Capillarity-Driven Oil Flow in Nanopores: Darcy Scale Analysis of Lucas-Washburn Imbibition Dynamics

Simon Gruener,Patrick Huber

DOI: https://doi.org/10.1007/s11242-018-1133-z

2018-08-06

Abstract:We present gravimetrical and optical imaging experiments on the capillarity-driven imbibition of silicone oils in monolithic silica glasses traversed by 3D networks of pores (mesoporous Vycor glass with 6.5 nm or 10 nm pore diameters). As evidenced by a robust square-root-of-time Lucas-Washburn (L-W) filling kinetics, the capillary rise is governed by a balance of capillarity and viscous drag forces in the absence of inertia and gravitational effects over the entire experimental times studied, ranging from a few seconds up to 10 days. A video on the infiltration process corroborates a collective pore filling as well as pronounced imbibition front broadening resulting from the capillarity and permeability disorder, typical of Vycor glasses. The transport process is analyzed within a Darcy scale description, considering a generalized pre-factor of the L-W law, termed Lucas-Washburn-Darcy imbibition ability. It assumes a Hagen-Poiseuille velocity profile in the pores and depends on the porosity, the mean pore diameter, the tortuosity and the velocity slip length and thus on the effective hydraulic pore diameter. For both matrices a reduced imbibition speed and thus reduced imbibition ability, compared to the one assuming the nominal pore diameter, bulk fluidity and bulk capillarity, can be quantitatively traced to an immobile, pore-wall adsorbed boundary layer of 1.4 nm thickness. Presumably, it consists of a monolayer of water molecules adsorbed on the hydrophilic pore walls covered by a monolayer of flat-laying silicone oil molecules. Our study highlights the importance of immobile nanoscopic boundary layers on the flow in tight oil reservoirs as well as the validity of the Darcy scale description for transport in mesoporous media.

Soft Condensed Matter,Mesoscale and Nanoscale Physics,Materials Science,Chemical Physics,Fluid Dynamics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the characteristics of capillary - driven oil flow in nanopores. Specifically, the author experimentally studied the capillary - driven infiltration process of silicone oil in monolithic silica glass (Vycor glass) with a three - dimensional pore network. The main purposes of the study are:

1. **Verify the classical theory**: Verify whether the dynamics of spontaneous infiltration in nanoporous media follows the classical Lucas - Washburn law, especially when considering the Darcy - scale description.
2. **Analyze influencing factors**: Explore the influence of pore diameter, fluid viscosity, pore tortuosity, and pore - wall adsorption layer on the infiltration speed.
3. **Quantify the boundary - layer effect**: Quantify the influence of the immobile boundary layer (composed of water molecules and silicone oil molecules) on the pore wall on the infiltration dynamics.

### Main research contents

- **Experimental materials and methods**:
- Use two Vycor glasses (V5 and V10) with different pore diameters, which are 6.5 nm and 10 nm respectively.
- Select two silicone oils (DC704 and DC705) as the infiltration liquids. These silicone oils have different viscosities and surface tensions.
- Record the infiltration process of silicone oil in Vycor glass by gravimetric measurement and optical imaging techniques.

- **Theoretical model**:
- Adopt the Darcy - scale description and combine it with the Lucas - Washburn law to derive the relationship between the infiltration height and time:
\[
h(t)=\sqrt{\frac{\sigma \cos \theta}{2 \phi_i \eta \Gamma}} \sqrt{t}
\]
where \(\sigma\) is the surface tension, \(\eta\) is the fluid viscosity, \(\rho\) is the fluid density, \(\phi_i\) is the initial porosity, \(\theta\) is the contact angle, and \(\Gamma\) is the Lucas - Washburn - Darcy infiltration capacity, defined as:
\[
\Gamma=\frac{r_h^2}{r_0} \sqrt{\frac{\phi_0}{\tau r_L}}
\]
where \(r_h\) is the effective hydraulic pore diameter, \(r_0\) is the nominal pore diameter, \(\tau\) is the pore tortuosity, and \(r_L\) is the pore - diameter length.

- **Experimental results**:
- The experimental results show that the infiltration dynamics conforms to the \(\sqrt{t}\) law, indicating that in nanopores, capillary force and viscous resistance are the main controlling factors.
- By analyzing the infiltration capacity \(\Gamma\), it is found that there is an immobile boundary layer about 1.4 nm thick on the pore wall, which is composed of adsorbed water molecules and silicone oil molecules and significantly reduces the infiltration speed.

### Conclusions

- **Verify the classical theory**: The experimental results support that the dynamics of spontaneous infiltration in nanoporous media can be described by the Lucas - Washburn law.
- **Quantify the boundary - layer effect**: The immobile boundary layer on the pore wall significantly affects the infiltration speed, and this finding is consistent with the results of previous experimental and simulation studies.
- **Future research directions**: Further study the influence of the polarity and hydration state of the pore media on fluid transport, and use other techniques (such as quasi - elastic neutron scattering and nuclear magnetic resonance) to study the self - diffusion behavior of oil molecules in order to understand the fluid dynamics in nanopores more deeply.

This research not only provides important experimental data for understanding fluid transport in nanopores, but also provides theoretical support for applications in petroleum geology, catalysis, filtration and other fields.