reflectance Infrared Fourier Transform spectroscopy (in-situ DRIFT) and ab initio molecular dynamic (AIMD) demonstrate the presence of only one type of Bronsted acid site (BAS) in the H-SAPO-34, however, when exposed to polar adsorbates such as methanol, the methoxy moiety is shown to be directly coordinated to the framework Al (induced LAS) and the proton to the O(H)-Si (induced LBS) by the induced FLP. Our unprecedented finding opens up a new avenue to understanding of the dynamic establishment of active sites for adsorption or chemical reactions under molecular bombardments to zeolitic structures.
Peripheral Vascular Effect of Cortisone in Rheumatoid Arthritis, Scleroderma, and other Related Conditions

B. Catchpole,R. Jepson,J. Kellgren

DOI: https://doi.org/10.1136/ard.13.4.302

IF: 27.973

1954-12-01

Annals of the Rheumatic Diseases

Abstract:Many systemic diseases including rheumatoid arthritis are frequently associated with a diminution or redistribution of peripheral blood flow. This may be due to an organic arterial narrowing or occlusion or, alternatively, to a high resting tone in the peripheral vessels which may still be capable under certain conditions of relaxing to a normal calibre. Thus the vasodilatation in the fingers which normally follows heating of the trunk and legs was shown by Vulliamy (1952) to be absent in ten out of eleven cases of pink disease. Clinical recovery was associated with a return of this vasodilator response. A similar vasomotor defect was demonstrated by Woodmansey (1951) in cases of rheumatoid arthritis. Beattie and Woodmansey (1953) later showed that peripheral vasodilator response to heating in such cases could frequently be increased by an intravenous infusion of ACTH. Hines (1950) reported similar findings in three patients with acrosclerosis treated by cortisone. The study reported in this paper concerns patients suffering from rheumatoid arthritis and other chronic systemic diseases in whom the fingers appeared cold and cyanosed with Raynaud's phenomenon or acrocyanosis on exposure to cold. In some patients nutritional lesions such as pulp
Density functional theory calculations on various M/ZSM-5 zeolites: Interaction with probe molecule H2O and relative hydrothermal stability predicted by binding energies

Gang Yang,Yan Wang,Danhong Zhou,Xianchun Liu,Xiuwen Han,Xinhe Bao

DOI: https://doi.org/10.1016/j.molcata.2005.04.063

2005-01-01

Abstract:Density functional calculations were carried out on a series of metal-exchanged and H-form ZSM-5 zeolite clusters with or without H2O molecules adsorbed. By comparing the H2O adsorption on H-form and metal exchanged ZSM-5 zeolite clusters, the model for H2O adsorption on M/ZSM-5 zeolites was put forward, confirmed by the consistency of our frequency calculations with previous IR experiments. The binding energies of the metal cations, which decreased as La/ZSM-5>Ca/ZSM-5>Mg/ZSM-5>K/ZSM-5>Rb/ZSM-5>Na/ZSM-5>Zn/ZSM-5 (>H/ZSM-5), determined the relative hydrothermal stabilities of different metal exchanged ZSM-5 zeolites. Detailed analysis on the three parts to the binding energies was performed, concluding that the part between the metal cations and the zeolite framework has played the most important role, which can be reflected by the consistency of the sequences of the elongated of MOf distances and the binding energies. Here the mean square deviation Θ was adopted to characterize the [AlO4]− tetrahedron, which showed that the process of H or M falling off was facilitated at higher water pressure. When the Brϕnsted acidic proton was exchanged with the metal cations or adsorbed with some water, the [AlO4]− tetrahedron can restore somewhat towards ideal regularity, and this is probably the reason why 27Al MAS NMR signals are illegible in H/ZSM-5 zeolite and will be much improved by the introduction of some water or the exchange with metal cations.
MOLECULAR SIMULATION OF CHARACTERISTICS FOR WATER ADSORPTION ON ZSM-5 TYPE ZEOLITE DOPED BY LITHIUM ION

