Abstract:In the present study, an electrochemical glucose biosensor has been developed based on nano-copper oxide micro hollow spheres. The nano-copper oxide micro hollow spheres were synthesized via hydrothermal method using pluronic F-127 as a surfactant. For structural characterization of CuO hollow sphere structures, the scanning electron microscopy and X-ray diffraction spectroscopy were applied. The performance parameters of the sensor were improved by optimizing the modification process. The electrochemical characteristics of the proposed glucose biosensor were investigated by using cyclic voltammetry and chronoamperometry techniques in both 0.1 M and 1 M NaOH solutions. The results revealed that the proposed electrode has a wide dynamic range from 1 µM to 11.50 mM for glucose detection at 0.1 M NaOH solution which covers two linear ranges from 1 µM to 3 mM and from 3 mM to 11.50 mM. The sensitivities of the two linear ranges were obtained as 25.0 ± 0.8 µA·mM−1·cm−2 and 13.6 ±0.3 µA·mM−1·cm−2, respectively. An extremely wide linear range from 1 µM to 16 mM with a sensitivity of 35.2 ± 0.4 µA·mM−1 cm−2 was achieved for the 1 M NaOH solution. The sensor achieved a 1 µM practical lowest limit of detection which is an excellent low limit of detection at both NaOH concentrations compared to some important previously reported works. In addition, the good tolerance toward the interfering species and the satisfactory behavior in real sample analysis verified the promising performance of the proposed sensor.

A Non-enzymatic glucose sensor via uniform copper nanosphere fabricated by two-step method

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

Non-enzymatic glucose sensor based on copper nanoparticles modified microelectrode

Construction of a non-enzymatic glucose sensor based on copper nanoparticles/poly( o -phenylenediamine) nanocomposites

Ultrasensitive and Selective Non-Enzymatic Glucose Detection Using Copper Nanowires.

CuO nanowires based sensitive and selective non-enzymatic glucose detection

Uniform and Dense Copper Nanoparticles Directly Modified Indium Tin Oxide Electrode for Non-Enzymatic Glucose Sensing

A Non-Enzymatic Glucose Sensor Based on Copper Oxide Nanowires-Singlewall Carbon Nanotubes

Synthesis of Copper Nanoparticles in the Ordered Mesoporous Carbon (cu@omc) for Glucose Detection

Seed-mediated Synthesis of Copper Nanoparticles on Carbon Nanotubes and Their Application in Nonenzymatic Glucose Biosensors.

Fabrication of Nanoporous Copper Oxide Film Biosensor with a Polymer Sphere Template and Its Application to Glucose Sensing

Three-Dimensional Copper Foam Supported Cuo Nanowire Arrays: an Efficient Non-Enzymatic Glucose Sensor

Copper Nanoparticle/Graphene Oxide/Single Wall Carbon Nanotube Hybrid Materials As Electrochemical Sensing Platform for Nonenzymatic Glucose Detection

Synthesis of Copper Nanorods for Non-Enzymatic Amperometric Sensing of Glucose

A Novel Non-Enzymatic Glucose Sensor Based on Cu Nanoparticle Modified Graphene Sheets Electrode

Sensitive electrochemical nonenzymatic glucose sensing based on anodized CuO nanowires on three-dimensional porous copper foam

Fabrication of Non-enzymatic Electrochemical Glucose Sensor Based on Nano-copper Oxide Micro Hollow-spheres

One-pot synthesis of uniform Cu nanowires and their enhanced non-enzymatic glucose sensor performance

Comparison of Copper(II) Oxide Nanostructures with Different Morphologies for Nonenzymatic Glucose Sensing

Preparation of functionalized copper nanoparticles and fabrication of a glucose sensor

A novel non-enzymatic glucose sensor based on a Cu-nanoparticle-modified graphene edge nanoelectrode