Bilocal Dynamics for Self-Avoiding Walks

S. Caracciolo,Maria Serena Causo,G. Ferraro,M. Papinutto,A. Pelissetto

DOI: https://doi.org/10.1023/A:1018719226557

1999-11-25

Abstract:

What problem does this paper attempt to address?

Studies on Superprism Effects in Multilayer Thin Film Stacks

X. Liu,X. Z. Sun,P. F. Gu

DOI: https://doi.org/10.1117/12.625018

2005-01-01

Abstract:The concept of "Superprism" which is used in photonic crystal will be introduced into optical thin film coatings, due to the fact that the group velocity of the light is different as the wavelength in certain special case for the multiplayer thin film coatings. In this paper, The "superprism" effect of multilayer thin film coatings will be presented both from theoretical analysis and experimental results, these researches will create an new application of the thin film coatings not only to be a spectral filter but also can acts as "thin film gratings".
Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

Shuntao Li,Huiyuan Zhang,Huimin Zhang,Junhao Li,Yongdong Du,Mingxuan Bi,Qiu-Shun Li,Yunqian Cui,Lei Cai,Mingyu Li,Wen-Fei Dong

DOI: https://doi.org/10.1109/jlt.2024.3510933

IF: 4.7

2024-01-01

Journal of Lightwave Technology

Abstract:The dual resonant peaks of a long-period fiber grating (LPFG) have been prepared by depositing the polyelectrolyte multilayer films composed of salt-containing poly(diallyldimethyl- ammonium chloride) (PDDA) and salt-containing poly(sodium-p- styrenesulfonate) (PSS). The multilayered polyelectrolyte films of PDDA/PSS were alternately assembled on the surface of the LPFG via electrostatic layer-by-layer (LBL) self-assembly approach. The sensing performance of the dual resonant peaks of the LPFG to nanofilms has been further evaluated. The experimental results demonstrated that the optimal sensitivities of the left resonant peak and the right resonant peak in the dual resonant peaks were as high as 52.79 nm/bilayer and 56.09 nm/bilayer, respectively, which were approximately 128 times and 136 times that of another single resonant peak in sequence. Finally, the reason for the emergence of the dual resonant peaks and the corresponding response mechanism to nanofilms were further analyzed and discussed theoretically. These findings are very beneficial for exploring the application of LPFGs in many fields such as biochemical sensing, drug screening, food detection and so on.
Spectral polarization-dependent loss of cascaded long-period fiber gratings

Byeong Ha Lee,Jaehee Cheong,Un-Chul Paek

DOI: https://doi.org/10.1364/ol.27.001096

IF: 3.6

2002-07-01

Optics Letters

Abstract:We have measured the spectral polarization-dependent losses of cascaded long-period fiber gratings composed of single, double, and triple identical gratings and fabricated by exposure of a UV laser beam on one side of a fiber. The measurement was made by use of the Mueller matrix method for scanning the wavelength of the incident beam. The polarization-dependent loss was dramatically increased as the number of cascaded gratings was increased. The formation of the UV-induced geometric birefringence in the fiber grating and its relationship to the fine interference fringes formed by cascading gratings are discussed.

optics
Characterization of Dual-Periodic Structures with Optical Scattering

Jun Wang,Wei Zhou,Anand K. Asundi,Lennie E. N. Lim,Er-Ping Li

DOI: https://doi.org/10.1016/j.measurement.2010.09.007

IF: 5.6

2010-01-01

Measurement

Abstract:Laser scattering method as a non-contact method provides an opportunity to real-time monitor the evolution of periodic nanostructures during fabrication, e.g. when the surface is irradiated with a focused ion beam. Using the method, the diffraction angle needs calibrating according to the grating equation. In this paper, we used scalar analysis to demonstrate the use of a dual-period structure for formation of dual spectral peaks at the 1st diffraction order. We then made use of numerical study based on rigorous coupled-wave analysis to optimize these Al-grating structures in terms of depth. It is found that dual-peak wavelengths can be selected by using different angles of incidence and low-loss reflection is obtained using an optimized structure. It is further proposed that these wavelengths can be used to determine the diffraction angle during fabrication without the need for pre-calibration of an optical scattering system.
Turn Around Point Long Period Fiber Gratings With Coupling to Asymmetric Cladding Modes Fabricated by a Femtosecond Laser and Coated With Titanium Dioxide

