Barley Straw Cellulose Fiber Isolation Using Pressurized Aqueous Ethanol, Ultrasound, and Bleaching Processes

Zhengjie Liu,Marleny D. A. Saldaña
DOI: https://doi.org/10.1007/s12221-024-00767-2
IF: 2.5
2024-11-13
Fibers and Polymers
Abstract:The main objectives of this study were to determine the optimum conditions of ultrasound (US) treatment to remove non-cellulosic biomass from barley straw residues, evaluate the effect of US treatment on the characteristics of acidified sodium chlorite (ASC)- or alkaline hydrogen peroxide (AHP)-bleached cellulose fibers, and compare the characteristics of cellulose fibers obtained after AHP and ASC bleaching. First, barley straw was treated by pressurized aqueous ethanol (PAE), then US treatment (400–1200 W/20 kHz/10–40 min) and ASC (1.7%/75 °C/2–6 h) or AHP bleaching (20%/75 °C/2–6 h) were performed to obtain cellulose fibers. Chemical composition, color, crystallinity, changes of functional groups, and morphology of cellulose fibers obtained were determined. The PAE treatment at 200 °C and 50 bar using 20% ethanol followed by US treatment at 1200 W/40 min removed most of the hemicellulose (92.9 0.1%) and half of the initial lignin content, resulting in a cellulose-rich residue. Then, 99.1 1.1 of hemicellulose and 86.5 0.6% of lignin were removed after bleaching for 6 h. The highest purity of the barley straw cellulose fiber was 91.1 2.3%, obtained after PAE + US + AHP bleaching for 6 h. At this optimum condition, the resultant cellulose fibers had crystallinity index of 38.9% without changing cellulose I structure. Morphology images revealed that the US treatment reduced the diameters of cellulose fibers to 3.54 and 4.42  m after PAE + US + ASC and PAE + US + AHP bleaching for 6 h, respectively.
materials science, textiles,polymer science
What problem does this paper attempt to address?