Abstract:Conventional lead halide Perovskite Solar Cells (PSC) have toxicity and stability issues. Therefore it is crucial to look for lead-free inorganic perovskite material, such as La 2 NiMnO 6 , RbGeI 3 , CsGeI 3 , Cs 2 AgBiBr 6 and others. There has been much work in the area of PSC using Cs 2 AgBiBr 6 as an absorber, However, due to some critical issues of Cs 2 AgBiBr 6 , such as the film's broad bandgap which limits its capacity to absorb light, leading to corresponding PSC being typically restricted to around 4% efficiency. In this work, a lead-free PSC with Cs 2 AgBiBr 6 as the absorber has been engineered to resolve the issues by considering the experimental works in the literature to increase efficiency to 6.3% from a maximum 4.48% as reported in the literature. The output response of both design approaches, as well as the potentiality of future designs, are investigated in terms of output parameters, i.e., Open-Circuit Voltage (V OC ), Short-circuit Current density (J SC ), Fill Factor (FF), and Power Conversion Efficiency (PCE). Besides, this work also focuses on eliminating Sulphur from ETLs by working on several sulphides and oxide-based Electron Transport Layers (ETLs). Several solar cell device structures have been analyzed for their numerical simulation with sulphide ETLs such as ZnS, WS 2 , CdS, CdZnS and oxide ETLs such as TiO 2 , ZnO, WO 3 , IGZO. To progress towards eco-friendly PSCs, alternatives to sulphide, several transparent oxide alternatives (TiO 2 , ZnO, WO 3 , IGZO) have been considered as ETLs. These ETLs have been further doped with Mg to enhance the performance parameters. Mg-doped based ETLs additionally behaving as Hole-blocking layers (HBLs) in corresponding PSCs leads to comparatively significantly better performance in a number of aspects, including V OC (1.21 V), PCE (5.74%), J SC , and FF. The solar cell design has been optimized for high performance through various techniques such as varying ETL and absorber thickness, interface defects variation, series/shunt resistance, band to band recombination, and bandgap grading through doping. Also an effective electric field (E eff ) that depicts the conduction's impact has been calculated. Best performing device among different designs among PSCs with sulphide and oxide-based ETLs has been ZnS/Cs 2 AgBiBr 6 /Cu 2 O (PCE-6.3%) and Mg-doped (20%) ZnO/Cs 2 AgBiBr 6 /Cu 2 O (PCE-5.74%). These results may help researchers in their efforts to find the best-suited materials for the design of high-performance PSCs in the future.

Device modeling and performance analysis of an all-inorganic lead-free Ag2BiI5 rudorffite-based solar cell with AgSCN as HTL via GPVDM simulation software

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Optimization of an inorganic lead free RbGeI3 based perovskite solar cell by SCAPS-1D simulation

Design and optimization of Cs2SnI6 based inorganic perovskite solar cell model: numerical simulation

Inorganic and Lead-Free AgBiI4 Rudorffite for Stable Solar Cell Applications

Numerical Simulation of Cs2AgBiBr6-based Perovskite Solar Cell with ZnO Nanorod and P3HT as the Charge Transport Layers

Device engineering of double perovskite based solar cells towards high-performance, eco-friendly solar cells

Design and performance exploration of Pb-free low-cost all-inorganic perovskite-inspired CuAgBi2I8 solar cells: Theoretical approach

Design and Device Numerical Analysis of Lead-Free Cs2AgBiBr6 Double Perovskite Solar Cell

Numerical simulation and performance optimization of a lead-free inorganic perovskite solar cell using SCAPS-1D

Doping engineering of carrier transporting layers for ambient-air-stable lead-free rudorffite solar cells prepared by thermal-assisted doctor blade coating

Design and Performance Exploration of a Lead-Free All-Inorganic Hydrogenated Cs2AgBiBr6-Based Double Perovskite Solar Cell: A Numerical Modeling Study

Investigating the potential of lead‐free double perovskite Cs2AgBiBr6 material for solar cell applications: A theoretical study

Simultaneous Power Conversion Efficiency and Stability Enhancement of Cs2AgBiBr6 Lead‐Free Inorganic Perovskite Solar Cell Through Adopting a Multifunctional Dye Interlayer

An In‐Depth Investigation of the Combined Optoelectronic and Photovoltaic Properties of Lead‐Free Cs2AgBiBr6 Double Perovskite Solar Cells Using DFT and SCAPS‐1D Frameworks

Current Status of Pb-free PSCs and Infer the Highest Achievable PCE Via Numerical Modeling, and Optimization of Novel Structure FAMASnGeI3 Based PSCs

Highly efficient lead-free silver bismuth iodide (Ag 3 BiI 6 ) rudorffite solar cells with novel device architecture: A numerical study

Structural optimization of inverted CsPbI2Br perovskite solar cells for enhanced performance via SCAPS-1D simulation

Performance Impact of Lead‐Free CsSn0.5Ge0.5I3 Based Perovskite Solar Cells with HTL‐Free Incorporation

A Novel Perovskite Solar Cell Comprising CsPbI2Br/Cs2SnI6 (CsGeI3) Cascade Absorbing Bilayer and Cr2O3 Electron Transport Material: A Theoretical Comparison Study

Design and performance optimization of a novel tri-layer unleaded all inorganic lead-free mixed halide CsSnI 3-x Br x heterojunction solar cell