Duarte Viveiros,Jose Manuel Marques Martins de Almeida,Lus Coelho,Helena Vasconcelos,Joo M. Maia,Vitor A. Amorim,Pedro A. S. Jorge,Paulo V. S. Marques,Luis Coelho,Joao M. Maia

DOI: https://doi.org/10.1109/jlt.2021.3078257

IF: 4.7

2021-07-01

Journal of Lightwave Technology

Abstract:A detailed study of turn around point (TAP) long period fiber gratings (LPFGs) with coupling to the asymmetric cladding modes of a standard single-mode fiber (SMF-28e), fabricated by femtosecond (fs) laser direct writing was realized. The entire fabrication process, including the coating with different titanium dioxide (TiO2) film thicknesses of LPFGs and the corrections needed to achieve coated devices operating precisely in the TAP condition with coupling to the asymmetric cladding modes, was addressed. The significant fabrication details are also given, such as inscription periods, shape and localization of the refractive index modifications across the core. The fabrication process described allows the optimization of the LPFGs sensitivity in regards to the surrounding refractive index(SRI). Optimization of the writing parameters to obtain gratings working at the TAP for two different media surrounding the fiber (water and air) was achieved. It was demonstrated that for a grating period of 191.8m, the LP1,12 mode exhibits a TAP at 1442.7 nm in air, and for a period of 192.5m, the same mode exhibits a TAP at 1448.6 nm in water. The LPFGs operating at the TAP in air and water were coated with 10, 20, and 30 nm thin TiO2 film thicknesses and the spectral behavior characterized. The wavelength sensitivity to the surrounding refractive index (SRI) was assessed in the range between 1.3700 to 1.4120, and a maximum sensitivity of 8051.4nmRIU was measured for the 192.5 m LPFG coated with a 30 nm thick TiO2 film.

engineering, electrical & electronic,optics,telecommunications
pH-sensing properties of cascaded long- and short-period fiber grating with poly acrylic acid/poly allylamine hydrochloride thin-film overlays

Ying Yang

DOI: https://doi.org/10.1117/1.oe.53.11.116112

IF: 1.3

2014-11-17

Optical Engineering

Abstract:Based on coupled-mode theory and transfer matrix method, the mode coupling mechanism and the reflection spectral properties of coated cascaded long- and short-period gratings (CLBG) are discussed. The effects of the thin-film parameters (film refractive index and film thickness) on the reflection spectra of the coated CLBG are simulated. By using electrostatic self-assembly method, poly acrylic acid (PAA) and poly allylamine hydrochloride (PAH) multilayer molecular pH-sensitive thin-films are assembled on the surface of the partial corroded CLBG. When the CLBG coated with PAA/PAH films are used to sense pH values, the resonant wavelengths of the CLBG have almost no shift, whereas the resonance peak reflectivities change with pH values. In addition, the sensitivities of the resonance peak reflectivities responding to pH values are improved by an order of magnitude.

optics
High-sensitivity sensor design based on cascaded long-period fiber grating with film coating

Zhengtian Gu,Xiuli Jiang,Haiyun Chen

DOI: https://doi.org/10.1117/1.oe.53.2.021104

IF: 1.3

2013-09-05

Optical Engineering

Abstract:A cascaded long-period fiber grating (CLPFG) sensor with film coating is presented. Two long-period fiber gratings (LPFGs) are cascaded to form a Mach-Zehnder interferometer. The optical transmission spectrum and the sensing characteristics for ambient refractive index (RI) measurement of the CLPFG sensor are analyzed in a form of transfer matrix based on rigorous coupled-mode theory. The results indicate that it is highly sensitive to the film RI and surrounding RI, so it can be used as a gas sensor or a solution sensor. Data simulation shows that the resolution of the RI of the films is predicted to be 10−7. Further, a cascaded chirped LPFG is introduced to study its sensing performance. The influence of the chirp coefficient and the grating structural parameters on the transmission spectrum of the cascaded chirped LPFG is analyzed. Data simulation shows that the resolution of the RI of the films is predicted to be 10−9. In contrast to the conventional measurement method based on interrogating the wavelength change, intensity detection of this cascaded chirped LPFG sensor means that no optical spectrum analyzer is required in the measuring system, which is favorable for practical applications, especially for in situ environmental motoring.

optics
Spectral and Sensing Performance of Long-Period Fiber Gratings at 2 m Waveband

Yunhe Zhao,Wei Wang,Yunqi Liu,Zuyao Liu,Xuping Zhang,Yongsheng Yang

DOI: https://doi.org/10.1109/JLT.2021.3112170

IF: 4.7

2022-01-01

Journal of Lightwave Technology

Abstract:In this paper, we demonstrate the transmission spectral and surrounding refractive index (SRI) sensing performance of long-period fiber gratings (LPFGs) at 2 mu m waveband. The cladding modes operating at 2 mu m waveband show higher SRI sensitivity than 1.55 mu m waveband. The influence of a little off resonance region of grating period, refractive index modulation and duty cycle of gratings are analyzed theoretically. Additionally, the LPFGs of LP08 mode near dispersion turning point operating at 2 pm waveband are investigated theoretically and experimentally. Mode splitting brings out with the increasing SRI. After the resonant dip splitting into two dips (dip A and dip A'), the SRI sensitivity of dip A are measured to be as high as -8495.2 nm/RIU in the SRI region of 1.445-1.457. The proposed 2-mu m-waveband LPFGs makes it a potential in biochemical and environmental monitoring.
Periodic Micro-Structures in Optical Microfibers Induced by Plateau-Rayleigh Instability and Its Applications.

Li,Jin-Hui Chen,Fei Xu,Yan-Qing Lu

DOI: https://doi.org/10.1364/oe.25.004326

IF: 3.8

2017-01-01

Optics Express

Abstract:A periodic micro-structure on optical microfibers induced by Plateau-Rayleigh instability (PRI) was investigated and a potential application for long period gratings (LPGs) fabrication was given. The linear relation between the average periods of micro-structures and the diameters of optical microfibers was demonstrated first. By brushing a glass rod with a Teflon droplet suspended at the end tip along microfibers, a continuous film of Teflon was formed at once, then the film broke up into a series of periodic droplets due to PRI. Periodic Teflon nodes were left after the evaporation of the solvent. A LPG structure based on polymer was finally formed by this method on a microfiber with a diameter of 5.5 μm. An attenuation transmission dip of 15 dB around 1447 nm was achieved. Investigation of the strain and temperature response characteristics of the grating presented a strain sensitivity of -2.5 pm/με and a temperature sensitivity of -157 pm/°C. The technique proposed here provides a versatile technique for polymer-based LPGs fabrication. Benefiting from the high sensitivities, LPGs based on numerous polymers fabricated in this way could have potential applications in optical and biological sensing.
Tunable sensitivity in long period fiber gratings during mode transition with low refractive index intermediate layer

Ignacio Del Villar,Jorge Montoya-Cardona,Jos J. Imas,Erick Reyes-Vera,Carlos R. Zamarreo,Ignacio R. Matias,Jose L. Cruz,J.J. Imas,Carlos R. Zamarreno

