Real-Time detection, classification and DOA estimation of Unmanned Aerial Vehicle

Konstantinos Polyzos,Evangelos Dermatas

DOI: https://doi.org/10.48550/arXiv.1902.11130

2019-02-27

Abstract:The present work deals with a new passive system for real-time detection, classification and direction of arrival estimator of Unmanned Aerial Vehicles (UAVs). The proposed system composed of a very low cost hardware components, comprises two different arrays of three or six-microphones, non-linear amplification and filtering of the analog acoustic signal, avoiding also the saturation effect in case where the UAV is located nearby to the microphones. Advance array processing methods are used to detect and locate the wide-band sources in the near and far-field including array calibration and energy based beamforming techniques. Moreover, oversampling techniques are adopted to increase the acquired signals accuracy and to also decrease the quantization noise. The classifier is based on the nearest neighbor rule of a normalized Power Spectral Density, the acoustic signature of the UAV spectrum in short periods of time. The low-cost, low-power and high efficiency embedded processor STM32F405RG is used for system implementation. Preliminary experimental results have shown the effectiveness of the proposed approach.

Audio and Speech Processing,Sound

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a low - cost and highly efficient real - time detection, classification and direction - of - arrival (DOA) estimation system for unmanned aerial vehicles (UAVs). Specifically, this research aims to achieve real - time processing of acoustic signals of UAVs by using low - power - consumption and low - cost hardware components, so as to improve the detection and tracking capabilities of UAVs in sensitive areas such as city centers, official buildings, airport areas, military or nuclear facilities. Traditional detection methods such as RF data - link signatures, radars and cameras have the problem of low reliability when facing small UAVs. Therefore, this research proposes a new method based on acoustic - signal processing to overcome the limitations of existing technologies.

The innovations of this system are as follows:
1. **Low - cost hardware**: Use very low - cost hardware components, including three to six microphone arrays, non - linear amplification and digital filters, to avoid the saturation effect when the UAV is close to the microphone and improve the detection accuracy when flying at a long distance.
2. **Advanced array - processing techniques**: Adopt advanced array - processing methods, such as array calibration and energy - based beam - forming techniques, for detecting and locating broadband sources in the near - field and far - field.
3. **Oversampling techniques**: Adopt oversampling techniques to increase the accuracy of the acquired signals and reduce quantization noise at the same time.
4. **Classification algorithm**: Use a normalized power - spectral - density feature set based on the nearest - neighbor rule for UAV acoustic - spectrum classification in a short time.
5. **Efficient processor**: Implement the system using the STM32F405RG embedded processor, which has the characteristics of high performance and low power consumption.

Through these technological innovations, this system can achieve accurate detection and classification of UAVs in practical applications, especially in noisy environments. Preliminary experimental results show that this system can effectively detect and classify different types of UAVs.