Abstract:The interaction of microencapsulated phase change materials (PCMs) with polymeric chemical additives in an air lime binding matrix was studied. These polymer-based additives included an adhesion booster (derived from starch) and a superplasticizer (polycarboxylate ether). Two different PCMs with melting points of 18 °C and 24 °C were assayed. The microcapsules were composed of melamine, with paraffin-based PCM cores. Measurements of zeta potential, particle size distribution, adsorption isotherms, and viscosity analyses were performed to comprehend the behavior of the polymer-based additives within the air lime matrix and their compatibility with PCMs. Zeta potential experiments pointed to the absence of a strong interaction between the lime particles and the microcapsules of PCMs. At the alkaline pH of the lime mortar, the negative charge resulting from the deprotonation of the melamine shell of the microcapsules was shielded by cations, yielding high positive zeta potential values and stable dispersions of lime with PCMs. The polycarboxylate ether demonstrated the ability to counteract the increase in mixing water demand caused by the PCM addition in the lime matrix. The dispersing action of the superplasticizer on the lime particles was seen to exert a collateral dispersion of the PCMs. Conversely, despite the positive values of zeta potential, the addition of the starch-based additive resulted in the formation of large PCM-lime clumps. Air lime renders incorporating 5, 10, and 20% PCMs by weight with various dosages of these chemical additives were experimented with until the optimal formulation for the specific application of the mortars as renderings was achieved. This fine-tuned formulation effectively tackled issues commonly associated with the addition of PCMs to mortars, such as poor adhesion, crack formation, and reduced fluidity.

Effect of adhesive on photocatalytic NOx removal and stability over polymeric carbon nitride coated cement mortars

Interactions Between Organic and Inorganic Phases in PA- and PU/PA-Modified-Cement-Based Materials

NO x degradation by cement mortar containing B-TiO 2 /MgAl-CLDH under visible light: Experimental and modeling

Surface properties and de-polluting performance of a photocatalytic coating incorporating novel core@shell nanospheres for cementitious substrate

NOx removal capacity and compressive strength of photocatalytic cementitious materials with various color properties

Highly-efficient green photocatalytic cementitious materials with robust weathering resistance: From laboratory to application

Application Research on Polymer Cement Mortar Incorporated with Nitrogen Modified Nano-Tio_2 Photocatalysis Material

Compatibility and Photocatalytic Capacity of the Novel Core@shell Nanospheres in Cementitious Composites

Physical and Chemical Influence of Polyacrylate Latex on Cement Mortars

Photocatalytic activity of porous magnesium oxychloride cement combined with AC/TiO2 composites

Preparation and Properties of Magnesium Cement-Based Photocatalytic Materials

Study on the Interaction of Polymeric Chemical Additives with Phase Change Materials in Air Lime Renders

Photocatalytic Degradation of Vehicle Exhaust by Nano-TiO2 Cement Slurry: Experimental Factors and Field Application

Evaluation of self-cleaning performance of TiO2-intermixed and TiO2-coated cement mortars under natural sunlight

Study on Visible Light Catalysis of Graphite Carbon Nitride-Silica Composite Material and Its Surface Treatment of Cement

Enhancing adhesive strength and durability: Exploring the benefits of upconversion particle-assisted near-infrared photopolymerization

The Effect of TiO2 Doped Photocatalytic Nano-Additives on the Hydration and Microstructure of Portland and High Alumina Cements

Immobilization of TiO2/g-C3N4 on the surface of ceramic foam and the enhanced photocatalytic performance for air purification

Photocatalyst efficiencies in concrete technology: The effect of photocatalyst placement

Research on the influence of dispersed carbon nanomaterials with different water reducing agent in cementitious mortar

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides