Abstract:In this paper, four conductive polyaniline powders doped in hydrochloric acid, sulfuric acid, phosphoric acid, and sulfonic acid were selected and blended with polydimethylsiloxane to prepare coatings with an electromagnetic absorption effect and fouling desorption effect, respectively. A UV spectrophotometer was used to evaluate the settling rate of the powders. Fourier transform infrared spectrometry, laser confocal microscopy, and scanning electron microscopy were used to observe the morphology and structure of the powder and the coating. The interface properties of the coatings were characterized using a contact angle measurement, the mechanical properties of the coatings using a tensile test, and the electromagnetic properties of the powders and microwave absorption properties of the coatings using vector network analyzers. Meanwhile, the antifouling performance of the coatings was evaluated via the marine bacteria adhesion test and benthic diatom adhesion test, and the effect of conductive polyaniline on the antifouling performance of the coating was analyzed. The results show that adding polyaniline reduced the surface energy of the coating and increased the roughness, mechanical properties and anti-fouling properties of the coating. Moreover, adding appropriate polyaniline powder can enhance the electromagnetic wave loss of the coating. The followings values were recorded for a hydrochloric-acid-doped polyaniline coating: lowest surface energy of 17.17 mJ/m2, maximum fracture strength of 0.95 MPa, maximum elongation of 155%, maximum bandwidth of 3.81 GHz, and peak of reflection loss of −23.15 dB. The bacterial detachment rate of the polydimethylsiloxane (PDMS) samples was only 30.37%. The bacterial adhesion rates of the composite coating containing hydrochloric-acid-doped polyaniline were 4.95% and 2.72% after rinsing and washing, respectively, and the desorption rate was 45.35%. The chlorophyll concentration values were 0.0057 mg/L and 0.0028 mg/L, respectively, and the desorption rate was 54.62%.

Surface modification of polyaniline using tetraethyl orthosilicate

Controllable synthesis and characterization of poly(aniline‐co‐pyrrole) using anionic spherical polyelectrolyte brushes as dopant and template

A Very Thin Layer of NiO, Ni(OH)2 Nanosheets Arrays with Organic Functional Modification of Polyaniline

Fabrication of one dimensional polyaniline nanofibers by UV-assisted polymerization in the aqueous phase.

Polyaniline on surface modification of diatomite: a novel way to obtain conducting diatomite fillers

Anticorrosive oligoaniline-containing electroactive siliceous hybrid materials

Composites of Electronically Conductive Polyaniline with Polyacrylate-Silica Hybrid Sol-Gel Materials

Surface Modification of TiO2 Nanoparticles by Polyaniline

Synthesis of Polyaniline/mcm‐41 Composite Through Surface Polymerization of Aniline

Polyaniline-Silica Composite Conductive Capsules And Hollow Spheres

Fabrication of Conducting Polyaniline‐coated Halloysite Coaxial Structure Nanocomposites Via in Situ Oxidative Graft Polymerization

Method for preparing water-soluble conductive polyaniline

Preparation, Characterization and Application of Polyaniline/Epoxide Polysiloxane Composite Films

Conducting polyaniline/poly(tetrafluoroethylene) composite films with tunable surface morphology and hydrophilicity

A facile strategy for synthesis of multilayer and conductive organo-silica/polystyrene/polyaniline composite particles.

Synthesis of Conducting Polyaniline with Photopolymerization Method and Characterization

The Effect of Conductive Polyaniline on the Anti-Fouling and Electromagnetic Properties of Polydimethylsiloxane Coatings

Preparation of polyaniline/sodium alanate hybrid using a spray-drying process

Water-soluble Self-Acid-doped Conducting Polyaniline: Poly(aniline- Co - N -Propylbenzenesulfonic Acid-Aniline)

A Facile and Efficient Route for Coating Polyaniline Onto Positively Charged Substrate

Synthesis of Novel Raspberrylike Silica/Polypyrrole Hybrids Based on Single Silica Particle