Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

The effect of B site doping of Nb5+ and aging process on the properties of BNKT-BT lead-free piezoelectric ceramics

Improvement of electrostrain properties of BNT-based piezoelectric ceramics by co-doping of Sr2+ and Ta5+ in A and B sites

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Effects of Nb5+ Doping on Sintering and Electrical Properties of Lead-Free (bi0.5na0.5)tio3 Ceramics

Doping Effects In (Ba0.85ca0.15)(Hf0.1ti0.9)O-3 Lead-Free Piezoelectric Ceramics Prepared Via Powder Injection Moulding Using Simple Binder

High electrostrictive properties and energy storage performances with excellent thermal stability in Nb-doped Bi0.5Na0.5TiO3-based ceramics

Enhanced piezoelectric performance in Na0.5Bi4.5Ti4O15‐based Bismuth‐layered ceramics by Nb/Mn doping modification

Effect Of (Bi0.5k0.5)Tio3 On The Electrical Properties, Thermal And Fatigue Behavior Of (K0.5na0.5)Nbo3-Based Lead-Free Piezoelectrics

Enhanced Temperature Stability of (1 − x )(K 0.5 Na 0.5 ) 0.94 Li 0.06 NbO 3 - x (Bi 0.5 Na 0.5 )TiO 3 Lead-Free Piezoelectric Ceramics

Large electromechanical strain and electrostrictive effect in (1 − x )(Bi 0.5 Na 0.5 TiO 3 –SrTiO 3 )– x LiNbO 3 ternary lead-free piezoelectric ceramics

Effect of (Bi 0.5 K 0.5 )TiO 3 on the electrical properties, thermal and fatigue behavior of (K 0.5 Na 0.5 )NbO 3 -based lead-free piezoelectrics

Enhanced Temperature Stability of (1 − )(KNa)LiNbO-(BiNa)TiO Lead-Free Piezoelectric Ceramics

Electric Field-Induced Giant Strain and Piezoelectricity Enhancement Effect in (bi1/2na1/2)0.935+xba0.065ti1−x(pr1/2nb1/2)xo3 Lead-Free Ceramics

Enhanced Temperature Stability Of (1-Aeuro Parts Per Thousand X)(K0.5na0.5)(0.94)Li0.06nbo3-X(Bi0.5na0.5)Tio3 Lead-Free Piezoelectric Ceramics

Influence of Different Dopants on the Piezoelectric Properties of the Na<sub>1/2</sub>Bi<sub>1/2</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub>- Lead-Free Ceramics

Influence of Different Dopants on the Piezoelectric Properties of the Na1/2bi1/2tio3-Batio3 Lead-Free Ceramics

Phase transition and energy storage properties of Bi0.5Na0.5TiO3–Bi(Mg2/3Nb1/3)O3 lead-free ceramics

Improvement of electric field-induced strain and energy storage density properties in lead-free BNKT-based ceramics modified by BFT doping

Dielectric, Ferroelectric and Field-Induced Strain Response of Lead-Free (fe, Sb)-modified (bi0.5na0.5)0.935ba0.065tio3 Ceramics

The Electrical Properties of (1−x)(bi0.5na0.5tio3–bi0.5k0.5tio3–batio3)–xcazro3 Lead-Free Piezoelectric Ceramics

Large field-induced strain with enhanced temperature-stable dielectric properties of AgNbO3-modified (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics