Abstract:Purpose: Computational fluid dynamics (CFD) and 4D-flow magnetic resonance imaging (MRI) are synergically used for the simulation and the analysis of the flow in a patient-specific geometry of a healthy thoracic aorta. Methods: CFD simulations are carried out through the open-source code SimVascular. The MRI data are used, first, to provide patient-specific boundary conditions. In particular, the experimentally acquired flow rate waveform is imposed at the inlet, while at the outlets the RCR parameters of the Windkessel model are tuned in order to match the experimentally measured fractions of flow rate exiting each domain outlet during an entire cardiac cycle. Then, the MRI data are used to validate the results of the hemodynamic simulations. As expected, with a rigid-wall model the computed flow rate waveforms at the outlets do not show the time lag respect to the inlet waveform conversely found in MRI data. We therefore evaluate the effect of wall compliance by using a linear elastic model with homogeneous and isotropic properties and changing the value of the Young's modulus. A stochastic analysis based on the polynomial chaos approach is adopted, which allows continuous response surfaces to be obtained in the parameter space starting from a few deterministic simulations. Results: The flow rate waveform can be accurately reproduced by the compliant simulations in the ascending aorta; on the other hand, in the aortic arch and in the descending aorta, the experimental time delay can be matched with low values of the Young's modulus, close to the average value estimated from experiments. However, by decreasing the Young's modulus the underestimation of the peak flow rate becomes more significant. As for the velocity maps, we found a generally good qualitative agreement of simulations with MRI data. The main difference is that the simulations overestimate the extent of reverse flow regions or predict reverse flow when it is absent in the experimental data. Finally, a significant sensitivity to wall compliance of instantaneous shear stresses during large part of the cardiac cycle period is observed; the variability of the time-averaged wall shear stresses remains however very low. Conclusions: In summary, a successful integration of hemodynamic simulations and of MRI data for a patient-specific simulation has been shown. The wall compliance seems to have a significant impact on the numerical predictions; a larger wall elasticity generally improves the agreement with experimental data.

Simulation of unsteady blood flows in a patient-specific compliant pulmonary artery with a highly parallel monolithically coupled fluid-structure interaction algorithm

A Novel Physics-Based Model for Fast Computation of Blood Flow in Coronary Arteries

High-resolution cerebral blood flow simulation with a domain decomposition method and verified by the TCD measurement

High Resolution Patient-Specific Blood Flow Simulation in a Full-Size Aneurysmal Aorta Based on a Parallel Two-Level Method

Blood Flow Simulation, Patient-Specificin-vivo

Patient-Specific Numerical Simulations of Coronary Artery Hemodynamics and Biomechanics: A Pathway to Clinical Use

A novel multiblock immersed boundary method for large eddy simulation of complex arterial hemodynamics

Physics-constrained coupled neural differential equations for one dimensional blood flow modeling

A GPU-accelerated 3D ISPH-TLSPH Framework for Patient-Specific Simulations of Cardiovascular Fluid-Structure Interactions

Patient Specific Hemodynamics: Combined 4d Flow-Sensitive Mri And Cfd

Viscous Flow Simulation in a Stenosis Model Using Discrete Particle Dynamics: a Comparison Between DPD and CFD.

A one-dimensional computational model for blood flow in an elastic blood vessel with a rigid catheter

Validation of Numerical Simulations of Thoracic Aorta Hemodynamics: Comparison with In Vivo Measurements and Stochastic Sensitivity Analysis

Simulating cyclic artery compression using a 3D unsteady model with fluid–structure interactions

On the Impact of Fluid Structure Interaction in Blood Flow Simulations: Stenotic Coronary Artery Benchmark

Immersed Smoothed Finite Element Method for Fluid–structure Interaction Simulation of Aortic Valves

Numerical simulation of two-phase non-Newtonian blood flow with fluid-structure interaction in aortic dissection

Medical Image-Based Computational Fluid Dynamics and Fluid-Structure Interaction Analysis in Vascular Diseases

Vascular fluid-structure interaction: unified continuum formulation, image-based mesh generation pipeline, and scalable fully implicit solver technology

A highly parallel algorithm for simulating the elastodynamics of a patient-specific human heart with four chambers using a heterogeneous hyperelastic model

Shape Design of an Artificial Pump-Lung Using High-Resolution Hemodynamic Simulation with High-Performance Computing