Electro-Optically Tunable Universal Metasurfaces

Ghazaleh Kafaie Shirmanesh,Ruzan Sokhoyan,Pin Chieh Wu,Harry A. Atwater

DOI: https://doi.org/10.48550/arXiv.1910.02069

2019-10-05

Abstract:Molding the flow of light at the nanoscale has been a grand challenge of nanophotonics for decades. It is now widely recognized that metasurfaces represent a chip-scale nanophotonics array technology capable of comprehensively controlling the wavefront of light via appropriately configuring subwavelength antenna elements. Here, we demonstrate a reconfigurable metasurface that is universal, i.e., notionally capable of providing diverse optical functions in the telecommunication wavelength regime, using a compact, lightweight, electronically-controlled array with no moving parts. By electro-optical control of the phase of the scattered light from identical individual metasurface elements, we demonstrate a single prototype universal programmable metasurface that is capable of both dynamic beam steering and reconfigurable light focusing using one single device. Reconfigurable universal metasurfaces with arrays of tunable optical antennas thus can perform arbitrary optical functions by programmable array-level control of scattered light phase, amplitude, and polarization, similar to dynamic and programmable memories in electronics.

Optics,Applied Physics

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a general - purpose tunable metasurface capable of achieving multiple optical functions. Specifically, the authors designed and demonstrated an electrically - tunable general - purpose metasurface operating in the near - infrared wavelength range. This metasurface can independently adjust the phase of each metasurface unit through electronic control, thereby achieving functions such as dynamic beam steering and reconfigurable focusing. This technological advancement can significantly reduce the volume and weight of optical devices while improving their performance and versatility, opening up new possibilities for the development of integrated photonics.

The key challenges mentioned in the paper include:
1. **High - precision phase modulation**: In order to achieve the above - mentioned functions, precise control of the phase of scattered light is required. The authors achieved this by using a transparent conductive oxide (such as indium tin oxide, ITO) as the active region and utilizing the field - effect - induced refractive index change.
2. **Multifunctional integration**: Traditional metasurfaces are usually designed for specific applications, while the metasurface proposed in this paper can achieve multiple different optical functions, such as beam steering and focusing, on the same device, which greatly improves the flexibility and application range of the device.
3. **High - speed modulation**: The electrical modulation scheme requires not only a wide phase modulation range but also a fast modulation speed to meet the requirements in practical applications. The paper demonstrated the rapid phase change achieved by electrical modulation, proving the feasibility of this scheme.

Through these innovations, the authors hope to promote further development in the field of photonics, especially in areas such as light detection and ranging (LiDAR), optical interconnection, and optical communication, providing more compact, efficient, and multifunctional solutions.