Abstract:Especially in the electric vehicle industry where both high energy density and long lifetime batteries are sought, Ni-based cathode materials such as LiNi 1−x−y Mn x Co y O 2 (NMC) and LiNi 1−x−y Co x Al y O 2 (NCA) provide a fitting compromise in capacity and cyclability. In recent years, the high cost of cobalt in addition to the problematic geopolitics surrounding cobalt mining have motivated research efforts toward cobalt-free cathode materials. 1 However, Ni-rich materials are subject to inevitable failure mechanisms such as microcracking and parasitic reactions with the electrolyte which are further aggravated with an increase in Ni-content and in the absence of Co. 2 Many strategies have been proposed to overcome these challenges such as doping and/or coating the cathode particles, 3 but there remains a need to further increase energy density with minimal compromise to lifetime. In this work we present a cathode active material system designed to push Ni-rich and Co-free materials to the limit of their performance. This is done by choosing optimal polycrystalline particle size, a balance of Mn and Al content, and a sufficient amount of high-valence doping. Additionally, appropriate synthesis conditions are needed to obtain the desired morphology and infuse the intergranular boundaries with the W dopant. It is then important to choose an appropriate upper cutoff voltage during cycling to maximize energy while avoiding drastic crystal changes. 4 This optimized NMA-W material system delivers specific capacity above 200 mAh/g while retaining 95% of its capacity without relying on any amount of Co. The series of NMA-W materials presented in this work were characterized and tested. Scanning electron microscopy (SEM) images were used to observe morphology and crystallite growth after synthesis. X-ray diffraction (XRD) analysis was conducted to monitor the crystal parameters and accelerated rate calorimetry (ARC) was used to assess the thermal stability and safety of the material. Compression tests were also conducted to study the strength of the particles and their propensity to crack under stress. Choi, J. U., Voronina, N., Sun, Y. K. & Myung, S. T. Recent Progress and Perspective of Advanced High-Energy Co-Less Ni-Rich Cathodes for Li-Ion Batteries: Yesterday, Today, and Tomorrow. Adv. Energy Mater. 10 , 1–31 (2020). Li, H. et al. An Unavoidable Challenge for Ni-Rich Positive Electrode Materials for Lithium-Ion Batteries. (2019) doi:10.1021/acs.chemmater.9b02372. Yan, W., Yang, S., Huang, Y., Yang, Y. & Guohui Yuan. A review on doping/coating of nickel-rich cathode materials for lithium-ion batteries. J. Alloys Compd. 819 , 153048 (2020). Nam, G. W. et al. Capacity Fading of Ni-Rich NCA Cathodes: Effect of Microcracking Extent. ACS Energy Lett. 4 , 2995–3001 (2019).

Ni-Rich Layered Cathodes for Lithium-Ion Batteries: From Challenges to the Future

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Microstructures of layered Ni-rich cathodes for lithium-ion batteries

Structures, issues, and optimization strategies of Ni-rich and Co-low cathode materials for lithium-ion battery

A review of nickel-rich layered oxide cathodes: synthetic strategies, structural characteristics, failure mechanism, improvement approaches and prospects

Understanding Ni-Rich Layered Cathode Materials for Fast-Charging Li-Ion Batteries

Challenges and Strategies to Advance High‐Energy Nickel‐Rich Layered Lithium Transition Metal Oxide Cathodes for Harsh Operation

Advancements and Challenges in High-Capacity Ni-Rich Cathode Materials for Lithium-Ion Batteries

Ni‐rich cathode materials for high‐perform ance Li‐ion batteries: challenges, progress and perspectives

Critical review on the degradation mechanisms and recent progress of Ni-rich layered oxide cathodes for lithium-ion batteries

Nickel-rich layered oxide cathodes for lithium-ion batteries: Failure mechanisms and modification strategies

Challenges and Modification Strategies of Ni-Rich Cathode Materials Operating at High-Voltage

Low-cobalt active cathode materials for high-performance lithium-ion battery: Synthesis and performance enhancement methods

A Review of Degradation Mechanisms and Recent Achievements for Ni‐Rich Cathode‐Based Li‐Ion Batteries

Research Progress on the Failure Mechanisms and Modifications of Ni-Rich Ternary Layered Oxide Cathode Materials for Lithium-Ion Batteries

Co-free/Co-poor high-Ni cathode for high energy, stable and low-cost lithium-ion batteries

Pushing the Energy-Lifetime Frontier of Li-Ion Batteries with Optimized Ni-Rich, Co-Free NMA-W Cathodes

Developments in Surface/Interface Engineering of Ni‐Rich Layered Cathode Materials

Ni-RICH lithium nickel manganese cobalt oxide cathode materials: A review on the synthesis methods and their electrochemical performances

Safety Issues and Improvement Measures of Ni-Rich Layered Oxide Cathode Materials for Li-Ion Batteries

High Nickel and No Cobalt─The Pursuit of Next-Generation Layered Oxide Cathodes.