Plant cells-based biological matrix composites

Eleftheria Roumeli,Luca Bonanomi,Rodinde Hendrickx,Katherine Rinaldi,Chiara Daraio

DOI: https://doi.org/10.48550/arXiv.1909.01926

2019-09-05

Abstract:The global increase in materials consumption calls for innovative materials, with tailored performance and multi-functionality, that are environmentally sustainable. Composites from renewable resources offer solutions to fulfil these demands but have so far been dominated by hybrid petrochemicals-based matrixes reinforced by natural fillers. Here, we present biological matrix composites with properties comparable to wood and commercial polymers. The biocomposites are obtained from cultured, undifferentiated plant cells, dehydrated and compressed under controlled conditions, forming a lamellar microstructure. Their stiffness and strength surpass that of commercial plastics of similar density, like polystyrene, and low-density polyethylene, while being entirely biodegradable. The properties can be further tuned varying the fabrication process. For example, filler particles can be integrated during fabrication, to vary the mechanical response or introduce new functionalities.

Applied Physics,Materials Science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a new type of environmentally sustainable biocomposite to meet the challenges brought by the increase in global material consumption. Specifically, the research aims to:

1. **Innovative material requirements**: With the increase in global material consumption, there is a need to develop innovative materials with customized properties and multifunctionality. These materials must be environmentally friendly while meeting performance requirements.

2. **Limitations of existing biocomposites**: At present, most biocomposites still rely on petroleum - based polymers as matrix materials, and their mechanical properties are relatively low, which limits their use in engineering and structural applications.

3. **Improve mechanical properties and degradability**: By using cultured undifferentiated plant cells to manufacture biocomposites, they have mechanical properties similar to those of wood and commercial polymers and are fully biodegradable, thus providing an environmentally - friendly alternative.

4. **Introduce new functions**: By adding different filler particles (such as carbon fibers, nanoclays, graphene, etc.) during the manufacturing process, the mechanical properties of the material can be further adjusted and new functional properties, such as conductivity and magnetism, can be introduced.

In summary, the goal of this paper is to develop a new type of plant - cell - based biocomposite. This material not only has excellent mechanical properties and degradability but can also be made multifunctional by adding different components, thus providing new solutions for the design and application of sustainable materials.

### Key formulas and chart descriptions
- **Young's Modulus**: It is used to measure the stiffness of a material and is defined as the ratio of stress to strain. The formula is:
\[
E=\frac{\sigma}{\epsilon}
\]
where \(E\) is Young's Modulus, \(\sigma\) is stress, and \(\epsilon\) is strain.

- **Tensile Strength**: It is the maximum stress that a material can withstand before breaking. The formula is:
\[
\sigma_{\text{max}}=\frac{F_{\text{max}}}{A_0}
\]
where \(\sigma_{\text{max}}\) is the tensile strength, \(F_{\text{max}}\) is the maximum load, and \(A_0\) is the original cross - sectional area.

- **Flexural Modulus** and **Modulus of Rupture (MOR)**: They are used to evaluate the performance of a material under flexural load and are defined as:
\[
E_f = \frac{L^3 m}{4 w d^3}
\]
\[
\sigma_{\text{MOR}}=\frac{3 F L}{2 b d^2}
\]
where \(E_f\) is the flexural modulus, \(L\) is the span, \(m\) is the bending moment, \(w\) is the deflection, \(d\) is the thickness; \(\sigma_{\text{MOR}}\) is the flexural strength, \(F\) is the maximum load, \(b\) is the width, and \(d\) is the thickness.

Through these indicators, researchers can comprehensively evaluate the mechanical properties of new materials and compare them with traditional materials.