Abstract:Densely deployed light emitting diodes (LEDs) typically lead to high spatial correlation in multiple-input multiple-output (MIMO) visible light communication (VLC) systems. Although precoding can effectively alleviate the spatial correlation issue, most existing precoding algorithms require a dedicated baseband chain for each LED, leading to high energy consumption and hardware complexity when a large number of LEDs are used. In this paper, a successive interference cancellation (SIC)-based precoding scheme with sub-connected architecture (SIC-SA) is proposed. In the considered model, each baseband chain is connected to an LED sub-array containing multiple LEDs to reduce the complexity. Since, in this case, SIC-based precoding can only determine the signal of each baseband chain for an LED sub-array, while its target is to mitigate the spatial correlation between individual LEDs, the electrical/optical power of each LED must also be jointly optimized to accomplish the target. This joint SIC-based precoding, power allocation, and direct current offset design problem is formulated as an achievable sum rate maximization problem under dimming control and electrical power constraints. A two-step iterative algorithm is proposed to solve this problem. In the first step, the SIC-based precoding is designed to alleviate the multi-user interference. In the second step, the power allocation of LEDs is optimized by matrix decomposition and convex optimization, and a closed-form solution of DC offset is derived. Furthermore, considering the dynamic scenarios, a SIC-based precoding scheme with dynamic sub-connected architecture (SIC-DSA) is proposed, in which a switch network is used to adaptively adjust the LED sub-array structure based on the channel state information. Simulation results show that the proposed SIC-SA and SIC-DSA respectively achieve 0.1340 bps/Hz/W and 0.1305 bps/Hz/W energy efficiency gains over the zero-forcing precoding scheme with SA, when the signal-to-noise ratio is 30 dB.

LED Selection and MAP Detection for Generalized LED Index Modulation

Joint SIC-Based Precoding and Sub-Connected Architecture Design for MIMO VLC Systems

Flexible LED Index Modulation for MIMO Optical Wireless Communications

Joint LED Selection and Precoding Optimization for Multiple-User Multiple-Cell VLC Systems

Linear Transceiver Designs for MIMO Indoor Visible Light Communications under Lighting Constraints

Spectrum-Efficient Index Modulation with Improved Constellation Mapping

Performance Analysis and Optimization for Visible Light Communication with Spatial Modulation.

Spatial Multiplexing MIMO Visible Light Communications with Densely Distributed LEDs and PDs

Detection and performance analysis for MIMO visible light communication system using joint optical spatial and pulse amplitude width modulation

Visible Light Communications Using OFDM and Multiple LEDs

Machine learning assisted LEDs combination selection and user matching of RISs enabled GSSK-VLC system

Indoor Visible Light Communication System Based on Non-Orthogonal Multiple Access

Multi-layer Coding and Map-assisted Partial Group Decoding for Multi-color Multi-user Visible Light Communication

Research of Multi-Dimensional Multiplexing Schemes in Visible Light Communication

Experimental MIMO VLC Systems Using Tricolor LED Transmitters and Receivers

Comparison of DCO-OFDM and M-PAM for LED-Based Communication Systems

A Ppm-Based Four-Dimensional Modulation Scheme For Visible Light Communications

Extreme Learning Machine-Based Receiver for MIMO LED Communications

Multi-Element VLC Networks: LED Assignment, Power Control, and Optimum Combining

A Multi-Feature LED Bit Detection Algorithm in Vehicular Optical Camera Communication

Spectral-Efficient Hybrid Dimming Scheme for Indoor Visible Light Communication: A Subcarrier Index Modulation Based Approach