Abstract:Nanofiltration(NF) membrane has been developed from the late 1980s and widely applied in the separation of liquid mixtures. Several models for NF process have been proposed, such as the pore model based on the sieving effect, the charge models based on the electrostatic effect, and the electrostatic steric-hindrance model and the Donnan steric pore model based on the both effects, which play an important role in understanding the separation mechanism and promoting the application of NF. However, the performances of these NF membranes with features of "loose RO membranes" cannot be predicted by commercial RO simulation software, which is a severe restriction on straightforward implementation of large-scale NF applications. In regard to these problems, a model was proposed for the separation performance of mixed salts solution across NF membranes to promote the application of NF during the water treatment in the light of the competitive effect among co-ions and regulation effect among counter-ions. Both two effects can be determined by some specific experiments. Recently, based on the indepth experimental studies on rejection performance and the attendant electrokinetic properties, some researchers have found that the performance of NF membranes cannot be predicted completely by merely considering the sieving and electrostatic effect, but some drawbacks still exist in the analysis of electrokinetic properties. The further studies have contributed to a deeper understanding on the particular effect caused by the nano-scale pore size and charge features caused by the complicated interaction in solution. Moreover, the dielectric effect in the transport process of ions through NF membranes has been addressed and quantitatively analyzed.

Separation of ions with equivalent and similar molecular weights by nanofiltration: Sodium chloride and sodium acetate as an example

Organic Solvent Nanofiltration with Nanoparticles Aggregation Based on Electrostatic Interaction for Molecular Separation

Membranes with Negatively-Charged Nanochannels Fabricated from Aqueous Sulfonated Polysulfone Nanoparticles for Enhancing the Rejection of Divalent Anions

Zero liquid discharge hybrid membrane process for separation and recovery of ions with equivalent and similar molecular weights

Selective Separation of Chloride and Sulfate by Nanofiltration for High Saline Wastewater Recycling

Experimental investigation on separation performance of nanofiltration membranes for inorganic electrolyte solutions

Theoretical investigation on the separation characteristics of electrolyte solutions with the nanofiltration membranes (I): Single electrolyte solutions

The possibility of separating saccharides from a NaCl solution by using nanofiltration in diafiltration mode

Separation performance of a nanofiltration membrane influenced by species and concentration of ions

Sodium hypochlorite activated dual-layer hollow fiber nanofiltration membranes for mono/divalent ions separation

Separation Performance of Nanofiltration Membranes for Binary Electrolyte Solutions

Tailoring nanofiltration membranes for effective removing dye intermediates in complex dye-wastewater

Comparison of the Mg2+-Li+ Separation of Different Nanofiltration Membranes

The Application of the Nanofiltration Membrane NF270 for Separation of Fermentation Broths

Separation of Saccharides and Salts by Using Nanofiltration Membranes

Desalination and recovery of iminodiacetic acid (IDA) from its sodium chloride mixtures by nanofiltration

Nanofiltration Understanding: A Separation Process of Molecular-Level with Nano-Scale Effect

Integrating binary organic phosphonic acid into nanofiltration membrane for high precision separation of mono-/divalent anions

Enhancing nanofiltration performance for antibiotics/NaCl separation via water activation before microwave heating

Scalable nanofiltration membranes with sharpened pore distribution and enhanced negativity for mono/divalent anion separation

Enhancing Ion Separation Efficiency: Janus Charged Nanofiltration Membrane Fabricated via Polyethyleneimine-Manipulated Interfacial Polymerization