Abstract:Wind turbines (WT) are steadily growing in size to increase their power production, which also causes increasing loads acting on the turbine's components. At the same time large structures, such as the blades and the tower get more flexible. To minimize this impact, the classical control loops for keeping the power production in an optimum state are more and more extended by load alleviation strategies. These additional control loops can be unified by a multiple-input multiple-output (MIMO) controller to achieve better balancing of tuning parameters. An example for MIMO control, which has been paid more attention to recently by wind industry, is Model Predictive Control (MPC). In a MPC framework a simplified model of the WT is used to predict its controlled outputs. Based on a user-defined cost function an online optimization calculates the optimal control sequence. Thereby MPC can intrinsically incorporate constraints e.g. of actuators. Turbine models used for calculation within the MPC are typically simplified. For testing and verification usually multi body simulations, such as FAST, BLADED or FLEX5 are used to model system dynamics, but they are still limited in the number of degrees of freedom (DOF). Detailed information about load distribution (e.g. inside the gearbox) cannot be provided by such models. In this paper a Model Predictive Controller is presented and tested in a co-simulation with SlMPACK, a multi body system (MBS) simulation framework used for detailed load analysis. The analysis are performed on the basis of the IME6.0 MBS WT model, described in this paper. It is based on the rotor of the NREL 5MW WT and consists of a detailed representation of the drive train. This takes into account a flexible main shaft and its main bearings with a planetary gearbox, where all components are modelled flexible, as well as a supporting flexible main frame. The wind loads are simulated using the NREL AERODYN v13 code which has been implemented as a routine to SlMPACK. This modeling approach allows to investigate the nonlinear behavior of wind loads and nonlinear drive train dynamics. Thereby the MPC's impact on specific loads and effects not covered by standard simulation tools can be assessed and investigated. Keywords. wind turbine simulation, model predictive control, multi body simulation, MIMO, load alleviation

Preventing wind turbine tower natural frequency excitation with a quasi-LPV model predictive control scheme

Wind Turbine Structural Load Reduction by Linear Single Model Predictive Control

An Economic Model Predictive Control Approach for Load Mitigation on Multiple Tower Locations of Wind Turbines

On the Analysis and Synthesis of Wind Turbine Side–Side Tower Load Control via Demodulation

On the Analysis and Synthesis of Wind Turbine Side-Side Tower Load Control via Demodulation

Inverse Optimal Adaptive Neural Power Regulation Control for Variable-Speed Wind Turbines with Load Mitigation

Adaptive Continuous Neural Pitch Angle Control for Variable‐Speed Wind Turbines

Individual pitch control by convex economic model predictive control for wind turbine side-side tower load alleviation

Convex Model Predictive Control for Down-regulation Strategies in Wind Turbines

Wind turbines power regulation using a low-complexity linear parameter varying-model predictive control approach

Effective Wind Speed Estimation Based Maximum Power Point Tracking Control for Variable-Speed Wind Turbine

Model predictive control of a wind turbine modelled in Simpack

Periodic Load Rejection for Floating Offshore Wind Turbines via Constrained Subspace Predictive Repetitive Control

Non-Linear Pitch Control of Wind Turbines for Tower Load Reduction

Linear interpolation model predictive control of large wind turbines for blade asymmetric fatigue loads mitigation

Effective Wind Speed Estimation and Prediction Based Feedforward Feedback Pitch Control for Wind Turbines.

Model Predictive Control With a Cascaded Hammerstein Neural Network of a Wind Turbine Providing Frequency Containment Reserve

Model predictive control‐based load frequency control for power systems with wind‐turbine generators

Model predictive control of wind turbine with aero-elastically tailored blades

Active Vibration Control of Wind Turbine Using Virtual TMD Algorithm Based on Aerodynamic-Structure-Servo Coupling Model

Model predictive control strategy in waked wind farms for optimal fatigue loads