Abstract:To rationalize the relatively high investment that industrial automation systems entail, research in the field of intelligent machines should target high value functions such as fettling, die-finishing, deburring, and fixtureless manufacturing. For achieving this goal, past work has concentrated on force control algorithms at the system level with limited focus on performance expansion at the actuator level. We present a comprehensive literature review on robot force control, including algorithms, specialized actuators, and robot control software. A robot force control testbed was developed using Schunk's PowerCube 6-DOF Arm and a six-axis ATI force/torque sensor. Using parameter identification experiments, manipulator module inertias and the motor torque constant were estimated. Experiments were conducted to study the practical issues involved in implementing stable contact transitions and programmable endpoint impedance. Applications to human augmentation, virtual fixtures, and teleoperation are discussed. These experiments are used as a vehicle to understand the performance improvement achievable at the actuator level. The approach at UTRRG has been to maximize the choices within the actuator to enhance its intelligence. Drawing on this 20-year research history in electromechanical actuator architecture, we propose a new concept that mixes two inputs, distinct in their velocity ratios, within the same dual actuator called a Force/Motion Actuator (FMA). Detailed kinematic and dynamic models of this dual actuator are developed. The actuator performance is evaluated using simulations with an output velocity specification and resolving input trajectories using a minimum-norm solution. It is shown that a design choice of 14:1 motion scaling between the two inputs results in good sensitivity to output force disturbances without compromising velocity tracking performance.

Total energy-shaping control for mechanical systems via Control-by-Interconnection

Towards A Constructive Interconnection And Damping Assignment Stabilization Methodology

Control Via Interconnection and Damping Assignment of Linear Time-Invariant Systems: a Tutorial

Adaptive total energy shaping of a class of manipulators

A Unified Approach for Second-Order Control of the Manipulator With Joint Physical Constraints

Distributed IDA-PBC for a Class of Nonholonomic Mechanical Systems

Precision Motion Control of Separate Meter-In and Separate Meter-Out Hydraulic Swing System with State Constraints

IDA-PBC with adaptive friction compensation for underactuated mechanical systems

Robust IDA-PBC for underactuated mechanical systems subject to matched disturbances

Control Of Underactuated Bridge Cranes: A Simplified Ida-Pbc Approach

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Robustness enhancement of IDA-PBC controller in stabilising the inertia wheel inverted pendulum: theory and real-time experiments

Data-driven passivity-based control of underactuated mechanical systems via interconnection and damping assignment

Power-Shaping Model-Based Control With Feedback Deactivation for Flexible-Joint Robot Interaction

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Time-Optimal Constrained Adaptive Robust Control of Single-DOF Mechanical Systems: A Comparative Study with BLF-based Methods

Control Barrier Functions for Singularity Avoidance in Passivity-Based Manipulator Control

Robust Neural IDA-PBC: passivity-based stabilization under approximations

Reduced order in domain control of distributed parameter port-Hamiltonian systems via energy shaping

Preliminary Studies on Force/Motion Control of Intelligent Mechanical Systems

An improved Udwadia–Kalaba approach for controller design in underactuated mechanical systems