Abstract:This paper proposes a novel approach that employs error amplification and ADC-based dual-mixer time-difference (ADC-based-DMTD) technique for high-precision locking of laser repetition frequency with compact size. This electronic system consists of two main components: a digitized error amplification module (EAM) and an FPGA-based digital frequency locking module (DFLM). The EAM mainly integrates a configurable frequency generator (CFG), a configurable frequency multiplier (CFM) and a mixer to process the laser pulses and a high-stability reference source (e.g., an atomic clock), enabling high-precision locking of pulse lasers operating at different repetition frequencies. By employing frequency multiplication and mixing, the EAM amplifies the laser's frequency error and performs frequency down-conversion, enhancing measurement sensitivity and reducing the hardware requirements of the back-end. The DFLM receives the EAM outputs by using an ADC-based-DMTD method to precisely measure frequency errors, then the digital proportional-integral-derivative (PID) controller provides feedback to achieve accurate frequency locking. Initial testing with a voltage-controlled oscillator (VCO) demonstrated excellent locking performance, achieving an Allan deviation of $9.58 \times 10^{-14}$ at 10 seconds and a standard deviation (STD) of 7.7 \textmu Hz root mean square (RMS) after locking, marking a five-order-of-magnitude stability enhancement. In laboratory experiments with a custom-built femtosecond fiber laser, the system achieved robust locking of the repetition frequency, with a stability improvement from $1.51 \times 10^{-7}$ to $1.12 \times 10^{-12}$ at a 10-second gate time and an STD of 0.43 mHz RMS after locking.

Compact embedded device for lock-in measurements and experiment active control

Design of multi-functional portable electronic experimental box based on Labview and ARM

Microcontroller-based locking in optics experiments

Feedback lock-in: A versatile multi-terminal measurement system for electrical transport devices

A simple laser locking system based on a field-programmable gate array

A Digital and Compact High-Precision Locking System for Pulse Laser Repetition Frequency

A flexible control system for atomic, molecular and optical physics experiments

A Compact and Universal Digital Lock-in Amplifier Design for Broad Optical Spectrum Capturing

Research and Implementation of the Key Technology of Digital Lock-in Amplifier

A flexible and scalable, fully software-based lock-in amplifier for nonlinear spectroscopy

A Novel Digital&#x0A0;&#x0A0;Lock-in Amplifier with Dual Channels

An open and flexible digital phase-locked loop for optical metrology

Single Power Supply, Compact, Self-Adaptive Dynamic Range Lock-In Amplifiers

Design and Manufacture of Lock-in Amplifier

A low-cost and reliable laser shutter interlock using a software-command interface

A Digital Optical Phase-Locked Loop For Diode Lasers Based On Field Programmable Gate Array

Dual-phase digital lock-in implementation based on Nyquist rate and sampling subtraction

Development and Test of Low-Cost Multi-Channel Multi-Frequency Lock-In Amplifier for Health and Environment Sensing

Instrumentation for laser physics and spectroscopy using 32-bit microcontrollers with an Android tablet interface

A Low-Cost, Fpga-Based Servo Controller with Lock-In Amplifier

A microcontroller based self-locking laser system