Abstract:The activated sludge process (ASP) is widely used to treat both domestic and industrial wastewaters. The main disadvantage of the ASP is the expense of disposing of excess sludge, which can account for between fifty to sixty percent of the operating costs of a treatment plant. We examine a model for the ASP in which the biochemical processes are represented by a simplified version of the well known activated sludge model No. 1. A promising method to decrease sludge production is to increase sludge biodegradability. A variety of experimental methods exist to do this, such as enzyme treatment, ozonation, heat treatment, and ultrasound. We investigate the effect of increasing the decay coefficient upon two important process variables: the chemical oxygen demand and the total suspended solids. References R. T. Alqahtani, M. I. Nelson, and A. L. Worthy. Sludge disintegration. Appl. Math. Model. 40.17–18 (2016), pp. 7830–7843. doi: 10.1016/j.apm.2016.03.040 A. E. Billing and P. L. Dold. Modelling techniques for biological reaction systems; 2. Modelling of the steady state case. Water SA 14.4 (1988), pp. 193–206. http://wrcwebsite.azurewebsites.net/wp-content/uploads/mdocs/WaterSA_1988_04_504.PDF. European Council. Council Directive 91/271/EEC of 21 May 1991 concerning urban waste-water treatment. Official J. E.U. L135 (1991), pp. 40–52. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex%3A31991L0271 X. Hao, Q. Wang, Y. Cao, and M. C. M. van Loosdrecht. Evaluating sludge minimization caused by predation and viral infection based on the extended activated sludge model No. 2d. Water Res. 45.16 (2011), pp. 5130–5140. doi: 10.1016/j.watres.2011.07.013 M. Henze, C. P. L. Grady Jr, W. Gujer, G. V. R. Marais, and T. Matsuo. A general model for single-sludge wastewater treatment systems. Water Res. 21.5 (1987), pp. 505–515. doi: 10.1016/0043-1354(87)90058-3 S. G. Lu, T. Imai, M. Ukita, M. Sekine, T. Higuchi, and M. Fukagawa. A model for membrane bioreactor process based on the concept of formation and degradation of soluble microbial products. Water Res. 35.8 (2001), pp. 2038–2048. doi: 10.1016/S0043-1354(00)00461-9 M. I. Nelson, E. Balakrishnan, H. S. Sidhu, and X. D. Chen. A fundamental analysis of continuous flow bioreactor models and membrane reactor models to process industrial wastewaters. Chem. Eng. J. 140.1-3 (2008), pp. 521–528. doi: 10.1016/j.cej.2007.11.035 M. I. Nelson, H. S. Sidhu, S. Watt, and F. I. Hai. Performance analysis of the activated sludge model (number 1). Food Bioprod. Process. 116 (2019), pp. 41–53. doi: 10.1016/j.fbp.2019.03.014 Y. Wei, R. T. Van Houten, A. R. Borger, D. H. Eikelboom, and Y. Fan. Minimization of excess sludge production for biological wastewater treatment. Water Res. 37.18 (2003), pp. 4453–4467. doi: 10.1016/S0043-1354(03)00441-X S.-H. Yoon and S. Lee. Critical operational parameters for zero sludge production in biological wastewater treatment processes combined with sludge disintegration. Water Res. 39 (2005), pp. 3738–3754. doi: 10.1016/j.watres.2005.06.015

Optimising operation of a biological wastewater treatment application

Control Strategy of Shortcut Nitrification.

Modelling to Lower Energy Consumption in a Large WWTP in China While Optimising Nitrogen Removal

Optimization of biological nitrogen removal in full-scale municipal WWTPs using activated sludge model simulation

Optimization of wastewater treatment plant operation for greenhouse gas mitigation

A simulation-based integrated approach to optimize the biological nutrient removal process in a full-scale wastewater treatment plant

Assessment and optimization of wastewater treatment plant in terms of effluent quality, energy footprint, and greenhouse gas emissions: An integrated modeling approach

Environmental Biological Model Based on Optimization of Activated Sludge Process

Moving and Fixed Biological Biofilm Systems in Wastewater Treatmentwhen dose an Application Makes Sense

Achieving superior nitrogen removal in an air-lifting internal circulating reactor for municipal wastewater treatment: Performance, kinetic analysis, and microbial pathways

Aeration strategy based on numerical modelling and the response mechanism of microbial communities under various operating conditions

Wastewater Treatment System Optimization for Sustainable Operation of the SHARON–Anammox Process under Varying Carbon/Nitrogen Loadings

Modeling the partial nitrification in sequencing batch reactor for biomass adapted to high ammonia concentrations

Interaction between Biological Nitrogen Removal Processes and Operating Parameters: A Review

Comparative assessment of different scenarios for upgrading activated sludge wastewater treatment plants in developing countries

Application of real-time nitrogen measurement for intermittent aeration implementation in a biological nitrogen removal system: performances and efficiencies

Optimizing anammox capacity for weak wastewater in an AnSBBR using aerobic activated sludge as inoculation

Optimizing wastewater treatment plant operational efficiency through integrating machine learning predictive models and advanced control strategies

Assessment of aeration control strategies for biofilm-based partial nitritation/anammox systems

Developing a practical model for the optimal operation of wastewater treatment plant considering influent characteristics

Investigating the effect of changing the decay coefficient in an activated sludge model