Abstract:Oxygen tension plays an important role in overall cell function and fate, regulating gene expression, and cell differentiation. Although there is extensive literature available that supports the previous statement, little information is to be found about accurate O2 measurements during culture. In fact, O2 concentration at the cell layer during culture is commonly assumed to be equal to that of the incubator atmosphere. This assumption does not consider oxygen diffusion properties, cell type, cell density, media composition, time in culture nor height of the cell culture medium column. In this study, we developed a non-invasive, optical sensor foil-based technique suitable for measuring the 3D oxygen gradient that is formed during cell culture as a result of normal cell respiration. For this propose, we created a 3D printed ramp to which surface an oxygen optode sensor foil was attached. The ramps were positioned inside the culture wells of 24 well plate prior cell seeding. This set up in conjunction with the VisiSens TD camera system allows to investigate the oxygen gradient formation during culture. Cultivation was performed with three different initial cell densities of the cell line A549 that were seeded on the plate containing the ramps with the oxygen sensors. The O2 gradient obtained after 96 h of culture showed significantly lower O2 concentrations closer to the bottom of the well in high cell density cultures compared to that of lower cell density cultures. Furthermore, it was very interesting to observe that even with low cell density culture, oxygen concentration near the cell layer was lower than that of the incubator atmosphere. The obtained oxygen gradient after 96 h was used to calculate the oxygen consumption rate (OCR) of the A549 cells, and the obtained value of ~100 fmol/h/cell matches the OCR value already reported in the literature for this cell line. Moreover, we found our set up to be unique in its ability to measure oxygen gradient formation in several wells of a cell culture plate simultaneously and in a non-invasive manner.

Fluorescent microparticles for sensing cell microenvironment oxygen levels within 3D scaffolds

3D Inverted Opal Hydrogel Scaffolds with Oxygen Sensing Capability.

Facile One Pot Synthesis of Hybrid Core-Shell Silica-Based Sensors for Live Imaging of Dissolved Oxygen and Hypoxia Mapping in 3D Cell Models

A Highly Sensitive and Flexible Photonic Crystal Oxygen Sensor

MEMS Device to Monitor Biological Oxygen Uptake at Arrays of Single Cells and Small Cell Clusters

Rapid Time-Lapse 3D Oxygen Tension Measurement within Hydrogels Using Widefield Frequency Domain Fluorescence Lifetime Imaging Microscopy (FD-FLIM) and Image Segmentation

Every Breath You Take: Non-invasive Real-Time Oxygen Biosensing in Two- and Three-Dimensional Microfluidic Cell Models

Highly sensitive ratiometric fluorescent fiber matrices for oxygen sensing with micrometer spatial resolution

Highly Sensitive Ratiometric Fluorescent Fiber Matrixes for Oxygen Sensing with Micrometer-Spatial Resolution

Micro/nano particle-based oxygen sensing film for monitoring respiration of cells cultured in a microfluidic device

Real-time measurements of dissolved oxygen inside live cells by organically modified silicate fluorescent nanosensors

A New Non-invasive Technique for Measuring 3D-Oxygen Gradients in Wells During Mammalian Cell Culture

Nonwoven fiber meshes for oxygen sensing

Fluorescence-Based Nano-Oxygen Particles for Spatiometric Monitoring of Cell Physiological Conditions.

Characterization of Single-Spheroid Oxygen Consumption Using a Microfluidic Platform and Fluorescence Lifetime Imaging Microscopy

Hydrogel-Based Fluorescent Dual pH and Oxygen Sensors Loaded in 96-Well Plates for High-Throughput Cell Metabolism Studies

Dissolved Oxygen Sensing Using Organometallic Dyes Deposited Within a Microfluidic Environment

Organosilica Nanosensors for Monitoring Spatiotemporal Changes in Oxygen Levels in Bacterial Cultures

A Pyrene@Micelle Sensor for Fluorescent Oxygen Sensing.

In-situ monitoring of cellular H2O2 within 3D cell clusters using conductive scaffolds