Abstract:A turbulent boundary layer is an essential flow case of fundamental and applied fluid mechanics. However, accurate measurements of turbulent boundary layer parameters (e.g., friction velocity $u_\tau$ and wall shear $\tau_w$), are challenging, especially for high speed flows (Smits et al., 2011). Many direct and/or indirect diagnostic techniques have been developed to measure wall shear stress (Vinuesa et al., 2017). However, based on different principles, these techniques usually give different results with different uncertainties. The current study introduces a nonlinear data assimilation framework based on the Unscented Kalman Filter that can fuse information from i) noisy and gappy measurements from Stereo Particle Image Velocimetry, a Preston tube, and a MEMS shear stress sensor, as well as ii) the uncertainties of the measurements to estimate the parameters of a turbulent boundary layer. A direct numerical simulation of a fully developed turbulent boundary layer flow at Mach 0.3 is used first to validate the data assimilation algorithm. The algorithm is then applied to experimental data of a flow at Mach 0.3, which are obtained in a blowdown wind tunnel facility. The UKF-based data assimilation algorithm is robust to uncertain and gappy experimental data and is able to provide accurate estimates of turbulent boundary layer parameters.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the challenges faced in accurately measuring key parameters (such as friction velocity $u_\tau$ and wall - shear stress $\tau_w$) in the turbulent boundary layer. The accurate measurement of these parameters is crucial for understanding and optimizing fluid dynamics in high - speed flows, but there are many difficulties in actual operation, especially under high - Mach - number flow conditions. Although a variety of direct or indirect diagnostic techniques have been developed to measure wall - shear stress, since these techniques are based on different principles, the results they provide are different and have different uncertainties. To overcome these problems, the author proposes a nonlinear data assimilation framework based on the Unscented Kalman Filter (UKF). This framework can fuse discretized and noisy data from different sensors (such as Stereoscopic Particle Image Velocimetry (SPIV), Preston tube and MEMS shear stress sensors) and their uncertainties to estimate the parameters of the turbulent boundary layer. Through this method, accurate estimates of these parameters can be provided and their uncertainties can be quantified, thereby improving the reliability and accuracy of the measurement. Specifically, the main contributions of this study are as follows: 1. **Fusing multi - source data**: Using UKF to fuse data from multiple sensors, each of which has different uncertainties and characteristics, thereby improving the accuracy of parameter estimation. 2. **Handling nonlinear problems**: The traditional Extended Kalman Filter (EKF) may have errors when dealing with nonlinear systems, while UKF avoids the errors in the linearization process by selecting a set of sigma points to statistically characterize the dynamics of the nonlinear system. 3. **Verifying the effectiveness of the algorithm**: First, the performance of the data assimilation algorithm is verified using high - fidelity numerical simulation data, and then it is applied to experimental data, further proving the effectiveness and robustness of the algorithm in practical applications. In conclusion, this study aims to improve the accuracy and reliability of turbulent boundary layer parameter measurement through advanced data assimilation techniques, which is of great significance for both basic research and engineering applications in the field of fluid mechanics.

Unscented Kalman filter (UKF) based nonlinear parameter estimation for a turbulent boundary layer: a data assimilation framework

Data Assimilation for Unsaturated Flow Models with Restart Adaptive Probabilistic Collocation Based Kalman Filter

Adaptive Multi-Fidelity Probabilistic Collocation-Based Kalman Filter for Subsurface Flow Data Assimilation: Numerical Modeling and Real-World Experiment

A Stochastic Collocation Based Kalman Filter for Data Assimilation

A Closed-Form Nonlinear Data Assimilation Algorithm for Multi-Layer Flow Fields

A Data Assimilation Method for Recovering Turbulent Flows Using Heterogeneous Experimental Data

Model-based multi-sensor fusion for reconstructing wall-bounded turbulence

A multigrid/ensemble Kalman Filter strategy for assimilation of unsteady flows

Robust experimental data assimilation for the Spalart-Allmaras turbulence model

Recovering Turbulent Flow Field from Local Quantity Measurement: Turbulence Modeling Using Ensemble-Kalman-filter-based Data Assimilation

Assimilation of disparate data for enhanced reconstruction of turbulent mean flows

Adaptive Multifidelity Data Assimilation for Nonlinear Subsurface Flow Problems

Sensor placement for data assimilation of turbulence models using eigenspace perturbations

Data Assimilation for Transient Flow in Geologic Formations Via Ensemble Kalman Filter

Research on Data Assimilation Strategy of Turbulent Separated Flow over Airfoil

A Local Ensemble Kalman Filter for Atmospheric Data Assimilation

Uncertainty quantification of nonlinear Lagrangian data assimilation using linear stochastic forecast models

Combined State and Parameter Estimation in Level-Set Methods

Parameter Uncertainty Quantification for a Four-Equation Transition Model Using a Data Assimilation Approach

A physics-infused Immersed Boundary Method using online sequential Data Assimilation

Data Assimilation for Nonlinear Problems by Ensemble Kalman Filter with Reparameterization