Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Tensile and impact properties of thermoplastic fibre hybrid composites based on air textured commingling hybrid yarns composed of carbon/aramid/polyamide 6 and carbon/glass/polyamide 6 filament yarns

Investigations on the development of impact-resistant thermoplastic fibre hybrid composites from glass and steel fibre

Impact of weave architecture on the mechanical performance of carbon-aramid/PVB hybrid composites

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Influence of Fiber Volume in Hybrid Short Glass/Cellulose Reinforced Thermoplastic Compounds

Influence of yarn-hybridisation on the mechanical performance and thermal conductivity of composite laminates

The Effect of Hybrid Thermal Fillers on Thermal Conductivity of Carbon Fiber Reinforced Polybutylene Terephthalate Composites

Thermal and Morphological Assessment of the Penta-Layered, Hybrid U-Polyester Composite Reinforced with Glass Fibers and Polypropylene

Mechanical behavior of carbon/glass polypropylene hybrid composites

Thermal Adsorption and Mechanical Behaviour of Polypropylene Hybrid Composite Synthesized by Glass/Hemp Fibre via an Injection Moulding Process

Hybrid fiber-reinforced composite with carbon, glass, basalt, and para-aramid fibers for light use applications

Effect of fiber hybridization types on the mechanical properties of carbon/glass fiber reinforced polymer composite rod

The synergistic effects of micro-and nano-fillers on the properties of polyamide 11/poly (lactic acid) blend

Short fibre/unidirectional hybrid thermoplastic composites: Experimental characterisation and digital analysis

Study on impact properties of carbon/kevlar fiber hybrid composites

Characterization and prediction of tensile properties of carbon fiber-reinforced thermoplastics composed of hybrid short carbon fiber/PA6 fiber nonwoven mats

Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites

A Comparative Analysis of Tensile Characteristics of Epoxy Composites: Assessing TWARMAT, Woven Glass, and Woven Carbon Fiber Reinforcements

Enhancement of mechanical and structural characteristics through the hybridization of carbon fiber with Cordia‐dichotoma/polyester composite

Multifunctional Hybrid Composites with Enhanced Mechanical and Thermal Properties Based on Polybenzoxazine and Chopped Kevlar/Carbon Hybrid Fibers

Properties of basalt/aramid fiber reinforced hybrid composites compared to carbon fiber composites