DOI: https://doi.org/10.1109/jlt.2022.3226800

IF: 4.7

2022-01-01

Journal of Lightwave Technology

Abstract:Double-clad fibers where the second cladding has a lower refractive index than the first cladding, prove to be ideal structures for potentiating and tuning the sensitivity in long-period fiber gratings (LPFGs) operating in mode transition. When a thin film is deposited on the optical fiber, the second cladding performs acts as a barrier that initially prevents the transition to guidance in the thin film of one of the modes guided in the first cladding. Finally, the transition to guidance occurs with a sensitivity increase, in analogy to the tunnel effect observed in semiconductors. This improvement has been demonstrated both as a function of the thin film thickness and the surrounding medium refractive index, with enhancement factors of 4 and 2, respectively. This idea reinforces the performance of LPFGs, adding a new degree of freedom to the mode transition and the dispersion turning point phenomena. Moreover, the control of the variation of the effective index of cladding modes could be applied in other structures, such as tilted-fiber gratings or evanescent wave sensors.

engineering, electrical & electronic,optics,telecommunications
Analysis of diffraction gratings displayed in spatial light modulators at the Nyquist limit: Application to the triplicator grating

Shang Gao,María del Mar Sánchez-López,Ignacio Moreno

DOI: https://doi.org/10.1016/j.optlaseng.2024.108628

IF: 5.666

2024-10-09

Optics and Lasers in Engineering

Abstract:In this work we analyze diffraction gratings displayed on a pixelated spatial light modulator (SLM) at its spatial resolution limit (Nyquist limit) i.e., with largest diffraction angle, where the binary phase profile is the only alternative. Their implementation is influenced by the effect of a sinc envelope and the multiple replicas of the diffraction pattern that arise from the SLM pixelation, where the fill factor plays an essential role. We use the Fourier transform theory to analyze the binary phase grating in a pixelated device in terms of the pixel size, fill factor and phase difference between the two levels in the grating. This convolutional approach probes very useful to gain physical insight of the different contributions to the diffraction orders, and analytical expressions for the complex amplitude coefficients and intensities are obtained. Experimental verification is provided by encoding binary phase triplicator gratings with different periods on a high-resolution liquid-crystal on silicon SLM. The effect of the device pixelation and pixel crosstalk on the diffraction efficiency and on the conditions to obtain a Nyquist triplicator phase grating are studied. These results can be interesting for applications requiring programmable and large beam steering angles.

optics
A Study of Nano-Structural Effect on the Polarization Characteristics of Metallic Sub-Wavelength Grating Polarizers in Visible Wavelengths

Zongyao Yang,Bo Feng,Bingrui Lu,Yifang Chen,Wenhao Li,Wei Zhang,Tao Li

DOI: https://doi.org/10.1016/j.mee.2020.111327

IF: 2.3

2020-01-01

Microelectronic Engineering

Abstract:The structural effect of subwavelength gratings as the polarizer on the polarization characteristics in visible wavelengths (400-700 nm) is systematically investigated through both numerical simulation with Finite Difference Time Doman algorithm and experiments. The grating parameters such as the material, the pitch, the duty cycle, the height and the cross-sectional shape of the grating are addressed in this work. The optimized range for those parameters is worked out, based on the desired performance margin at the level of 70% transmittance and 50:1 for the extinction ratio. Polarization performance such as the transmittance over 70% and the extinction ratio above 50:1 has been experimentally demonstrated by the 200 nm pitched grating in Al with the height of 150 nm, which was fabricated by high resolution electron beam lithography in this work, guided by the simulation result. Au grating as the polarizer was also compared but ruled out in this work because of the poor performance in polarization. This work is essential in developing grating based polarizers for polarimetric detection and imaging in visible wavelengths.
Refractive index characteristics and mode splitting of long-period fiber gratings written in the tapered fiber

