Abstract:[Purpose] The iterative CT image reconstruction (IR) method has been successfully incorporated into commercial CT scanners as a means to promote low-dose CT with high image quality. However, the algorithm of the IR method has not been made publicly available by scanner manufacturers. Kudo reviewed the fundamentals of IR methods on the basis of the articles published by the joint research group of each manufacture that were released before and during product development (Med Imag Tech 32: 239-248, 2014). According to this review, the object function of the IR method consists of the data fidelity term (likelihood) and the regularization term. The regularization term plays a significant role in the IR method; however, it has not been clarified whether or not the variance of projection data should be included into the likelihood to act the regularization term effectively. Our purpose in this study was to investigate the relationship of the incident photon number and the reconstructed linear attenuation coefficients of the IR method by numerical experiments.[Methods] We assumed the X-ray beam was a pencil beam, and the system matrix was given by the line integral of linear attenuation coefficients because we focused on the accuracy of the reconstructed linear attenuation coefficients in the ideal photon detection system equations given by Kudo. Total variation (TV) and the relative difference function were used for regularization of the IR method. Three kinds of numerical phantoms with 256×256 pixels were used as test images. Poisson noise was added to the projection data with 256 linear sampling and 256 views over 180°. The accuracy of reconstructed linear attenuation coefficients was evaluated by the mean reconstructed value within a region of interest (ROI) and the relative root mean square errors (%RMSEs) to the object image.[Results] The linear attenuation coefficients were reconstructed accurately by the IR method including the variance of projection data into the likelihood in comparison with the IR method without including the variance. When the incident photon number ranged from 100 to 2000 for the object having a mean linear attenuation coefficient of 0.067 to 0.087 cm-1, the reconstructed linear attenuation coefficients in ROI were close to the true values. However, when the incident photon number was 50, both the accuracy and the uniformity of reconstructed images decreased.[Discussion] From the viewpoint of the visual observation, the image quality of the IR method was superior to that of the filtered back-projection (FBP) image processed with the Gaussian filter of FWHM equal to 3 pixels. For the object with a high absorber, the FBP gives linear attenuation coefficients that were lower than the true values. This phenomenon was also observed in the IR method. The projection data of CT were given by the logarithm operation of the ratio between the incident photon and the transmitted photon numbers. If the transmitted photon number happened to be equal to 0 owing to the influence of noise, it was held to a value of 1 to avoid the logarithm of zero. This process caused an error of the linear attenuation coefficients.[Conclusion] The variance of projection data should be included into the likelihood to act the regularization term effectively in the IR method.

Examining an Image Reconstruction Method in Infrared Emission Tomography

A Novel Analysis Method for Emission Tomography

Study on Image Reconstruction Algorithm of Electrical Resistance Tomography for Two-Phase Flow Measurement

Analysis of Iterative Region-of-interest Image Reconstruction for X-Ray Computed Tomography.

RESIRE: real space iterative reconstruction engine for Tomography

RESIRE: Accurate tomography with real space iterative reconstruction

Accurate real space iterative reconstruction (RESIRE) algorithm for tomography

ROI-Based Image Reconstruction of Electrical Impedance Tomography Used to Detect Regional Conductivity Variation.

Image Reconstruction Method of Electromagnetic Tomography Based on Finite Rate of Innovation.

Image Reconstruction Algorithms in Electromagnetic Tomography

TH-C-103-10: AIR: Fused Analytical and Iterative Reconstruction Method for Computed Tomography.

Image Reconstruction Algorithms for Radio Tomographic Imaging

Evaluation of Noise and Blur Effects with SIRT-FISTA-TV Reconstruction Algorithm: Application to Fast Environmental Transmission Electron Tomography

A Pseudo-TOF Image Reconstruction Approach for Three-Gamma Small Animal Imaging

An Investigation On The Property And Fast Implementation Of A Ray-Driven Method For Inversion Of The Attenuated Radon Transform With Variable Focusing Fan-Beam Collimators

Straight-Line-Trajectory-Based X-Ray Tomographic Imaging for Security Inspections: System Design, Image Reconstruction and Preliminary Results

Real space iterative reconstruction for vector tomography (RESIRE-V)

Investigation of Discrete Imaging Models and Iterative Image Reconstruction in Differential X-ray Phase-Contrast Tomography.

Efficient Iterative Image Reconstruction Algorithm for Dedicated Breast Ct

FIRT: Filtered Iterative Reconstruction Technique with Information Restoration.

[Incident Photon Number and Reconstructed Linear Attenuation Coefficients in Iterative CT Image Reconstruction]