HU Yukun,DING Jing,PENG Xiaofeng,YANG Jianping,WANG Weilong

DOI: https://doi.org/10.3321/j.issn:0454-5648.2007.09.022

2007-01-01

Abstract:The grand canonical assemblage Monte Carlo (GCMC) method was used to calculate the adsorption heat of HZSM–5 zeo- lite. The results are in good agreement with the experimental data reported in the literature. Then the adsorption isotherms of water by Li+ exchanged ZSM–5 zeolite were simulated. Based on these facts, adsorption of water on LinZSM–5 zeolite with various molar ratios n(Si)/n(Al) is predicted. The simulation results indicate that the n(Si)/n(Al) ratio of the zeolite framework greatly affects the water adsorption and adsorption isotherms. The adsorption amount decreases as the n(Si)/n(Al) ratio increases, and the free volume is even greater. The adsorbed water molecules are located around Li cations and Al atoms on the zeolite framework and a main sorption site for water in LinZSM–5 zeolite. The ZSM–5 zeolite modified by Li cations can decrease the isosteric heat effectively. At the same loading, the adsorption heat decreases as the n(Si)/n(Al) ratio increases.
The Effect of Adsorbed Molecule Gas-Phase Deprotonation Enthalpy on Ion Exchange in Sodium Exchanged Zeolites: an in Situ FTIR Investigation

Brian Murphy,Mark E. Davis,Bingjun Xu

DOI: https://doi.org/10.1007/s11244-015-0383-z

IF: 2.781

2015-01-01

Topics in Catalysis

Abstract:Molecular-level understanding of the interactions between reactants and the surface of solid catalysts is of importance to the rational design of catalysts. Here, in situ transmission Fourier transform infrared spectroscopy is employed to investigate the ion exchange between the acidic hydrogen in organic molecules that have been adsorbed from the gas phase and sodium cations in zeolites. Organic compounds with functional groups common among key biomass-derived compounds are used as probe molecules. We demonstrate that ion exchange between acidic hydrogen in organic molecules and the sodium cations in zeolites with the FAU topology produces Brønsted acid sites and the corresponding adsorbed salt species by identifying signature spectroscopic bands. Furthermore, the gas-phase deprotonation enthalpy (GPDE) of the organic compounds is identified as a key descriptor in determining the feasibility and extent of the exchange process. Molecules with GPDE below 1462 kJ/mol, e.g., m-cresol (1462 kJ/mol), propanoic acid (1454), acetic acid (1457), acrylic acid (1440) and trifluoroacetic acid (1357), show clear vibrational bands for Brønsted acid sites and the corresponding sodium salts, while molecules with higher GPDE, such as trifluoroethanol (1513), ethanol (1586), and water (1622) do not. These data indicate that the degree of dissociation of the acidic hydrogen is a key element in the ion exchange. The generality of this process in zeolites is established by the observation of similar results on zeolites with differing topologies (FAU, MFI, *BEA, and MOR).
Molecular Simulation of Adsorption of CO2 from a Combustion Exhaust Mixture of Zeolites with Different Topological Structures

Shiqing Wang,Xu Jiang,Yutong Wang,Jiaxin Liu,Xiaolong Qiu,Lianbo Liu,Shiwang Gao,Xiong Yang,Jing Ma,Chuanzhao Zhang

DOI: https://doi.org/10.3390/pr12122730

IF: 3.5

2024-12-03

Processes

Abstract:In this work, a molecular simulation method was used to study the adsorption of seven combustion products (CO2, H2O, SO2, N2, O2, NO and NO2) on three zeolites with different topological structures (4A, MIF and MOR). Adsorption isotherms of pure components and mixtures at a wide range of temperatures (253–333 K) were calculated using the Monte Carlo method, obtaining equilibrium parameters including the adsorption capacity, adsorption heat and energy distribution. The calculation results indicated that 4A zeolite with more micropores has a stronger adsorption performance for CO2. The presence of water significantly reduced the CO2 capture efficiency of the three zeolites, and the CO2 adsorption amount decreased by more than 80%. Adsorption kinetics was studied using the molecular dynamic (MD) method, MFI and MOR, with channel-type pore structures exhibiting stronger gas diffusion performance, though their separation efficiency was not high. A 4A zeolite has the potential for kinetic separation of CO2.

engineering, chemical
Adsorption of SO2 over Alkali Metal Ion-exchanged ZSM-5 zeolites.