Chao ZHOU,Lei SHI,Fang ZOU,Yunqi LIU

DOI: https://doi.org/10.12066/j.issn.1007-2861.1778

2018-01-01

Abstract:Transmission characteristics of long-period fiber gratings (LPFGs) written in a tapered fiber is investigated by numerical simulation.It has been found that splitting of the mode distribution curve happens for the same order cladding mode of LPFG when the thinnest diameter of the tapered fiber is between 55 μm and 110 μm.The two resonance dips correspond to splitting from the same order cladding mode show different refractive index characteristics.
Photosensitive Polymer-Based Micro-Nano Long-Period Fiber Grating for Refractive Index Sensing

Yaxun Zhang,Xiaoxuan Wang,Xiaoyun Tang,Zhihai Liu,Yu Zhang,Chunyu Sha,Min Zhang,Wei Jin,Jianzhong Zhang,Libo Yuan

DOI: https://doi.org/10.1109/jlt.2021.3106651

IF: 4.7

2021-11-01

Journal of Lightwave Technology

Abstract:Yaxun Zhang, Xiaoxuan Wang, Xiaoyun Tang, Zhihai Liu, Yu Zhang, Chunyu Sha, Min Zhang, Wei Jin, Jianzhong Zhang, Libo YuanIn this paper, we propose and demonstrate a photosensitive polymer-based micro-nano long-period fiber grating (PPMN-LPFG) for refractive ... [J. Lightwave Technol. 39, 6952-6957 (2021)]

engineering, electrical & electronic,optics,telecommunications
Preface to the behavior of organisms.

B. Skinner

DOI: https://doi.org/10.1901/JEAB.1988.50-355

1988-09-01

Journal of the Experimental Analysis of Behavior

Abstract:
Electro-optical properties and frequency response of polymer-dispersed liquid crystal gratings doped with multi-walled carbon nanotubes

Yourong Liu,Jinrong Shen,Tong Shen,Jihong Zheng,Songlin Zhuang

DOI: https://doi.org/10.1007/s10853-021-06104-9

IF: 4.5

2021-04-23

Journal of Materials Science

Abstract:In this paper, a model developed for establishing the lowest possible driving voltage of Holographic polymer-dispersed liquid crystal (H-PDLC) based on the Maxwell–Wagner effect doped with specific nanotubes. The dependences of the turning point frequency on the doping concentration and the distribution of multi-walled carbon nanotubes (MWCNTs) are discussed. The MWCNTs can effectively adjust the relaxation frequency of grating, increase its LC droplet size, and decrease its dielectric permittivity. The diffraction efficiency and threshold voltage of the prepared switchable Bragg grating were found to reach 91% and 0.77 V μm−1, respectively, at 5 kHz. By comparing the results of experiments and simulations, we obtained the mass distribution ratio of MWCNTs in the LC and polymer regions. It was found that the MWCNTs diffuse into the LC regions during the polymerization process, and the use of a suitable driving frequency and doping concentration can minimize the driving voltage. This work provides a reference for studying the dynamic range optical tuning and polymerization kinetics of nanoparticles in switchable gratings.

materials science, multidisciplinary
Fine structure of Surface Relief Gratings: experiment and a generic stochastic Monte Carlo model of the photoinduced mass transport in azo-polymer

Grzegorz Pawlik,Antoni C. Mitus,Andrzej Miniewicz,Anna Sobolewska

DOI: https://doi.org/10.48550/arXiv.1309.2590

2013-09-11

Abstract:We study experimentally and theoretically a double-peak fine structure of Surface Relief Gratings in azo-functionalized poly(etherimide). For the theoretical analysis we develop a stochastic Monte Carlo model for photoinduced mass transport in azobenzene functionalized polymer matrix. The long sought-after transport of polymer chains from bright to dark places of the illumination pattern is demonstrated and characterized, various scenarios for the intertwined processes of build-up of density and SRG gratings are examined. Model predicts that for some azo-functionalized materials double-peak SRG maxima can develop in the permanent, quasi-permanent or transient regimes.

