Abstract:The Tangential-Displacement Normal-Normal-Stress (TDNNS) method is a finite element method that was originally introduced for elastic solids and later extended to piezoelectric materials. It uses tangential components of the displacement and normal components of the normal stress vector as degrees of freedom for elasticity. For the electric field, the electric potential is used. The TDNNS method has been shown to provide elements which do not suffer from shear locking. Therefore thin structures (e.g. piezoelectric patch actuators) can be modeled efficiently. Hexahedral and prismatic elements of arbitrary polynomial order are provided in the current contribution. We show that these elements can be used to discretize curved, shell-like geometries by curved elements of high aspect ratio. The order of geometry approximation can be chosen independently from the polynomial order of the shape functions. We present two examples of curved geometries, a circular patch actor and a radially polarized piezoelectric semi-cylinder. Simulation results of the TDNNS method are compared to results gained in ABAQUS. We obtain good results for displacements and electric potential as well as for stresses, strains and electric field when using only one element in thickness direction.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop an effective finite - element method for simulating piezoelectric structures with complex geometries (especially thin, curved or shell - like structures) and avoid common numerical locking problems (such as shear locking). Specifically, the authors introduce and extend the Tangential - Displacement Normal - Normal - Stress (TDNNS) method to deal with the mechanical and electrical coupling problems in piezoelectric materials. The following are the key points of the paper: 1. **Avoiding Shear Locking**: - Traditional finite - element methods are prone to the shear - locking phenomenon when simulating thin structures, resulting in inaccurate calculation results. The TDNNS method effectively avoids this problem by using tangential displacement and normal stress as degrees of freedom. 2. **High - Order Geometric Approximation**: - The paper proposes a method that can accurately approximate complex geometries (such as curved piezoelectric structures) while maintaining a low number of elements. This makes it possible to model curved structures with high aspect ratios. 3. **Multi - Physical Field Coupling**: - Piezoelectric materials involve the coupling between mechanical deformation and electric fields. The TDNNS method can handle these two physical fields simultaneously and ensure the accuracy of the solution. 4. **Efficient Computation**: - By using the TDNNS method, good results of displacement, electric potential, stress, strain and electric field can be obtained even when only one element is used in the thickness direction. This greatly reduces the computational cost. 5. **Eigenvalue Problem Solving**: - The paper also discusses how to use the inverse iteration method to solve the eigenvalue problem of the coupled electromechanical system, which is very important for studying vibration characteristics. ### Formula Summary - **Stress - Strain Relationship**: \[ \sigma = C_E : \varepsilon - e^T \cdot E \] \[ D = e : \varepsilon + \epsilon_\varepsilon \cdot E \] - **Variational Formula**: \[ \int_{\Omega} (-S_E : \sigma + d^T \cdot \nabla \phi) : \delta \sigma \, d\Omega + \langle \varepsilon(u), \delta \sigma \rangle + \langle \varepsilon(\delta u), \sigma \rangle + \int_{\Omega} (d : \sigma - \epsilon_\sigma \cdot \nabla \phi) \cdot \nabla \delta \phi \, d\Omega = \int_{\Omega} f \cdot \delta u \, d\Omega \] - **Inverse Iteration Eigenvalue Problem**: \[ A \cdot q_k = \lambda_k M \cdot q_k \] \[ A \cdot q^{n + 1}_k = \lambda^n_k M \cdot q^n_k \] \[ \lambda(q) = \frac{q^T \cdot A \cdot q}{q^T \cdot M \cdot q} \] Through these improvements, the TDNNS method provides a powerful tool for the efficient and accurate simulation of piezoelectric structures.

3D mixed finite elements for curved, flat piezoelectric structures

New mixed finite elements for the discretization of piezoelectric structures or macro-fibre composites

The elastic and electric fields for three-dimensional contact for transversely isotropic piezoelectric materials

The Fundamental Solutions For Transversely Isotropic Piezoelectricity And Boundary Element Method

The Transient Responses of Piezoelectric Hollow Cylinders for Axisymmetric Plane Strain Problems

On the equilibrium of piezoelectric bodies of revolution

Dynamic solution of a multilayered orthotropic piezoelectric hollow cylinder for axisymmetric plane strain problems

Dynamics and Control of Adaptive Nonlinear Piezothermoelastic Structures with Coupled Electric, Thermal and Mechanical Fields: A Finite Element Approach

On Three-Dimensional Layered Piezoelectric Shell Elements for Design Simulation of Adaptive Structures

Large deformation mixed finite elements for smart structures

Control of Static Shape, Dynamic Oscillation, and Thermally Induced Vibration of Nozzles

Dynamics and Active Control of Largely Deflected Active Structures Using the Finite Element Technique

Piezothermoelasticity and Precision Control of Piezoelectric Systems: Theory and Finite Element Analysis

A novel 3D mixed finite element for flexoelectricity in piezoelectric materials

A Thin Piezoelectric Hexahedron Finite Element Applied to Design of Smart Continua

Numerical framework for anisotropic flexible piezoelectrics with large deformation

Structronics and Actuation of Hybrid Electrostrictive/Piezoelectric Thin Shells

Piezothermoelastic Characteristics and Control of Active Piezoelectric Structures

Distributed sensor signal analysis of double-curvature piezoelectric laminated thin shell based on finite difference

3D meshless modeling of piezoelectric structure based on the radial point interpolation method

Generalized finite difference method for electroelastic analysis of three-dimensional piezoelectric structures