Ichiro Sawayama,S. Ozawa,M. Katoh,T. Yamazaki

DOI: https://doi.org/10.1246/NIKKASHI.1995.177

Abstract:Adsorption behavior of SO2 on alkali metal (Li+, Na+, K+, Cs+) ion-exchanged ZSM-5 zeolites has been studied as a function of temperature (273 594 K) and pressure (0.7 66.5 kPa). The adsorption states have been characterized by IR, XPS, and XRF techniques. The theoretical calculation of the adsorption interactions was performed based on a simple isolated cation model. The isosteric heat of adsorption evaluated by Clausius-Clapeyron eq uation on alkali metal ion-exchanged ZSM-5 extended up to 76 kJ/mol, and it was larger than that on silicalite (ca.30 kJ/mol), indicating the strong interaction between the alkali metal cations and SO2. The theoretical calculation has revealed that there might be two types of SO2 adsorbates as physisorbed species on a cation. Each was mainly stabilized by the dipole interaction, or the quadrupole interaction. The observed IR spectra for adsorbed SO2 could indeed deconvoluted into two components, showing the existence of two kinds of ad sorbed SO2. Some irreversible adsorption of SO2 was observed within the adsorption conditions adapted in this study. Comparison of results between the volumetric and the spectroscopic measurement of irreversible adsorption (ca.20 and 0.2 mlNTP/g, respectively) suggested that a small amount of strongly adsorbed species (or ad-species containing sulfur) created some closed space in the zeolite pore structure.

Chemistry,Materials Science
Bridging adsorption analytics and catalytic kinetics for metal-exchanged zeolites

Pengfei Xie,Tiancheng Pu,Gregory Aranovich,Jiawei Guo,Marc Donohue,Ambarish Kulkarni,Chao Wang

DOI: https://doi.org/10.1038/s41929-020-00555-0

IF: 37.8

2021-02-01

Nature Catalysis

Abstract:Metal-exchanged zeolites have been widely used in industrial catalysis and separation, but fundamental understanding of their structure–property relationships has remained challenging, largely due to the lack of quantitative information concerning the atomic structures and reaction-relevant adsorption properties of the embedded metal active sites. Here, we report on using low-temperature reactive adsorption of NO to titrate copper-exchanged ZSM5 (Cu-ZSM5). Quantitative descriptors of the atomic structures and adsorption properties of Cu-ZSM5 are established by combining atomistic simulation, density functional theory c, operando molecular spectroscopy, chemisorption and titration measurements. These descriptors are then applied to interpret the catalytic performance of Cu-ZSM5 for NO decomposition. Linear correlations are established to bridge low-temperature adsorption analytics and high-temperature reaction kinetics, which are demonstrated to be generally applicable for understanding the structure–property relationships of metal-exchanged zeolites and foregrounded the development of advanced catalytic materials.

chemistry, physical
Experimental Evidence for the Relationship between Al Site Distribution and Catalytic Performance in Methanol-to-Olefins Reaction over ZSM-5 Zeolite

