Abstract:Near-infrared region of optical spectrum extends from 0.7 to 2.5 mu m and can be used for quantitative measurement of organic functional groups, especially C-H, O-H, N-H and C=O. Analyzing sample concentration by near infrared spectroscopy focuses on the design of the optical sensor and the spectral data processing. Noninvasive blood glucose measurement methods using near-infrared spectroscopy usually apply a beam of light to irradiate the blood region of human, and then extract the information of blood glucose from the spectrum. The key is to improve the signal to noise ratio so that very low glucose absorption can be detected. In this paper, according to the absorption of glucose, a noninvasive blood glucose measurement system based on three wavelengths in the near-infrared region was designed. The system included several important parts such as the light source, the optical chopper, the detector and the lock-in amplifier. The three wavelengths were respectively chosen at the signal wavelength 1610nm by glucose absorption peak in the overtone band and the reference wavelengths 1200/1350nm to eliminate the interference effect. The optical probe used an annular light bundle to greatly increase the intensity of incidence light and improve the signal-noise ratio. Two group experiments of glucose aqueous solutions with different concentration interval in the normal human physiological blood glucose range (0-500mg/dL) have been done to evaluate the predictive performance of the system. In these group experiments, the partial least square algorithm was used to predict the glucose concentration. The preliminary results showed when the interval was 100mg/dL, the correlation coefficient (R) was 0.998 and the root mean square error of prediction (RMSEP) was 17.08mg/dL; and when the interval was 20mg/dL, the values of R and RMSEP were 0.959 and 23.22mg/dL, respectively.

Blood Glucose Measurement Based on Infra-Red Spectroscopy

Noninvasive Blood Glucose Analysis Based on Near-Infrared Reflectance Spectroscopy

A PRACTICAL NONINVASIVE BLOOD GLUCOSE MEASUREMENT SYSTEM USING NEAR-INFRARED SENSORS

Near Infrared Spectral Methods for Non-Invasively Measuring Blood Glucose

Reagentless Near-Infrared Determination of Glucose in Whole Blood Using Multivariate Calibration

An Accurate Noninvasive Blood Glucose Measurement System Using Portable Near-Infrared Spectrometer and Transfer Learning Framework

Non-invasive Blood Glucose Measurement Scheme Based on Near-infrared Spectroscopy

Noninvasive blood glucose measurement system based on three wavelengths in near-infrared region

New advancement in noninvasive measurement of blood glucose by near-infrared spectroscopy

Conditions And Methods Of High Precision Measurement Of Blood Glucose Concentration Using Mid-Ir Atr Spectroscopy

Infrared-Based Non-Invasive Blood Glucose Measurement and Monitoring System

Determination of Glucose in Plasma by Dry Film-Based Fourier Transformed-Infrared Spectroscopy Coupled with Boosting Support Vector Regression

Novel non-invasive method of blood glucose measurement using FT-Mid-IR spectroscopy

Extraction of Glucose Information in Blood Glucose Measurement by Noninvasive Near-Infrared Spectra

Ways to improve measurement accuracy of blood glucose sensing by mid-infrared spectroscopy]

Noninvasive Blood Glucose Sensing on Human Body with Near-Infrared Reflection Spectroscopy

Noninvasive Measurement of Glucose in Artificial Plasma with Near-Infrared and Raman Spectroscopy

Experimental Research on OGTT for Non-invasive Blood Glucose Detection through Near-infrared Spectroscopy Ranging from 1100 nm to 1700 nm

In Vivo Nondestructive Measurement Of Blood Glucose By Near-Infrared Diffuse-Reflectance Spectroscopy

In Vitro Glucose Measurement Using Tunable Mid-Infrared Laser Spectroscopy Combined With Fiber-Optic Sensor

Classification of diabetes and measurement of blood glucose concentration noninvasively using near infrared spectroscopy