Soft Condensed Matter,Materials Science
Sensing properties of femtosecond laser-inscribed long period gratings in photonic crystal fiber

Kyriacos Kalli,Tom Allsop,Kaimin Zhou,Graham Smith,Michael Komodromos,David Webb,Ian Bennion

DOI: https://doi.org/10.1007/s13320-011-0013-8

IF: 2.814

2011-02-19

Photonic Sensors

Abstract:The use of near infrared, high intensity femtosecond laser pulses for the inscription of long period fiber gratings in photonic crystal fiber is reported. The formation of grating structures in photonic crystal fiber is complicated by the fiber structure that allows wave-guidance but that impairs and scatters the femtosecond inscription beam. The effects of symmetric and asymmetric femtosecond laser inscriptions are compared and the polarization characteristics of long period gratings and their responses to external perturbations are reported.

optics,instruments & instrumentation
Length Scale Dependence of Periodic Textures for Photoabsorption Enhancement in Ultra-thin Silicon Foils and Thick Wafers

K Kumar,A Khalatpour,G Liu,J Nogami,N P Kherani

DOI: https://doi.org/10.48550/arXiv.1606.01834

2016-06-06

Optics

Abstract:In this paper, we simulate a front surface inverted pyramidal grating texture on 2 to 400 micron thick silicon and optimize it to derive maximum photocurrent density from the cell. We identify a one size fits all front grating period of 1000 nm that leads to maximum photo-absorption of normally incident AM1.5g solar spectrum in silicon (configured with a back surface reflector) irrespective of the thickness of the crystalline silicon absorbing layer. With the identification of such universally optimized periodicity for the case of an inverted pyramidal grating texture, a common fabrication process can be designed to manufacture high-efficiency devices on crystalline silicon regardless of wafer thickness. In order to validate the results of the simulation, we fabricated high resolution inverted pyramidal textures on a 400 micron thick silicon wafer with electron beam lithography to compare the reflectance from submicron and wavelength scale periodic textures. The experimental reflectance measurements on textures confirm that a 1000 nm period grating texture performs better than a 500 nm period texture in reducing reflectance, in agreement with the simulations.

Bilocal Dynamics for Self-Avoiding Walks

Studies on Superprism Effects in Multilayer Thin Film Stacks

Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

Spectral polarization-dependent loss of cascaded long-period fiber gratings

Characterization of Dual-Periodic Structures with Optical Scattering

Turn Around Point Long Period Fiber Gratings With Coupling to Asymmetric Cladding Modes Fabricated by a Femtosecond Laser and Coated With Titanium Dioxide

pH-sensing properties of cascaded long- and short-period fiber grating with poly acrylic acid/poly allylamine hydrochloride thin-film overlays

High-sensitivity sensor design based on cascaded long-period fiber grating with film coating

Spectral and Sensing Performance of Long-Period Fiber Gratings at 2 m Waveband

Periodic Micro-Structures in Optical Microfibers Induced by Plateau-Rayleigh Instability and Its Applications.

Tunable sensitivity in long period fiber gratings during mode transition with low refractive index intermediate layer

Analysis of diffraction gratings displayed in spatial light modulators at the Nyquist limit: Application to the triplicator grating

A Study of Nano-Structural Effect on the Polarization Characteristics of Metallic Sub-Wavelength Grating Polarizers in Visible Wavelengths

Refractive index characteristics and mode splitting of long-period fiber gratings written in the tapered fiber

Photosensitive Polymer-Based Micro-Nano Long-Period Fiber Grating for Refractive Index Sensing

Preface to the behavior of organisms.

Electro-optical properties and frequency response of polymer-dispersed liquid crystal gratings doped with multi-walled carbon nanotubes

Fine structure of Surface Relief Gratings: experiment and a generic stochastic Monte Carlo model of the photoinduced mass transport in azo-polymer

Sensing properties of femtosecond laser-inscribed long period gratings in photonic crystal fiber

Length Scale Dependence of Periodic Textures for Photoabsorption Enhancement in Ultra-thin Silicon Foils and Thick Wafers