Jing Ma,Kai Hidaka,Masaru Ogura,Takahiko Moteki

DOI: https://doi.org/10.1021/acs.cgd.3c00212

IF: 4.01

2023-11-16

Crystal Growth & Design

Abstract:The designed synthesis of zeolite catalysts, especially in the control of the framework structure and heteroatom distribution, offers advantages to their catalytic performance. In the methanol-to-olefins reaction, the shape of intermediate species defined by the reaction space surrounding an acid site impacts the reaction mechanism and, in turn, the product selectivity. However, because of the difficulty in observing the active intermediate species, presenting a clear relationship between the catalytic site (i.e., Al atom) distribution and the catalytic property is challenging. Herein, we experimentally demonstrate a structure–catalytic performance relationship between the Al distribution in the ZSM-5 zeolite and the behavior of the methanol-to-olefins reaction, particularly in regard to propylene formation, by isotopic labeling experiments. Two ZSM-5 zeolite samples, which were synthesized with different organic structure-directing agents, were shown to possess different Al distributions based on constraint index measurements. Although their catalytic properties in the methanol-to-olefins reaction in terms of conversion and selectivity were almost identical, the transient responses of the insertion of 13C into propylene fragments showed contrasting results. The results successfully revealed via an experimental approach the relationship between the zeolite design and the catalytic performance.

chemistry, multidisciplinary,materials science,crystallography
Comparison of outcome after valve replacement with a bioprosthesis versus a mechanical prosthesis: initial 5 year results of a randomized trial.

K. Hammermeister,William G. Henderson,Cecil Burchfiel,Gulshan K. Sethi,J. Souchek,C. Oprian,Alan B. Cantor,E. Folland,Shukri F. Khuri,S. Rahimtoola

DOI: https://doi.org/10.1016/S0735-1097(87)80263-2

IF: 24

1987-10-01

Journal of the American College of Cardiology

Abstract:

[De novo membranous glomerulonephritis after kidney transplant in a patient with amyloidosis].

EFFECT OF LONG CHAIN CATIONIC SURFACTANT ON ZSM-5 SYNTHESIS AND METHANOL TO OLEFIN REACTION

Direct Observation Of The Mesopores In Zsm-5 Zeolites With Hierarchical Porous Structures By Laser-Hyperpolarized Xe-129 Nmr

Probing The Porosity Of Cocrystallized Mcm-49/Zsm-35 Zeolites By Hyperpolarized Xe-129 Nmr

Structural Investigation of Interlayer-Expanded Zeolite by Hyperpolarized 129xe and 1H NMR Spectroscopy

Probing the Porosity of Cocrystallized MCM-49/ZSM-35 Zeolites by Hyperpolarized 129xe NMR.

Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite

Properties of multiple Lewis acid sites in alkali metal-exchanged chabazites probed by CO adsorption.

Adsorption of carbon monoxide on Ag(I)-ZSM-5 zeolite: An ab initio density functional theory study

Enhancement of Carbon Dioxide Adsorption Over Alkali-cations Borosilicate ZSM-5 Zeolite

Preparation of ZSM-5 molecular sieve modified by kaolin and its CO2 adsorption performance investigation

Adsorbate-induced Active Site in Zeolite

Peripheral Vascular Effect of Cortisone in Rheumatoid Arthritis, Scleroderma, and other Related Conditions

Density functional theory calculations on various M/ZSM-5 zeolites: Interaction with probe molecule H2O and relative hydrothermal stability predicted by binding energies

MOLECULAR SIMULATION OF CHARACTERISTICS FOR WATER ADSORPTION ON ZSM-5 TYPE ZEOLITE DOPED BY LITHIUM ION

The Effect of Adsorbed Molecule Gas-Phase Deprotonation Enthalpy on Ion Exchange in Sodium Exchanged Zeolites: an in Situ FTIR Investigation

Molecular Simulation of Adsorption of CO2 from a Combustion Exhaust Mixture of Zeolites with Different Topological Structures

Adsorption of SO2 over Alkali Metal Ion-exchanged ZSM-5 zeolites.

Bridging adsorption analytics and catalytic kinetics for metal-exchanged zeolites

Experimental Evidence for the Relationship between Al Site Distribution and Catalytic Performance in Methanol-to-Olefins Reaction over ZSM-5 Zeolite

Comparison of outcome after valve replacement with a bioprosthesis versus a mechanical prosthesis: initial 5 year results of a randomized trial.