Abstract:To obtain channel information for further data transmission, the blind channel estimation needs no pilot signal in advance is a considerable algorithm. To improve performance of the blind channel estimation schemes, we have employed the channel estimation with pilot signals by adjacent users; the acquired estimation channel information of the adjacent channel is applied as an initial state to the blind channel estimation of the target user. We have considered the subspace blind channel estimation scheme in this study. The estimated adjacent channel information is supported as an initial state of the auto-correlation matrix in the subspace estimation method, thereby providing information to reduce the channel estimation error. From our simulation study, we have found that, when the correlation between two nearby channels is high, the forgetting factor in the subspace estimation method can be increased, so that the weight of the initial state of the matrix is increased, and a more accurate channel state is estimated. If the correlation coefficient is lowered in two adjacent channels, the forgetting factor can be appropriately adjusted to rise the weight of the direct received signal from the objective channel to avoid errors increased.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is how to improve the performance of blind channel estimation in wireless communication by using the estimated information of adjacent channels. Specifically, the blind channel estimation algorithm does not need to transmit pilot signals in advance, which can save bandwidth resources, but the accuracy of its initial state has a great impact on the estimation results. The paper proposes a method, that is, using the channel estimation information with pilot signals of adjacent users as the initial state of the blind channel estimation of the target user, thereby improving the accuracy of blind channel estimation.
### Main problems
1. **Initial state problem of blind channel estimation**: The blind channel estimation algorithm performs channel estimation without prior knowledge, so the selection of the initial state is crucial for the accuracy of the final estimation result.
2. **Utilization of adjacent channel information**: How to effectively use the estimated information of adjacent channels to improve the blind estimation performance of the target channel.
3. **Influence of correlation coefficient**: When the correlation coefficient between two adjacent channels is high, how to adjust the forgetting factor to improve the estimation accuracy; when the correlation coefficient is low, how to avoid the increase of estimation error.
### Solutions
The paper proposes a blind channel estimation algorithm combined with the subspace method, which is implemented through the following steps:
1. **Adjacent channel estimation**: First, use the adjacent channels with pilot signals to perform channel estimation and obtain the information of adjacent channels.
2. **Initial state setting**: Use the estimated information of adjacent channels as the initial state of the blind channel estimation of the target channel.
3. **Forgetting factor adjustment**: Dynamically adjust the forgetting factor according to the correlation coefficient between adjacent channels. When the correlation coefficient is high, increase the forgetting factor to increase the weight of the initial state; when the correlation coefficient is low, appropriately reduce the forgetting factor to reduce the influence of unreliable information.
### Experimental results
Through simulation research, the paper finds that:
- When the correlation coefficient between two adjacent channels is high, the forgetting factor can be increased, thereby improving the estimation accuracy.
- When the correlation coefficient is low, appropriately adjusting the forgetting factor can reduce the estimation error and avoid high bit error rate (BER).
### Conclusions
This research effectively improves the performance of blind channel estimation by using the estimated information of adjacent channels, especially when the correlation coefficient is high. This method provides a new solution for channel estimation in wireless communication systems and helps to improve the reliability and efficiency of data transmission.