Theoretical and Simulation Study of 'Comb' Electron beam and THz generation

V. Joshi,J. Karmakar,N. Kumar,B. Karmakar,S. Tripathi,S. Ghosh,R. K. Bhandari,D. Kanjilal,Aruna Asaf Ali Marg,A. Aryshev,J. Urakawa

DOI: https://doi.org/10.1016/j.nima.2018.10.072

2018-06-12

Abstract:A compact accelerator based super-radiant THz source is under development at Inter University Accelerator Centre (IUAC), New Delhi. The facility is based on the principle of pre-bunched Free Electron Laser (FEL) which will produce THz radiation in the range of ~0.18 to 3 THz from a modulated electron beam. A photocathode electron gun will generate a short train of microbunches (a "comb" beam) driven by a fiber laser system capable of producing multi micro-pulse laser beam with variable separation ( "comb" laser pulse). Upon acceleration, the electron beam will be injected in to a compact undulator magnet tuned to the same frequency as the separation of the electron micro-bunches. The paper discusses the process of enhancement of super-radiant emission of radiation due to modulation in the comb beam and the conditions required to achieve maximum enhancement of the radiation power. The feasibility study of generating a comb beam at the photocathode and its transport through the beamline while preserving its temporal structure has been reported. To evaluate the characteristics of the radiation emitted from the comb beam, a C++ based particle tracker and Lienard-Wiechert field solver has been developed. The conceptual understanding of the emission of radiation from comb beam is shown to conform with the numerical results. The code has been used to calculate the radiation pulse energy emitted into the central cone of undulator for various comb beam configurations.

Accelerator Physics

What problem does this paper attempt to address?

This paper aims to solve the problem of how to generate terahertz (THz) radiation using the "comb" electron beam. Specifically, the research objective is to develop a compact accelerator - based super - radiative THz source that can produce continuously tunable, narrow - band, multi - cycle, and coherent THz pulses with a frequency range between approximately 0.18 and 3 THz. This objective is achieved in the following ways:

1. **Generation of the comb - like electron beam**: Use a photocathode electron gun to generate a series of super - radiative micro - beams (i.e., the "comb" electron beam) by time - modulating the incident optical laser, thus avoiding the need for a magnetic chicane to compress the electron beam and reducing the size of the beamline.

2. **Transmission and optimization of the comb - like electron beam**: Studied how to transmit the comb - like electron beam from the photocathode to the exit of the undulator while maintaining its temporal structure, ensuring:
- The minimum y - axis size
- The minimum energy spread \( \Delta E \)
- The minimum emittance
- The maximum average bunching factor of the electron beam
- The maximum individual bunching factor of each micro - beam in the comb - like electron beam

3. **Conditions for radiation enhancement**: Discussed the conditions required to enhance super - radiative emission, especially by adjusting the electron energy in the undulator and changing the gap of the undulator magnets to adjust the radiation frequency \( \lambda_r \) to the range of 0.18 to 3.0 THz. The radiation wavelength \( \lambda_r \) can be calculated by the following formula:
\[
\lambda_r=\frac{\lambda_u}{2\gamma^2\left(1 + \frac{K^2}{2}+\gamma^2\theta^2\right)}
\]
where \( K = 0.934B_u [T]\lambda_u [cm] \) is the undulator parameter, \( \lambda_u \) is the undulator period, \( B_u \) is the peak magnetic field on the undulator axis, \( \gamma \) is the relativistic factor of the electron, and \( \theta \) is the angle of observing the radiation.

4. **Simulation and verification**: Developed a C++ - based particle tracker and Liénard - Wiechert field solver to calculate the radiation characteristics of the electron beam in the undulator and verify the theoretical model. Simulation results show that by adjusting the parameters of the comb - like electron beam, the radiation power can be significantly increased.

In conclusion, through theoretical analysis and numerical simulation, this paper explores how to use the comb - like electron beam to generate efficient and high - brightness THz radiation, providing important theoretical and technical support for the future development of THz technology.