Abstract:The paper studies the effectiveness of joint application of active and passive space debris removal technologies in low–Earth orbits An active spacecraft-collector (SC), equipped with several detachable thruster deorbiting kits (TDKs), ensures the capture of the stage. The TDK of dry mass about 90 kg should be fixed in the stage nozzle undocking from the SC, the TDK executes a deorbiting velocity impulse in order to form an elliptical disposal orbit with a predicted lifetime of 25 years in compliance with ISO standard requirements. However, many experts have recently called for a significant enhancement of these requirements. One of the ways to reduce the lifetime of the resulting disposal orbit is to equip the TDK with an aerodynamic decelerator, which has a shape of a spherical balloon. After the deorbiting impulse is applied, the balloon is supercharged by the gas remaining in the pressurized-propellant feed system of the TDK. Rigidization of the balloon shell is carried out by supercharging it above the yield point The most rational balloon diameters are chosen based on the analysis of its effect on the lifetime of the disposal orbit. If the detachable TDK is equipped with an inflatable balloon, one can consider the combined and hybrid braking schemes. According to the first scenario, the balloon of diameter 12-14 m ("Zenith-2" case) or 7-8 m ("Kosmos-3M" case) is inflated in the already formed 25-year disposal orbit reducing its lifetime to about 5 years, while the dry mass of each TDK increases by 28 kg and 10 kg, respectively. Within the second scenario, a noticeably smaller deorbiting impulse results in a hybrid disposal orbit, which exists for 25 years due to subsequent inflation of the balloon of almost the same size. An analysis shows that the combined braking scheme is more preferable: with an insignificant increase in the SC launch mass, it does not create additional risks of failure and quickly deorbits the object from the most populated altitudes.

Exploiting dynamical perturbations for the end-of-life disposal of spacecraft in LEO

Medium Earth Orbit dynamical survey and its use in passive debris removal

On the predictability of Galileo disposal orbits

Re-entry prediction and demisability analysis for the atmospheric disposal of geosynchronous satellites

Advanced Inflatable De-Orbit Solutions for Derelict Satellites and Orbital Debris

On the Arnold diffusion mechanism in Medium Earth Orbit

Dynamical Lifetime Survey of Geostationary Transfer Orbits

Dynamical taxonomy of the coupled solar radiation pressure and oblateness problem and analytical deorbiting configurations

Mission lifetime optimisation with self or assisted disposal

Application of additional inflatable aerodynamic device to ensure the required degradation of the disposal orbit of large-size space debris

Preliminary Trajectory Design for Mitigating Debris Utilizing Solar Sailing and Conventional Propulsion

Incremental model predictive control for satellite de-orbiting based on drag modulation

Towards a sustainable exploitation of the geosynchronous orbital region

De-orbiting Small Satellites Using Inflatables

Preliminary design of a space debris removal mission in LEO using a solar sail

Efficient trajectory design for distant planetary orbiters

Optimisation of VLEO Satellite Geometries for Drag Minimisation and Lifetime Extension

Designing Low-Thrust Transfers to High-Inclination Science Orbits via Hybrid Optimization

Reduction of Saturn Orbit Insertion Impulse using Deep-Space Low Thrust

Defunct Satellites in Nearly Polar Orbits: Long-term Evolution of Attitude Motion

Constrained optimisation of preliminary spacecraft configurations under the design-for-demise paradigm